In order to predict the long-term rutting of asphalt pavement, the effective temperature for pavement rutting is calculated using the numerical simulation method. The transient temperature field of asphalt pavement wa...In order to predict the long-term rutting of asphalt pavement, the effective temperature for pavement rutting is calculated using the numerical simulation method. The transient temperature field of asphalt pavement was simulated based on actual meteorological data of Nanjing. 24-hour rutting development under a transient temperature field was calculated in each month. The rutting depth accumulated under the static temperature field was also estimated and the relationship between constant temperature parameters was analyzed. Then the effective temperature for pavement rutting was determined based on the rutting equivalence principle. The results show that the monthly effective temperature is above 40 t in July and August, while in June and September it ranges from 30 to 40 Rutting development can be ignored when the monthly effective temperature is less than 30 t. The yearly effective temperature for rutting in Nanjing is around 38. 5 t. The long-term rutting prediction model based on the effective temperature can reflect the influences of meteorological factors and traffic time distribution.展开更多
Based on a new semi empirical analytical method, namely equivalent doping transformation, the breakdown voltage and the peak field of the epitaxial diffused punch through junction have been obtained. The basic prin...Based on a new semi empirical analytical method, namely equivalent doping transformation, the breakdown voltage and the peak field of the epitaxial diffused punch through junction have been obtained. The basic principle of this method is introduced and a set of breakdown voltage and peak field plots are provided for the optimum design of the low voltage power devices. It shows that the analytical results coincide with the previous numerical simulation well.展开更多
This paper presented a rule merging and simplifying method and an improved analysis deviation algorithm. The fuzzy equivalence theory avoids the rigid way (either this or that) of traditional equivalence theory. Durin...This paper presented a rule merging and simplifying method and an improved analysis deviation algorithm. The fuzzy equivalence theory avoids the rigid way (either this or that) of traditional equivalence theory. During a data cleaning process task, some rules exist such as included/being included relations with each other. The equivalence degree of the being-included rule is smaller than that of the including rule, so a rule merging and simplifying method is introduced to reduce the total computing time. And this kind of relation will affect the deviation of fuzzy equivalence degree. An improved analysis deviation algorithm that omits the influence of the included rules' equivalence degree was also presented. Normally the duplicate records are logged in a file, and users have to check and verify them one by one. It's time-cost. The proposed algorithm can save users' labor during duplicate records checking. Finally, an experiment was presented which demonstrates the possibility of the rule.展开更多
By studying different compressive strengths and changes in the characteristics of rocks,five variables were selected to predict faults in coal mines. Drillholes in the mined area were divided into two populations, i.e...By studying different compressive strengths and changes in the characteristics of rocks,five variables were selected to predict faults in coal mines. Drillholes in the mined area were divided into two populations, i.e., drillholes containing faults and drillholes without faults. Discriminant functions were established from the values of the five variables using Fisher's approach. Drillholes in the non-mined areas were allocated to one of the two populations by using discriminant functions. The terrenes of each drillhole were divided into 10 sections, above and below a minable coal seam. Each section has 10 layers of rocks. The population to which each drillhole in a section belongs is sorted out and the probability of each drillhole with faults obtained,i.e., a contour map of predicting the probability of faults in coal mining is shown. A comparison with the real distribution of faults shows that the precision of accurately predicting faults is greater than 70 per cent.展开更多
Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, tw...Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, two quadrant baffle schemes, and two continuous helical baffle schemes. The temperature contour or the pressure contour and velocity contour plots with superimposed velocity vectors on meridian, transverse and unfolded concentric hexagonal slices are presented to obtain a full angular view. For the six helix baffled heat exchangers,the different patterns of the single vortex secondary flow and the shortcut leakage flow were depicted as well as the heat transfer properties were compared. The results show that the optimum scheme among the six configurations is a circumferential overlap trisection helix baffled heat exchanger with a baffle incline angle of 20°(20°TCO) scheme with an anti-shortcut baffle structure, which exhibits the second highest pressure dropΔpo, the highest overall heat transfer coefficient K, shell-side heat transfer coefficient hoand shell-side average comprehensive index ho/Δpo.展开更多
Granular computing is a very hot research field in recent years. In our previous work an algebraic quotient space model was proposed,where the quotient structure could not be deduced if the granulation was based on an...Granular computing is a very hot research field in recent years. In our previous work an algebraic quotient space model was proposed,where the quotient structure could not be deduced if the granulation was based on an equivalence relation. In this paper,definitions were given and formulas of the lower quotient congruence and upper quotient congruence were calculated to roughly represent the quotient structure. Then the accuracy and roughness were defined to measure the quotient structure in quantification. Finally,a numerical example was given to demonstrate that the rough representation and measuring methods are efficient and applicable. The work has greatly enriched the algebraic quotient space model and granular computing theory.展开更多
