期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
大功率Nd:YAG激光深熔焊接过程中同轴辐射光的采集 被引量:6
1
作者 秦国梁 徐晨明 +2 位作者 董红刚 杨永波 王旭友 《应用激光》 CSCD 北大核心 2003年第4期205-208,共4页
同轴信息监测是一种直接对熔池和小孔进行监测的方法。本文介绍了激光深熔焊接过程中 ,同轴信号的采集原理和光路设计 ,利用同轴信息采集光路的激光焊接镜头采集了大功率Nd :YAG激光焊接过程中辐射的同轴光信号。对Q2 35钢激光深熔焊接... 同轴信息监测是一种直接对熔池和小孔进行监测的方法。本文介绍了激光深熔焊接过程中 ,同轴信号的采集原理和光路设计 ,利用同轴信息采集光路的激光焊接镜头采集了大功率Nd :YAG激光焊接过程中辐射的同轴光信号。对Q2 35钢激光深熔焊接过程中 ,从焊接熔池和等离子体中辐射的同轴光谱曲线是以连续谱为背景谱 ,当焊接参数的变化时 ,同轴辐射光的相对光强发生变化 ,而其与波长的对应关系没有变化。在激光深熔点焊过程中同时采集了同轴和水平辐射的光强信息 ,对比发现二者具有不同的峰值波长 ,并且在 5 5 0nm~ 5 80nm的波段内 。 展开更多
关键词 ND:YAG激 深熔焊接 同轴辐射 焊接熔池 等离子体辐射光
原文传递
Spectroscopic Diagnostic of Spark Discharge Plasma at Atmospheric Pressure 被引量:1
2
作者 Laslov Geza Shuaibov Alexander +1 位作者 Szegedi Szendor Laszlo Elemer 《Journal of Chemistry and Chemical Engineering》 2014年第3期302-305,共4页
The emission of CuInSe2-based spark discharge plasma at atmospheric pressure in air has been investigated by optical emission spectroscopy method. The plasma was formed by action of the high voltage pulse generator (... The emission of CuInSe2-based spark discharge plasma at atmospheric pressure in air has been investigated by optical emission spectroscopy method. The plasma was formed by action of the high voltage pulse generator (with nanosecond pulse) on the corresponding electrodes (CulnSe2 compound). The emission characteristics have been obtained for the spark discharge plasma at 3 mm interelectrode distance. It was established that the spark discharge plasma radiation was determined by decay products of the compound from which electrodes were made. The most suitable spectral lines for plasma diagnostics is atomic copper lines in the visible spectrum and atomic indium lines in UV (ultraviolet) and visible spectrum. 展开更多
关键词 Spark discharge optical emission spectroscopy emission characteristic excited states CulnSe_ compound.
下载PDF
A Model for Extreme Ultraviolet Radiation Conversion Efficiency From Laser Produced Mass-Limited Tin-Based Droplet Target Plasmas
3
作者 吴涛 王新兵 +1 位作者 余仕成 熊伦 《Communications in Theoretical Physics》 SCIE CAS CSCD 2012年第4期695-700,共6页
Simple arguments are used to construct a model to explain the extreme ultraviolet radiation conversion efficiency(EUV-CE) of a tin-based droplet target laser produced plasmas by calculating the laser absorption effici... Simple arguments are used to construct a model to explain the extreme ultraviolet radiation conversion efficiency(EUV-CE) of a tin-based droplet target laser produced plasmas by calculating the laser absorption efficiency,radiation efficiency,and spectral efficiency.The dependence of drive laser pulse duration and laser intensity on EUV-CE is investigated.The results show that at some appropriate laser intensity,where the sum energy of the thermal conduction,out-off band radiation and plasma plume kinetic losses is at a minimum,the EUV-CE should reach a maximum.The EUV-CE predicted by the present simple model is also compared with the available experimental and simulation data and a fair agreement between them is found. 展开更多
关键词 conversion efficiency laser produced plasma extreme ultraviolet lithography
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部