期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
钎焊降温速率对板翅结构钎焊残余应力和等效热变形的影响规律 被引量:1
1
作者 代忠华 刘新文 +2 位作者 麻宏强 王丽 张春娥 《兰州理工大学学报》 CAS 北大核心 2022年第1期65-70,共6页
为了研究不同钎焊降温速率对板翅结构内部的钎焊残余应力和等效弹性热应变的影响规律.建立了板翅结构的三维热应力分析模型,采用热-结构耦合的方法,模拟分析了不同钎焊降温速率下,钎焊残余应力和等效弹性热应变的变化情况.研究结果表明... 为了研究不同钎焊降温速率对板翅结构内部的钎焊残余应力和等效弹性热应变的影响规律.建立了板翅结构的三维热应力分析模型,采用热-结构耦合的方法,模拟分析了不同钎焊降温速率下,钎焊残余应力和等效弹性热应变的变化情况.研究结果表明:板翅结构内部的钎焊残余应力随着钎焊降温速率的减小而减小;不同钎焊降温速率下,板翅结构内部的钎焊残余应力之间的差值也不同,当钎焊降温速率小于某一值时,板翅结构内部的钎焊残余应力的大小将近似为定值;钎焊降温速率越小,板翅结构内部薄弱部位发生断裂的风险性就越小;钎焊降温速率对板翅结构的等效弹性热应变的影响较小. 展开更多
关键词 钎焊降温速率 板翅结构 钎焊残余应力 等效弹性应变
下载PDF
某水库大坝部分坝体抬升成因分析及仿真模拟 被引量:1
2
作者 蔡荨 周克发 《水电能源科学》 北大核心 2018年第2期97-100,155,共5页
某水库蓄水之后,通过坝体表面变形测点监测到部分坝体表面持续抬升,造成大坝部分坝段下游坡马道上侧排水沟护砌块石受坝坡变形挤压存在倾斜现象,其中部分坝段倾斜严重。在现场调查的基础上,结合大坝安全监测与检测资料,考虑包括库水位... 某水库蓄水之后,通过坝体表面变形测点监测到部分坝体表面持续抬升,造成大坝部分坝段下游坡马道上侧排水沟护砌块石受坝坡变形挤压存在倾斜现象,其中部分坝段倾斜严重。在现场调查的基础上,结合大坝安全监测与检测资料,考虑包括库水位变化、坝体渗流场变化、地形地貌、地层岩性及坝基岩体应力等因素,初步认定坝体表面抬升是由于坝基岩体在渗漏条件下吸水膨胀所致。进而通过现场坝基取样试验检测坝基岩体膨胀情况,并结合大型通用有限元软件ANSYS,采用等效热应变模拟坝基岩体膨胀特性,与实际观测资料进行对比,在修正的材料力学参数基础上,拟合了坝基岩体的膨胀系数,较好地模拟了坝体表面变形,验证了坝基岩体膨胀这一结论的合理性。 展开更多
关键词 坝体抬升 膨胀 有限元方法 等效热应变
下载PDF
Enhanced magnetocaloric performances and tunable martensitic transformation in Ni_(35)Co_(15)Mn_(35-x)Fe_(x)Ti_(15) all-d-metal Heusler alloys by chemical and physical pressures 被引量:1
3
作者 Yong Li Liang Qin +1 位作者 Siyuan Huang Lingwei Li 《Science China Materials》 SCIE EI CAS CSCD 2022年第2期486-493,共8页
The solid-state magnetic cooling(MC)method based on the magnetocaloric effect(MCE)is recognized as an environmentally friendly and high-energy-efficiency technology.The search or design of suitable magnetic materials ... The solid-state magnetic cooling(MC)method based on the magnetocaloric effect(MCE)is recognized as an environmentally friendly and high-energy-efficiency technology.The search or design of suitable magnetic materials with large MCEs is one of the main targets at present.In this work,we apply the chemical and hydrostatic pressures in the Ni_(35)Co_(15)Mn_(35-x)Fe_(x)Ti_(15) all-d-metal Heusler alloys and systematically investigate their crystal structures,phases,and magnetocaloric performances experimentally and theoretically.All the alloys are found to crystallize in an ordered B2-type structure at room temperature and the atoms of Fe are confirmed to all occupy at sites Mn(B).The total magnetic moments decrease gradually with increasing Fe content and decreasing of volume as well.The martensitic transformation temperature decreases with the increase of Fe content,whereas increases with increasing hydrostatic pressure.Moreover,obviously enhanced magnetocaloric performances can also be obtained by applied pressures.The maximum values of magnetic entropy change and refrigeration capacity are as high as 15.61(24.20)J(kg K)^(−1) and 109.91(347.26)J kg^(−1) withΔH=20(50)kOe,respectively.These magnetocaloric performances are superior to most of the recently reported famous materials,indicating the potential application for active MC. 展开更多
关键词 magnetocaloric performances magnetic properties pressure effects magnetocaloric effect all-d-metal Heusler alloys
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部