In order to reduce the noise and vibration of the diesel engine,it is crucial to exactly identify the engine noise source character.Based on "two-microphone" method,the sound intensity measurement of a vehic...In order to reduce the noise and vibration of the diesel engine,it is crucial to exactly identify the engine noise source character.Based on "two-microphone" method,the sound intensity measurement of a vehicle four-stroke diesel engine was carried out in a hemi-anechoic chamber.Then the sound intensity contour maps were obtained from the measurement results and the main noise components of different frequencies on all the measurement surfaces were picked out to construct contour maps.By analysizing the relationship between the characteristics of contour maps and the space distribution of the engine compartment,the major sources of the exterior radiation noise of the diesel engine were identified.The results provided a creditable basis for improving the noise performance of the engine in the next phase.展开更多
To simplify the transient stability analysis of a large-scale power system and realize real-time emergency control,a fast transient stability simulation algorithm based on real-time dynamic equivalence is proposed.Gen...To simplify the transient stability analysis of a large-scale power system and realize real-time emergency control,a fast transient stability simulation algorithm based on real-time dynamic equivalence is proposed.Generator models are grouped and aggregated according to a fast numerical integration.A fast calculation method of the admittance matrix is then proposed to calculate the parameters of an equivalent system,and numerical integration is performed using the obtained equivalent system.Then,based on integral sensitivity,a new fast emergency control strategy is proposed for the equivalent system.The final emergency control strategy is obtained by mapping the control strategy for the equivalent system back to the original system.The results of a simulation on an East China Power System that includes 496 generators and 5075 buses show that the suggested algorithm can output an accurate transient stability simulation result and form an effective emergency control strategy.The proposed algorithm is much faster than the existing solutions and has the potential to be used for online pre-decision.展开更多
The rapid development of aviation and aerospace technologies has led to increased interest in the application of numerically controlled(NC) technology for bending light-weight titanium alloy tubes.In order to study an...The rapid development of aviation and aerospace technologies has led to increased interest in the application of numerically controlled(NC) technology for bending light-weight titanium alloy tubes.In order to study and develop advanced NC bending technology,it is necessary to understand the bending performance of medium strength TA18(Ti-3Al-2.5V,ASTM Gr.9) titanium alloy tubes during NC bending under different die sets.This paper focuses on the bending performance of medium strength TA18 tubes under different NC bending die sets,including the variations in the stress,strain,wall thickness,cross sectional deformation,and defects.The results show that adding a wiper die to the base die set decreases the radial,hoop,and tangential compressive stress and the tangential compressive strain,and adding a mandrel to the base die set also decreases these stresses,but increases the radial and hoop tensile stress and decreases the hoop compressive strain obviously,and brings about a three-dimensional tensile stress concentration where the mandrel provides support.For the NC bending of medium strength TA18 tubes,the flattening of cross section is more sensitive index than the thinning of wall thickness.Introducing a mandrel can improve the flattening of cross section obviously but it has a little worse effect on the thinning of wall thickness,and adding a wiper die to the base die set can inhibit the occurrence of the inside bulge but worsen the flattening of the cross section remarkably.Considering the above effects of the mandrel and wiper die on bending performance,it is reasonable to apply the die set comprising a bending die,clamp die,and pressure die for tubes with a small diameter and the die set including an appropriate mandrel additionally for tubes with a larger diameter,in order to bend the medium strength TA18 tubes with high quality and at low cost.展开更多
The temperature characteristics of near infrared surface plasmon resonance （SPR） sensors with Kretschmann configuration are studied theoretically and experimentally. The experimental results match with the numerical...The temperature characteristics of near infrared surface plasmon resonance （SPR） sensors with Kretschmann configuration are studied theoretically and experimentally. The experimental results match with the numerical simulations in the temperature range from 10 ℃ to 40.℃. With the increase of temperature, the resonance angle for gas increases slightly, but that for aqueous solution decreases obviously. No matter the dielectric layer is gas or aqueous solution, the resonance peaks are both broadened.展开更多
基金The National Natural Science Foundation of China(No.51378121)the Fok Ying Tung Education Foundation(No.141076)the Scientific Innovation Research of College Graduates in Jiangsu Province(No.KYLX_0164)
文摘In order to predict the long-term rutting of asphalt pavement, the effective temperature for pavement rutting is calculated using the numerical simulation method. The transient temperature field of asphalt pavement was simulated based on actual meteorological data of Nanjing. 24-hour rutting development under a transient temperature field was calculated in each month. The rutting depth accumulated under the static temperature field was also estimated and the relationship between constant temperature parameters was analyzed. Then the effective temperature for pavement rutting was determined based on the rutting equivalence principle. The results show that the monthly effective temperature is above 40 t in July and August, while in June and September it ranges from 30 to 40 Rutting development can be ignored when the monthly effective temperature is less than 30 t. The yearly effective temperature for rutting in Nanjing is around 38. 5 t. The long-term rutting prediction model based on the effective temperature can reflect the influences of meteorological factors and traffic time distribution.
