In the near future, fresh water will be very difficult to get and scarce. It is said that in 2025 half of the mankind will live in the areas where fresh water is not enough. Also, UN and WMO （World Meteorological Org...In the near future, fresh water will be very difficult to get and scarce. It is said that in 2025 half of the mankind will live in the areas where fresh water is not enough. Also, UN and WMO （World Meteorological Organization） are predicting five billion people will be in short of even drinking water. Also, in the present, there are some areas where sea water or chloride contained sand are used as mixing water with or without intension. The authors believe that the possibilities of using sea water as mixing water in concrete should be investigated seriously. In this paper, the authors would like to show various possibilities of using sea water as mixing water in RC （reinforced concrete） members. The possibilities are shown as follows： （1） mixed with pozzolanic materials （Blast furnace slag powder, etc.） expecting to fix the free chloride ion; （2） Mixed with corrosion inhibitor; （3） reinforced with stainless steel or corrosion resistant reinforcement; and （4） used in very dry or submerged conditions.展开更多
The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the ded...The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the dedicated outdoor air system(DOAS) and indoor thermal comfort can be enhanced by the radiant cooling system(RCS). The optimal air-supply mode of the hybrid system and the corresponding design approach were investigated. A full-scale experimental chamber with various air outlets and the ceiling radiant cooling panels(CRCP) was designed and established. The performances of different air-supply modes along with CRCPs were analyzed by multi-index evaluations. Preliminary investigations were also conducted on the humidity stratification and the control effect of different airflow modes to prevent condensation on CRCP. The overhead supply air is recommended as the best combination mode for the hybrid system after comprehensive comparison of the experiment results. The optimal proportion of CRCP accounting for the total cooling capacities in accord with specific cooling loads is found, which may provide valuable reference for the design and operation of the hybrid system.展开更多
This paper concerns the bond strength of FRP bars in AAC by the concentric pullout test. Specimens were subjected to compare with mild steel bars. The bond performance including the mode of failure and bond strength w...This paper concerns the bond strength of FRP bars in AAC by the concentric pullout test. Specimens were subjected to compare with mild steel bars. The bond performance including the mode of failure and bond strength was investigated with varying embedment length and surface treatment. Regarding the bond performance, embedment depth has influenced on bond strength as well as the sanded surface. Carbon fiber reinforced polymer （CFRP） pronounced the most promising results with the highest bond strength attained.展开更多
文摘In the near future, fresh water will be very difficult to get and scarce. It is said that in 2025 half of the mankind will live in the areas where fresh water is not enough. Also, UN and WMO （World Meteorological Organization） are predicting five billion people will be in short of even drinking water. Also, in the present, there are some areas where sea water or chloride contained sand are used as mixing water with or without intension. The authors believe that the possibilities of using sea water as mixing water in concrete should be investigated seriously. In this paper, the authors would like to show various possibilities of using sea water as mixing water in RC （reinforced concrete） members. The possibilities are shown as follows： （1） mixed with pozzolanic materials （Blast furnace slag powder, etc.） expecting to fix the free chloride ion; （2） Mixed with corrosion inhibitor; （3） reinforced with stainless steel or corrosion resistant reinforcement; and （4） used in very dry or submerged conditions.
基金Project(51178298)supported by the National Natural Science Foundation of China
文摘The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the dedicated outdoor air system(DOAS) and indoor thermal comfort can be enhanced by the radiant cooling system(RCS). The optimal air-supply mode of the hybrid system and the corresponding design approach were investigated. A full-scale experimental chamber with various air outlets and the ceiling radiant cooling panels(CRCP) was designed and established. The performances of different air-supply modes along with CRCPs were analyzed by multi-index evaluations. Preliminary investigations were also conducted on the humidity stratification and the control effect of different airflow modes to prevent condensation on CRCP. The overhead supply air is recommended as the best combination mode for the hybrid system after comprehensive comparison of the experiment results. The optimal proportion of CRCP accounting for the total cooling capacities in accord with specific cooling loads is found, which may provide valuable reference for the design and operation of the hybrid system.
文摘This paper concerns the bond strength of FRP bars in AAC by the concentric pullout test. Specimens were subjected to compare with mild steel bars. The bond performance including the mode of failure and bond strength was investigated with varying embedment length and surface treatment. Regarding the bond performance, embedment depth has influenced on bond strength as well as the sanded surface. Carbon fiber reinforced polymer （CFRP） pronounced the most promising results with the highest bond strength attained.
