Aerosol samples of PM10 (particulate matter with aerodynamic diameters less than 10μm) and TSP (total suspended particles) were simultaneously collected from April 2001 to March 2002 at the top of Mount Baguan on the...Aerosol samples of PM10 (particulate matter with aerodynamic diameters less than 10μm) and TSP (total suspended particles) were simultaneously collected from April 2001 to March 2002 at the top of Mount Baguan on the downtown campus of Ocean University of China, Qingdao, China. The concentrations of Al, Fe, Mn, Cu, Pb and Zn were determined by means of inductively coupled plasma atomic emission spectrometry (ICP-AES). The monthly variability of the mass concentrations of aerosol particles and the concentrations of trace metals are presented and discussed. The distribution pattern of these metals in PM10 and TSP is also discussed. During the observation period, the mass concentration of PM10 at this site ranged from 13.80 to 306.42μgm-3 , while that of TSP ranged from 31.02 to 568.82μgm-3. Both PM10 and TSP reached their highest concentrations in springtime, while the lowest values occurred in summertime. The concentrations of crustal metals followed the same variation pattern, while those of anthropogenic metals did not. A closer examination led to the conclusion that anthropogenic metals are mainly from local sources. The average concentration ratios of anthropogenic metals in PM10 to TSP were higher than the average mass ratio of PM10 to TSP, suggesting that there was a higher proportion of anthropogenic metals on smaller particles although there were a few exceptions. For crustal metals, however, the metal concentration ratios were close to the particle mass ratio, indicating that the distribution of crustal metals was much more homogeneous on aerosol particles with different sizes. The correlation analysis indicated that Al, Fe and Mn were originated from similar sources and were mainly controlled by the particle mass, while Cu, Pb and Zn were predominated by local anthropogenic sources, with Pb and Zn having similar origins.展开更多
In recent years,air-foam combining the advantages of both liquid and air drilling has been utilized as a drilling medium. Air-foam drilling has proved its efficiency in numerous situations where serious problems were ...In recent years,air-foam combining the advantages of both liquid and air drilling has been utilized as a drilling medium. Air-foam drilling has proved its efficiency in numerous situations where serious problems were encountered,such as in fractured formations and depleted or high permeable zones. However,the major disadvantage of air-foam drilling system is that the foam can only be used once,so that an extremely large pit is required to contain the foam to allow sufficient room for cuttings and for the foam to dissipate. Moreover,it needs enormous volume prepared,consuming abundance of water and ingredient additives,which results in the high cost of foam drilling. The recycling foam fluid by using foam breaking technology is the only effective method to solve these problems associated with the known foam drilling. Various types of equipment and technique have been employed to suppress foam formation in biological and process equipment in foam drilling. The study described various methods of foam breaking technology,and the trend of the foam breaking technology for foam drilling is discussed.展开更多
In this paper, Henri Lefebvre＇s theorizations about representational space and representations of space will be employed to examine Hart Crane＇s imagination of them in The Bridge. First, according to Lefebvre, repre...In this paper, Henri Lefebvre＇s theorizations about representational space and representations of space will be employed to examine Hart Crane＇s imagination of them in The Bridge. First, according to Lefebvre, representations of space are created with violence for the purpose of accumulating capital. On the other hand, representational space is directly lived or affectively felt, opened up by inhabitants＇ imagination. In addition, Lefebvre points out that in abstract space, representational space will be invaded by representations of space. In The Bridge, Crane＇s affective experience with the Brooklyn Bridge or the subway indicates that he treats New York as a representational space. Besides, Crane expresses his concern for how capitalism has encroached on it. It would seem that Crane has followed Lefebvre＇s line of thinking in The Bridge. However, it is actually a specious analysis because both the Brooklyn Bridge and the subway are representations of space. And in this long poem, Crane feels the urban space through history, which plays a key role in creating representations of space. Thus, we can conclude that Crane is actually taking ＂a walk in between＂ in The Bridge. With his imagination, Crane has combined representations of space and representational space into his own poetic vision.展开更多
In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of ma...In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.49976020).
文摘Aerosol samples of PM10 (particulate matter with aerodynamic diameters less than 10μm) and TSP (total suspended particles) were simultaneously collected from April 2001 to March 2002 at the top of Mount Baguan on the downtown campus of Ocean University of China, Qingdao, China. The concentrations of Al, Fe, Mn, Cu, Pb and Zn were determined by means of inductively coupled plasma atomic emission spectrometry (ICP-AES). The monthly variability of the mass concentrations of aerosol particles and the concentrations of trace metals are presented and discussed. The distribution pattern of these metals in PM10 and TSP is also discussed. During the observation period, the mass concentration of PM10 at this site ranged from 13.80 to 306.42μgm-3 , while that of TSP ranged from 31.02 to 568.82μgm-3. Both PM10 and TSP reached their highest concentrations in springtime, while the lowest values occurred in summertime. The concentrations of crustal metals followed the same variation pattern, while those of anthropogenic metals did not. A closer examination led to the conclusion that anthropogenic metals are mainly from local sources. The average concentration ratios of anthropogenic metals in PM10 to TSP were higher than the average mass ratio of PM10 to TSP, suggesting that there was a higher proportion of anthropogenic metals on smaller particles although there were a few exceptions. For crustal metals, however, the metal concentration ratios were close to the particle mass ratio, indicating that the distribution of crustal metals was much more homogeneous on aerosol particles with different sizes. The correlation analysis indicated that Al, Fe and Mn were originated from similar sources and were mainly controlled by the particle mass, while Cu, Pb and Zn were predominated by local anthropogenic sources, with Pb and Zn having similar origins.
基金Project supported by the Key Science &Technology Research Program of Zhongyuan Petroleum Exploration Bureau (No.20083022)
文摘In recent years,air-foam combining the advantages of both liquid and air drilling has been utilized as a drilling medium. Air-foam drilling has proved its efficiency in numerous situations where serious problems were encountered,such as in fractured formations and depleted or high permeable zones. However,the major disadvantage of air-foam drilling system is that the foam can only be used once,so that an extremely large pit is required to contain the foam to allow sufficient room for cuttings and for the foam to dissipate. Moreover,it needs enormous volume prepared,consuming abundance of water and ingredient additives,which results in the high cost of foam drilling. The recycling foam fluid by using foam breaking technology is the only effective method to solve these problems associated with the known foam drilling. Various types of equipment and technique have been employed to suppress foam formation in biological and process equipment in foam drilling. The study described various methods of foam breaking technology,and the trend of the foam breaking technology for foam drilling is discussed.
文摘In this paper, Henri Lefebvre＇s theorizations about representational space and representations of space will be employed to examine Hart Crane＇s imagination of them in The Bridge. First, according to Lefebvre, representations of space are created with violence for the purpose of accumulating capital. On the other hand, representational space is directly lived or affectively felt, opened up by inhabitants＇ imagination. In addition, Lefebvre points out that in abstract space, representational space will be invaded by representations of space. In The Bridge, Crane＇s affective experience with the Brooklyn Bridge or the subway indicates that he treats New York as a representational space. Besides, Crane expresses his concern for how capitalism has encroached on it. It would seem that Crane has followed Lefebvre＇s line of thinking in The Bridge. However, it is actually a specious analysis because both the Brooklyn Bridge and the subway are representations of space. And in this long poem, Crane feels the urban space through history, which plays a key role in creating representations of space. Thus, we can conclude that Crane is actually taking ＂a walk in between＂ in The Bridge. With his imagination, Crane has combined representations of space and representational space into his own poetic vision.
基金supported by the National Natural Science Foundation of China(No.61274063)
文摘In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.
