The permeability of coal of middle to high ranks were tested using He,CH 4 and H 2O in single phase medium and using CH 4 and H 2O in double phase medium. The relation between adsorption and permeability of those medi...The permeability of coal of middle to high ranks were tested using He,CH 4 and H 2O in single phase medium and using CH 4 and H 2O in double phase medium. The relation between adsorption and permeability of those media was discussed, and the seepage flow characteristics of methane-water medium in coals were analyzed. The result shows that the coalbed methane resource of high-rank coal reservoirs in China is still recoverable.展开更多
Carbon-carbon composite （C/C） materials are prone to severe oxidation and volatilization problems. To address these issues, mullite （3Al2O3.2SiO2）/silicon carbide （SIC） coatings were deposited on C/C composite s...Carbon-carbon composite （C/C） materials are prone to severe oxidation and volatilization problems. To address these issues, mullite （3Al2O3.2SiO2）/silicon carbide （SIC） coatings were deposited on C/C composite substrates characterized into high and low densities. The coatings were applied by a two-step approach： pack cementation and silica sol based slurry coating processes. The relationship between the microstructure of 3Al2O3·2SiO2/SiC coatings and C/C substrates during isothermal oxidation cycle at 1 500 ℃ was investigated using X-ray diffractometer （XRD） and scanning electron microscope （SEM） mounted with energy dispersive spectrometer （EDS）. The results indicate that the density of the substrates has a marked effect on the coatings. Dense, thick and well-bonded coatings are obtained in the high density substrate. After 106 h of isothermal oxidation, the high density substrate with 3Al2O3-2SiO2/SiC coating offers effective protection as compared to low density substrate suffering recession.展开更多
Isothermal compression tests are applied to study the deformation mechanisms of TCll titanium alloy with lamellar structure under the deformation temperature range of 890-995 ℃ and strain rate range of 0.01-10 s^-1. ...Isothermal compression tests are applied to study the deformation mechanisms of TCll titanium alloy with lamellar structure under the deformation temperature range of 890-995 ℃ and strain rate range of 0.01-10 s^-1. According to the flow stress data obtained by compression tests, the deformation activations are calculated based on kinetics analysis of high temperature deformation, which are then used for deformation mechanism analysis combined with microstructure investigation. The results show that deformation mechanisms vary with deformation conditions： at low strain rate range, the deformation mechanism is mainly dislocation slip; at low temperature and high strain rate range, twinning is the main mechanism; at high temperature and high strain rate range, the deformation is mainly controlled by diffusion offl phase.展开更多
In this paper,we focus on studying weighted Poincare inequalities on stratified Lie groups.We derive various Poincaréinequalities in the case 1<p=q<∞ in the high order Sobolev space Wm,p.We derive several ...In this paper,we focus on studying weighted Poincare inequalities on stratified Lie groups.We derive various Poincaréinequalities in the case 1<p=q<∞ in the high order Sobolev space Wm,p.We derive several Poincare inequalities that complement existing results,which have only been proved for the case 1<p<q<∞.展开更多
基金National Natural Science Foundation of China(4 0 2 42 0 12 ,5 0 13 40 40 )
文摘The permeability of coal of middle to high ranks were tested using He,CH 4 and H 2O in single phase medium and using CH 4 and H 2O in double phase medium. The relation between adsorption and permeability of those media was discussed, and the seepage flow characteristics of methane-water medium in coals were analyzed. The result shows that the coalbed methane resource of high-rank coal reservoirs in China is still recoverable.
基金Project(2011CB605805) supported by the National Basic Research Program of ChinaProject(51021063) supported by the Creative Research Group of National Natural Science Foundation of China
文摘Carbon-carbon composite （C/C） materials are prone to severe oxidation and volatilization problems. To address these issues, mullite （3Al2O3.2SiO2）/silicon carbide （SIC） coatings were deposited on C/C composite substrates characterized into high and low densities. The coatings were applied by a two-step approach： pack cementation and silica sol based slurry coating processes. The relationship between the microstructure of 3Al2O3·2SiO2/SiC coatings and C/C substrates during isothermal oxidation cycle at 1 500 ℃ was investigated using X-ray diffractometer （XRD） and scanning electron microscope （SEM） mounted with energy dispersive spectrometer （EDS）. The results indicate that the density of the substrates has a marked effect on the coatings. Dense, thick and well-bonded coatings are obtained in the high density substrate. After 106 h of isothermal oxidation, the high density substrate with 3Al2O3-2SiO2/SiC coating offers effective protection as compared to low density substrate suffering recession.
文摘Isothermal compression tests are applied to study the deformation mechanisms of TCll titanium alloy with lamellar structure under the deformation temperature range of 890-995 ℃ and strain rate range of 0.01-10 s^-1. According to the flow stress data obtained by compression tests, the deformation activations are calculated based on kinetics analysis of high temperature deformation, which are then used for deformation mechanism analysis combined with microstructure investigation. The results show that deformation mechanisms vary with deformation conditions： at low strain rate range, the deformation mechanism is mainly dislocation slip; at low temperature and high strain rate range, twinning is the main mechanism; at high temperature and high strain rate range, the deformation is mainly controlled by diffusion offl phase.
文摘In this paper,we focus on studying weighted Poincare inequalities on stratified Lie groups.We derive various Poincaréinequalities in the case 1<p=q<∞ in the high order Sobolev space Wm,p.We derive several Poincare inequalities that complement existing results,which have only been proved for the case 1<p<q<∞.
