A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and ...A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases： the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers＇ definition and Liang et al. ＇s definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.展开更多
Acoupled biharmonic spline and linear interpolation algorithm was proposed to create a three-dimensional smooth deposit model with minimal curvature containing grade and position data. To obtain the optimal technical ...Acoupled biharmonic spline and linear interpolation algorithm was proposed to create a three-dimensional smooth deposit model with minimal curvature containing grade and position data. To obtain the optimal technical parameters, such as cuttingheight and drum diameter, a virtual longwall mining procedure was modelled by simulating the actual fully mechanized longwall mining process. Based on the above work, a bauxite deposit in a longwall mining panel was modelled by scattered grade data from ores sampled on the entry wall. The deposit was then demarcated by industrial indexes and sliced according to the virtual longwallmining procedure. The results show that the proposed interpolation algorithm can depict the stratiform structure of bauxite depositsand that the uncovered bauxite deposit has high proportions of high-grade and rich ore. The ranges of optimal cutting height and drum diameters are 1.72-2.84 m and 1.42-1.72 m, respectively. Finally, an intellectualized longwall mining procedure was designed to guide the mining process with the lowest dilution and loss rates.展开更多
The drum shearer and high pressure water jet combined cutting system is an effective technology to cut hard coal-rock, but one problem of the technology is the choice of pick and nozzle location parameters. In order t...The drum shearer and high pressure water jet combined cutting system is an effective technology to cut hard coal-rock, but one problem of the technology is the choice of pick and nozzle location parameters. In order to solve the problem, the process and mechanism of combined cutting arc studied and mining seepage catastrophe theory is used to construct the mathematic and physical model of combined cutting hard coal-rock. Based on the model and detailed analysis of combined cutting mechanism, the single pick and nozzle combined cutting test-bed is built to test the main pick and nozzle location parameters of drum shearer and water jet combined cutting system. Test results show that the best vertical distance between the pick-tip and nozzle center point is the sum of cutting thickness and proper target distance in the Y axial direction; the best horizontal distance is the length between pick-tip point and coal-rock surface bursting crack point in the X axial direction. The best incident angle of water jet should be the same as the bursting crack line＇s angle in theory, but considering other important factors comprehensively, it is more reasonable when the incident angle of water jet is 90°.展开更多
The coupled vibration characteristics of multiple elastic annular baffles of the same inner radius in a partially liquid-filled rigid cylindrical container were studied. The liquid domain was divided into several simp...The coupled vibration characteristics of multiple elastic annular baffles of the same inner radius in a partially liquid-filled rigid cylindrical container were studied. The liquid domain was divided into several simple sub-domains so that the liquid velocity potential in each liquid sub-domain was of class C 1 with continuous boundary conditions. Based on the superposition principle, the general solution of the liquid velocity potential corresponding to each liquid sub-domain was obtained by means of the method of separation of variables. The coupled modes of the multiple elastic annular baffles were expressed in terms of dry-modal functions. The free surface condition, the interface conditions and coupled vibration conditions were expressed in terms of Fourier series along the liquid height and Bessel series in the radial direction, respectively. Stable and fast numerical computations were investigated by the convergence study. Excellent agreements have been achieved in the comparison of re- suits obtained by the proposed approach with those given by the finite element software ADINA. The natural frequencies and mode shapes versus the position, the inner radius and the number of the annular baffles were thoroughly discussed.展开更多
基金The National Key Technologies R & D Program during the 11th Five-Year Plan Period(No.2006BAD08B01)the Program for New Century Excellent Talents in Universities of Henan Province(No.2005HANCET-13)
文摘A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases： the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers＇ definition and Liang et al. ＇s definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.
基金Project(11472311)supported by the National Natural Science Foundation of ChinaProject(2015CX005)supported by the Innovation Driven Plan of Central South University of ChinaProject(2015zzts083)supported by the Fundamental Research Funds for the Central Universities of Central South University,China
文摘Acoupled biharmonic spline and linear interpolation algorithm was proposed to create a three-dimensional smooth deposit model with minimal curvature containing grade and position data. To obtain the optimal technical parameters, such as cuttingheight and drum diameter, a virtual longwall mining procedure was modelled by simulating the actual fully mechanized longwall mining process. Based on the above work, a bauxite deposit in a longwall mining panel was modelled by scattered grade data from ores sampled on the entry wall. The deposit was then demarcated by industrial indexes and sliced according to the virtual longwallmining procedure. The results show that the proposed interpolation algorithm can depict the stratiform structure of bauxite depositsand that the uncovered bauxite deposit has high proportions of high-grade and rich ore. The ranges of optimal cutting height and drum diameters are 1.72-2.84 m and 1.42-1.72 m, respectively. Finally, an intellectualized longwall mining procedure was designed to guide the mining process with the lowest dilution and loss rates.
基金Project(2012AA062104) supported by the National High Technology Research and Development Program of ChinaProject(201104583) supported by the Postdoctoral Special Funded Projects,China
文摘The drum shearer and high pressure water jet combined cutting system is an effective technology to cut hard coal-rock, but one problem of the technology is the choice of pick and nozzle location parameters. In order to solve the problem, the process and mechanism of combined cutting arc studied and mining seepage catastrophe theory is used to construct the mathematic and physical model of combined cutting hard coal-rock. Based on the model and detailed analysis of combined cutting mechanism, the single pick and nozzle combined cutting test-bed is built to test the main pick and nozzle location parameters of drum shearer and water jet combined cutting system. Test results show that the best vertical distance between the pick-tip and nozzle center point is the sum of cutting thickness and proper target distance in the Y axial direction; the best horizontal distance is the length between pick-tip point and coal-rock surface bursting crack point in the X axial direction. The best incident angle of water jet should be the same as the bursting crack line＇s angle in theory, but considering other important factors comprehensively, it is more reasonable when the incident angle of water jet is 90°.
基金supported by the National Natural Science Foundation of China (Grant No. 11172123)
文摘The coupled vibration characteristics of multiple elastic annular baffles of the same inner radius in a partially liquid-filled rigid cylindrical container were studied. The liquid domain was divided into several simple sub-domains so that the liquid velocity potential in each liquid sub-domain was of class C 1 with continuous boundary conditions. Based on the superposition principle, the general solution of the liquid velocity potential corresponding to each liquid sub-domain was obtained by means of the method of separation of variables. The coupled modes of the multiple elastic annular baffles were expressed in terms of dry-modal functions. The free surface condition, the interface conditions and coupled vibration conditions were expressed in terms of Fourier series along the liquid height and Bessel series in the radial direction, respectively. Stable and fast numerical computations were investigated by the convergence study. Excellent agreements have been achieved in the comparison of re- suits obtained by the proposed approach with those given by the finite element software ADINA. The natural frequencies and mode shapes versus the position, the inner radius and the number of the annular baffles were thoroughly discussed.