文摘Based on a new semi empirical analytical method, namely equivalent doping transformation, the breakdown voltage and the peak field of the epitaxial diffused punch through junction have been obtained. The basic principle of this method is introduced and a set of breakdown voltage and peak field plots are provided for the optimum design of the low voltage power devices. It shows that the analytical results coincide with the previous numerical simulation well.
文摘This paper presented a rule merging and simplifying method and an improved analysis deviation algorithm. The fuzzy equivalence theory avoids the rigid way (either this or that) of traditional equivalence theory. During a data cleaning process task, some rules exist such as included/being included relations with each other. The equivalence degree of the being-included rule is smaller than that of the including rule, so a rule merging and simplifying method is introduced to reduce the total computing time. And this kind of relation will affect the deviation of fuzzy equivalence degree. An improved analysis deviation algorithm that omits the influence of the included rules' equivalence degree was also presented. Normally the duplicate records are logged in a file, and users have to check and verify them one by one. It's time-cost. The proposed algorithm can save users' labor during duplicate records checking. Finally, an experiment was presented which demonstrates the possibility of the rule.
基金Project 40772198 supported by the National Natural Science Foundation of China
文摘By studying different compressive strengths and changes in the characteristics of rocks,five variables were selected to predict faults in coal mines. Drillholes in the mined area were divided into two populations, i.e., drillholes containing faults and drillholes without faults. Discriminant functions were established from the values of the five variables using Fisher's approach. Drillholes in the non-mined areas were allocated to one of the two populations by using discriminant functions. The terrenes of each drillhole were divided into 10 sections, above and below a minable coal seam. Each section has 10 layers of rocks. The population to which each drillhole in a section belongs is sorted out and the probability of each drillhole with faults obtained,i.e., a contour map of predicting the probability of faults in coal mining is shown. A comparison with the real distribution of faults shows that the precision of accurately predicting faults is greater than 70 per cent.
基金Supported by the National Natural Science Foundation of China(50976022,51276035)the Provincial Science and Technology Innovation and Transformation of Achievements of Special Fund Project of Jiangsu Province(BY2011155)
文摘Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, two quadrant baffle schemes, and two continuous helical baffle schemes. The temperature contour or the pressure contour and velocity contour plots with superimposed velocity vectors on meridian, transverse and unfolded concentric hexagonal slices are presented to obtain a full angular view. For the six helix baffled heat exchangers,the different patterns of the single vortex secondary flow and the shortcut leakage flow were depicted as well as the heat transfer properties were compared. The results show that the optimum scheme among the six configurations is a circumferential overlap trisection helix baffled heat exchanger with a baffle incline angle of 20°(20°TCO) scheme with an anti-shortcut baffle structure, which exhibits the second highest pressure dropΔpo, the highest overall heat transfer coefficient K, shell-side heat transfer coefficient hoand shell-side average comprehensive index ho/Δpo.
