高层混凝土建筑抗震结构设计探析

本文中,主要结合高层建筑混凝土抗震结构的设计要求,提出高层混凝土建筑抗震结构设计的优化策略。

Parametric analysis of steel plated shear structures

Due to outstanding ductility and high strength,the steel plate shear wall(SPSW)is recognized as a good lateral system for building structures; particularly as it interacts with earthquake resistant design.This study aims to reveal the dynamic and cyclic behavior of steel plated shear wall.Finite element method of analysis was implemented in order to simulate the behavior of such a wall structure.To determine the dynamic behavior of un-stiffened plate shear wall,two different analytical models were implemented.The post buckling strength of steel plate subjected to lateral loading was also employed.The story shear-drift diagrams of steel shear wall system were presented.The strength and ductility of the system obtained from the analysis were compared with those of steel shear wall tests reported before.The pertinent parameters of the steel shear wall system such as plate thickness,column and beam stiffness and the plate aspect ratio were recognized and their effects were recorded.The effect of stiffeners on the behavior of the SPSW was also investigated.

Discussion on seismic design of high-rise building structure in China

With the rapid development of China＇s economy, the modernization drive and the process of urbanization continue to advance, land for urban construction is becoming more and tenser and land prices are rising steadily, there are more and more high-rise buildings, its density is also increasing. With the increasing number trend of high-rise building development, anti-seismic building requirement as an important part of architectural design is worthy of our exploration and study. Seismic resistance has become an important subject of engineering design. This paper will discuss the technical principle of seismic design in building structure design, so as to optimize the seismic design of high-rise building structure better.

Uniform-risk-targeted seismic design for collapse safety of building structures

Seismic design should quantitatively evaluate and control the risk of earthquake-induced collapse that a building structure may experience during its design service life. This requires taking into consideration both the collapse resistant capacity of the building and the earthquake ground motion demand. The fundamental concept of uniform-risk-targeted seismic design and its relevant assessment process are presented in this paper. The risks of earthquake-induced collapse for buildings located in three seismic regions with the same prescribed seismic fortification intensity but different actual seismic hazards are analyzed to il- lustrate the engineering significance of uniform-risk-targeted seismic design. The results show that with China＇s current seis- mic design method, the risk of earthquake-induced collapse of buildings varies greatly from site to site. Additional research is needed to further develop and implement the uniform-risk-targeted seismic design aoDroach oronnsed in thi~ nnner

An improved ground motion intensity measure for super high-rise buildings

Ground motion intensity measure (IM) is an important part in performance-based seismic design. A reasonable and efficient IM can make the prediction of the structural seismic responses more accurate. Therefore, a more reasonable IM for super high-rise buildings is proposed in this paper. This IM takes into account the significant characteristic that higher-order vibration modes play important roles in the seismic response of super high-rise buildings, as well as the advantages of some existing IMs. The key parameter of the proposed IM is calibrated using a series of time-history analyses. The collapse simulations of two super high-rise buildings are used to discuss the suitability of the proposed IM and some other existing IMs. The results indicate that the proposed IM yields a smaller coefficient of variation for the critical collapse status than other existing IMs and performs well in reflecting the contribution of higher-order vibration modes to the structural response. Hence, the proposed IM is more applicable to seismic design for super high-rise buildings than other IMs.

Property of critical excitation for moment-resisting frames subjected to horizontal and vertical simultaneous ground motions

It has often been reported that, when building structures are subjected to near-fault earthquake ground motions, horizontal and vertical impulsive inputs may cause critical damage during the first few seconds. In practical design of building structures, however, the safety check, taking into account the effect of multi-component ground motions, is hardly conducted except the design of important structures such as high-rise buildings and nuclear power plants. Ftirthel＇more, it is not clear how the correlation of multi-component ground motions influences the actual safety of structures. In this paper, the detailed property of critical excitation is discussed in association with the relationship between the characteristics of ground motions and those of structures. The properties of various auto power spectral density （PSD） functions of the horizontal and vertical ground motions are investigated, and those of the critical cross PSD function of these two-directional ground motions are found by a devised algorithm in a feasible complex plane. A closed-form expression is derived from the critical relation of the auto PSD functions of the simultaneous inputs. This critical excitation method provides us with a new approach for earthquake-resistant design against the possible future earthquake which causes the critical damages to buildings.