Performances and efficiencies of displacement ventilation(DV) and partial ventilation(PV) for industrial halls of different configurations as well as the heat and mass transports within the industrial halls were numer...Performances and efficiencies of displacement ventilation(DV) and partial ventilation(PV) for industrial halls of different configurations as well as the heat and mass transports within the industrial halls were numerically investigated. Three levels of Rayleigh number(5.8×1010, 1.0×1012 and 2.1×1012) and two values of source contaminant flux(5 mg/s and 50 mg/s) were considered. The inlet Reynolds numbers were 2×104, 5×104, 1.5×105 and 4.5×105 for DV and 5×105, 1×106, 2×106 and 4×106 for PV, respectively. From the results, it is concluded that the above parameters have very complex impacts on the conjugated heat and mass transports. From points of view of acceptable indoor air quality and ventilation efficiency, PV at Re=1×106 with side-located sources and 65% of the supply air extracted through floor level outlets is the best choice when Ra=5.8×1010. However, DVs at Re=5×104 and Re=1.5×105with center-located sources and floor-mounted air suppliers are the best choices for Ra=1.0×1012 and Ra=2.1×1012, respectively. When source contaminant flux reaches 50 mg/s, local extraction as a supplement of general ventilation is recommended. The results can be a first approximation to 3D numerical investigation and preliminary ventilation system design guidelines for high-rise industrial halls.展开更多
The regional air quality modeling system RAMS-CMAQ(Regional Atmospheric Modeling System and Models-3 Community Multi-scale Air Quality) was developed by incorporating a vegetation photosynthesis and respiration module...The regional air quality modeling system RAMS-CMAQ(Regional Atmospheric Modeling System and Models-3 Community Multi-scale Air Quality) was developed by incorporating a vegetation photosynthesis and respiration module(VPRM) and used to simulate temporal-spatial variations in atmospheric CO2 concentrations in East Asia,with prescribed surface CO2 fluxes(i.e.,fossil fuel emission,biomass burning,sea-air CO2 exchange,and terrestrial biosphere CO2 flux).Comparison of modeled CO2 mixing ratios with eight ground-based in-situ measurements demonstrated that the model was able to capture most observed CO2 temporal-spatial features.Simulated CO2 concentrations were generally in good agreement with observed concentrations.Results indicated that the accumulated impacts of anthropogenic emissions contributed more to increased CO2 concentrations in urban regions relative to remote locations.Moreover,RAMS-CMAQ analysis demonstrates that surface CO2 concentrations in East Asia are strongly influenced by terrestrial ecosystems.展开更多
基金Project(2011BAJ03B07)supported by National Twelve Five-year Science and Technology Support Program of ChinaProject supported by the China Scholarship Council+1 种基金Project(51276057,51376198)supported by the National Natural Science Foundation of ChinaProject(CX2014B064)supported by Hunan Provincial Innovation Foundation for Postgraduate,China
文摘Performances and efficiencies of displacement ventilation(DV) and partial ventilation(PV) for industrial halls of different configurations as well as the heat and mass transports within the industrial halls were numerically investigated. Three levels of Rayleigh number(5.8×1010, 1.0×1012 and 2.1×1012) and two values of source contaminant flux(5 mg/s and 50 mg/s) were considered. The inlet Reynolds numbers were 2×104, 5×104, 1.5×105 and 4.5×105 for DV and 5×105, 1×106, 2×106 and 4×106 for PV, respectively. From the results, it is concluded that the above parameters have very complex impacts on the conjugated heat and mass transports. From points of view of acceptable indoor air quality and ventilation efficiency, PV at Re=1×106 with side-located sources and 65% of the supply air extracted through floor level outlets is the best choice when Ra=5.8×1010. However, DVs at Re=5×104 and Re=1.5×105with center-located sources and floor-mounted air suppliers are the best choices for Ra=1.0×1012 and Ra=2.1×1012, respectively. When source contaminant flux reaches 50 mg/s, local extraction as a supplement of general ventilation is recommended. The results can be a first approximation to 3D numerical investigation and preliminary ventilation system design guidelines for high-rise industrial halls.
基金supported by the Strategic Priority Research Program-Climate Change:Carbon Budget and Relevant Issues (Grant No.XDA05040404)the National Natural Science Foundation of China (Grant No.41130528)
文摘The regional air quality modeling system RAMS-CMAQ(Regional Atmospheric Modeling System and Models-3 Community Multi-scale Air Quality) was developed by incorporating a vegetation photosynthesis and respiration module(VPRM) and used to simulate temporal-spatial variations in atmospheric CO2 concentrations in East Asia,with prescribed surface CO2 fluxes(i.e.,fossil fuel emission,biomass burning,sea-air CO2 exchange,and terrestrial biosphere CO2 flux).Comparison of modeled CO2 mixing ratios with eight ground-based in-situ measurements demonstrated that the model was able to capture most observed CO2 temporal-spatial features.Simulated CO2 concentrations were generally in good agreement with observed concentrations.Results indicated that the accumulated impacts of anthropogenic emissions contributed more to increased CO2 concentrations in urban regions relative to remote locations.Moreover,RAMS-CMAQ analysis demonstrates that surface CO2 concentrations in East Asia are strongly influenced by terrestrial ecosystems.
