A new configuration of coalescence-dispersed pulsed-sieve-plate extraction column (CDPSEC) was developed, and the mass transfer and axial mixing characteristics were evaluated with the two-point dynamic method.The inf...A new configuration of coalescence-dispersed pulsed-sieve-plate extraction column (CDPSEC) was developed, and the mass transfer and axial mixing characteristics were evaluated with the two-point dynamic method.The influence of operation conditions was discussed with experimental results, showing that the mass transfer performance of CDPSEC mainly depends on the energy input and the holdup of dispersed phase. Higher energy input results in higher holdup of the dispersed phase, the axial mixing of the continuous phase is suppressed, and the true height of mass transfer unit decreases markedly. On the other hand, higher energy input leads to more serious forward mixing of the dispersed phase, so the energy input should be limited. Accordingly the operation conditions were divided into two regions, and empirical correlations for predicting the mass transfer and axial mixing characteristics in different regions with a satisfactory accuracy were suggested.展开更多
A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeo...A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeolite synthesized with a template. Analytical results indicated that they were similar in structure and composition. The influences ofpH value and Si/Al ratio on synthesis were studied. It was found that a high pH value or a low Si/AI ratio could provide better environment for mordenite （MOR） crystallization. The zeolites applied as catalysts in naphtha catalytic cracking for producing ethylene and propylene showed outstanding catalytic performance with the total yield of ethylene and propylene reaching 55 m%. The process could achieve most favorable efficiency when the catalyst contained 5 m% of MOR.展开更多
The synthesis of mesoporous material SBA-15 has been extensively reported in the past decades, which possesses a pore diameter of 6-8 nm on average. Here, a simple post-synthesis procedure has been developed to synthe...The synthesis of mesoporous material SBA-15 has been extensively reported in the past decades, which possesses a pore diameter of 6-8 nm on average. Here, a simple post-synthesis procedure has been developed to synthesize SBA-15 with further expanded pore diameter to above 10 nm simply by a solvothermal treatment replacing traditional hydrothermal step for mesopore template removal, which results in efficient pore expansion and the significantly promoted condensation of silica framework as well. This facile approach is believed applicable for pore expansions of other kinds of mesoporous silica materials.展开更多
文摘A new configuration of coalescence-dispersed pulsed-sieve-plate extraction column (CDPSEC) was developed, and the mass transfer and axial mixing characteristics were evaluated with the two-point dynamic method.The influence of operation conditions was discussed with experimental results, showing that the mass transfer performance of CDPSEC mainly depends on the energy input and the holdup of dispersed phase. Higher energy input results in higher holdup of the dispersed phase, the axial mixing of the continuous phase is suppressed, and the true height of mass transfer unit decreases markedly. On the other hand, higher energy input leads to more serious forward mixing of the dispersed phase, so the energy input should be limited. Accordingly the operation conditions were divided into two regions, and empirical correlations for predicting the mass transfer and axial mixing characteristics in different regions with a satisfactory accuracy were suggested.
基金funded by the National Basic Research Program of China (Project No. 2003CB615804) the joint funding of the National Natural Science Foundation of China and SINOPEC (NO.20736011)
文摘A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeolite synthesized with a template. Analytical results indicated that they were similar in structure and composition. The influences ofpH value and Si/Al ratio on synthesis were studied. It was found that a high pH value or a low Si/AI ratio could provide better environment for mordenite （MOR） crystallization. The zeolites applied as catalysts in naphtha catalytic cracking for producing ethylene and propylene showed outstanding catalytic performance with the total yield of ethylene and propylene reaching 55 m%. The process could achieve most favorable efficiency when the catalyst contained 5 m% of MOR.
基金supported by the National Basic Research Program of China(2012CB933602)the National Natural Science Foundation of China(51172070,51132009,51202068 and51472085)+1 种基金Shu Guang Project(11SG30)the Fundamental Research Funds for the Central Universities
文摘The synthesis of mesoporous material SBA-15 has been extensively reported in the past decades, which possesses a pore diameter of 6-8 nm on average. Here, a simple post-synthesis procedure has been developed to synthesize SBA-15 with further expanded pore diameter to above 10 nm simply by a solvothermal treatment replacing traditional hydrothermal step for mesopore template removal, which results in efficient pore expansion and the significantly promoted condensation of silica framework as well. This facile approach is believed applicable for pore expansions of other kinds of mesoporous silica materials.