基金Supported by the National Natural Science Foundation of China(No.61772031)the Special Energy Saving Foundation of Changsha,Hunan Province in 2017
文摘Granular computing is a very hot research field in recent years. In our previous work an algebraic quotient space model was proposed,where the quotient structure could not be deduced if the granulation was based on an equivalence relation. In this paper,definitions were given and formulas of the lower quotient congruence and upper quotient congruence were calculated to roughly represent the quotient structure. Then the accuracy and roughness were defined to measure the quotient structure in quantification. Finally,a numerical example was given to demonstrate that the rough representation and measuring methods are efficient and applicable. The work has greatly enriched the algebraic quotient space model and granular computing theory.
基金supported by programfor the Top Young Academic Leaders of Higher Learning Institutions of Shanxi(2009)Natural Science Foundation of Shanxi Province,China(No.2010011031-2)
文摘In order to reduce the noise and vibration of the diesel engine,it is crucial to exactly identify the engine noise source character.Based on "two-microphone" method,the sound intensity measurement of a vehicle four-stroke diesel engine was carried out in a hemi-anechoic chamber.Then the sound intensity contour maps were obtained from the measurement results and the main noise components of different frequencies on all the measurement surfaces were picked out to construct contour maps.By analysizing the relationship between the characteristics of contour maps and the space distribution of the engine compartment,the major sources of the exterior radiation noise of the diesel engine were identified.The results provided a creditable basis for improving the noise performance of the engine in the next phase.
文摘To simplify the transient stability analysis of a large-scale power system and realize real-time emergency control,a fast transient stability simulation algorithm based on real-time dynamic equivalence is proposed.Generator models are grouped and aggregated according to a fast numerical integration.A fast calculation method of the admittance matrix is then proposed to calculate the parameters of an equivalent system,and numerical integration is performed using the obtained equivalent system.Then,based on integral sensitivity,a new fast emergency control strategy is proposed for the equivalent system.The final emergency control strategy is obtained by mapping the control strategy for the equivalent system back to the original system.The results of a simulation on an East China Power System that includes 496 generators and 5075 buses show that the suggested algorithm can output an accurate transient stability simulation result and form an effective emergency control strategy.The proposed algorithm is much faster than the existing solutions and has the potential to be used for online pre-decision.
基金supported by the Program for New Century Excellent Talents in University of China (NCET-08-0462)the Fund of the State Key Laboratory of Solidification Processing in NWPU (Grant No. KP200919)the 111 Project of China (B08040)
文摘The rapid development of aviation and aerospace technologies has led to increased interest in the application of numerically controlled(NC) technology for bending light-weight titanium alloy tubes.In order to study and develop advanced NC bending technology,it is necessary to understand the bending performance of medium strength TA18(Ti-3Al-2.5V,ASTM Gr.9) titanium alloy tubes during NC bending under different die sets.This paper focuses on the bending performance of medium strength TA18 tubes under different NC bending die sets,including the variations in the stress,strain,wall thickness,cross sectional deformation,and defects.The results show that adding a wiper die to the base die set decreases the radial,hoop,and tangential compressive stress and the tangential compressive strain,and adding a mandrel to the base die set also decreases these stresses,but increases the radial and hoop tensile stress and decreases the hoop compressive strain obviously,and brings about a three-dimensional tensile stress concentration where the mandrel provides support.For the NC bending of medium strength TA18 tubes,the flattening of cross section is more sensitive index than the thinning of wall thickness.Introducing a mandrel can improve the flattening of cross section obviously but it has a little worse effect on the thinning of wall thickness,and adding a wiper die to the base die set can inhibit the occurrence of the inside bulge but worsen the flattening of the cross section remarkably.Considering the above effects of the mandrel and wiper die on bending performance,it is reasonable to apply the die set comprising a bending die,clamp die,and pressure die for tubes with a small diameter and the die set including an appropriate mandrel additionally for tubes with a larger diameter,in order to bend the medium strength TA18 tubes with high quality and at low cost.
基金supported by the National Natural Science Foundation of China(No.61177076)the Fundamental Research Funds for the Central Universities(Nos.2013-Ia-038,2013-Ia-006 and 2013-ZY-121)
文摘The temperature characteristics of near infrared surface plasmon resonance （SPR） sensors with Kretschmann configuration are studied theoretically and experimentally. The experimental results match with the numerical simulations in the temperature range from 10 ℃ to 40.℃. With the increase of temperature, the resonance angle for gas increases slightly, but that for aqueous solution decreases obviously. No matter the dielectric layer is gas or aqueous solution, the resonance peaks are both broadened.
