The utilization of prefabricated light modular radiant heating system has demonstrated significant increases in heat transfer efficiency and energy conservation capabilities.Within prefabricated building construction,...The utilization of prefabricated light modular radiant heating system has demonstrated significant increases in heat transfer efficiency and energy conservation capabilities.Within prefabricated building construction,this new heating method presents an opportunity for the development of comprehensive facilities.The parameters for evaluating the effectiveness of such a system are the upper surface layer’s heat flux and temperature.In this paper,thermal resistance analysis calculation based on a simplified model for this unique radiant heating system analysis is presented with the heat transfer mechanism’s evaluation.The results obtained from thermal resistance analysis calculation and numerical simulation indicate that the thermal resistance analysis method is highly accurate with temperature discrepancies ranging from 0.44℃ to−0.44℃ and a heat flux discrepancy of less than 7.54%,which can meet the requirements of practical engineering applications,suggesting a foundation for the prefabricated radiant heating system.展开更多
The authors constructed a simplified model of spring wheat (Triticum aestivum L.) carbon assimilation and dry matter accumulation (DMA) process which consisted of two independent variables, day length (L) and total...The authors constructed a simplified model of spring wheat (Triticum aestivum L.) carbon assimilation and dry matter accumulation (DMA) process which consisted of two independent variables, day length (L) and total daily radiation (TDR). Leaf water potential (Ψ) was incorporated into the simplified growth model based on the assumption that both light use efficiency (α) and CO 2 conductance of assimilation (g c) were depressed by water limitation. Finally,Ψ was estimated from a regression equation in which the independent variables were relative soil water content in the upper 80 cm (θ R,80 ), ambient temperature (T a), vapor pressure deficit (VPD), the cumulative leaf water potential below thresholds of -1.5 MPa (Ψ c,1.5 ). Some applications in research program of field experiment of atmosphere_land surface processes in Heihe River region were tested. The simulated data agreed well with the data observed at Linze oasis in 1989 for various levels of water supply and at Zhangye oasis in 1992 in the field. The analysis and simulation using the model demonstrated that the simplified growth model could describe very well the DMA process of spring wheat with and without water limitation in the region of HEIFE (Heihe field experiment).展开更多
A self-normalized statistic the modified modal scintillation index MMSI is proposed and defined as the variance of the modulus of modal excitation normalized by the square of its expected value over some observation i...A self-normalized statistic the modified modal scintillation index MMSI is proposed and defined as the variance of the modulus of modal excitation normalized by the square of its expected value over some observation intervals.It is proved in an analytical form that the MMSI is a depth dependent signature and independent of the source level and the source range under the condition of the ideal waveguide while the classical modal scintillation index MSI depends on both the source level and the source range.The MSI and the MMSI in the Pekeris waveguide at 70 Hz are simulated with different source levels and source ranges by the Kraken normal mode model.The simulation results are consistent with the theoretical deduction.The MMSI probability density functions PDFs of different normal modes for surface and submerged sources are calculated using the mode filtering methods with the same variations of vertical motions.It is indicated that the PDFs can be used to separate the submerged and the surface sources except for the fourth mode.展开更多
To deduce a new color difference formula based on CIE 1997 Color Appearance Model(CIECAM97s), a color space J a 1 b 1 is first constructed with color appearance descriptors J,a,b in CIECAM97s. The new f...To deduce a new color difference formula based on CIE 1997 Color Appearance Model(CIECAM97s), a color space J a 1 b 1 is first constructed with color appearance descriptors J,a,b in CIECAM97s. The new formula is then deduced in the space and named CDF CIECAM97s. The factors for lightness, chroma and hue correction in the formula are derived by linear regression according to BFD? CP data sets. It is found by statistical analysis that CDF CIECAM97s is in closer accordance with the visual assessments when compared with CMC(1∶1), CIE94 and CIE L *a *b * color difference formulae. Based on color appearance model, the new color difference formula can be used to predict color difference perception in a varity of different viewing conditions.展开更多
In frequent tree pattern mining, the number of frequent subtrees generated is often too large. To tackle this problem, the concept of condensed frequent subtree base is proposed. The base consists of the maximal frequ...In frequent tree pattern mining, the number of frequent subtrees generated is often too large. To tackle this problem, the concept of condensed frequent subtree base is proposed. The base consists of the maximal frequent subtrees for a series of support thresholds. It is a subset of frequent subtrees, and is used to approximate the support of arbitrary frequent subtrees with guaranteed maximal error bound. In addition, an algorithm is developed to mine such a condensed subtree base in a database of labeled rooted ordered trees. The algorithm adopts the way of fight-most extension to generate systematically all frequent rooted ordered subtrees. Several techniques are proposed to prune the branches that do not correspond to the maximal frequent subtrees. Heuristic techniques are used to arrange the order of computation so that relatively expensive computation is avoided as much as possible. Experimental results show that the size of the base is less than 10% of that of the complete set, and the algorithm outperforms the previous algorithms.展开更多
[Objective] The aim was to select simplified high-yielding cultivation technology of rice. [Method] The research explored three methods of farmland prepara- tion, transplanting, and fertilization including shallow rot...[Objective] The aim was to select simplified high-yielding cultivation technology of rice. [Method] The research explored three methods of farmland prepara- tion, transplanting, and fertilization including shallow rotary tillage and deep ploughing, mechanical transplanting and hand transplanting, controlled-release fertilizer and quantitative fertilization in order to investigate effects of different treatment groups on rice characteristics, economic characteristics, as well as labor saving, yield increasing and profit improving. [Result] Rice increased by 596.4-809.55 kg/hm2, labor saving reached 120-135 per hm2, and profit improved in the range from 5 521.39 to 8 727.48 yuan/hm2 in the treatment groups by combinations of shallow rotary tillage, mechanical transplanting, and controlled-release fertilizer, of shallow rotary tillage, mechanical transplanting, and quantitative fertilization, and of deep ploughing, mechanical transplanting, and controlled release fertilizer. [Conclusion] The three models are of promising prospects in production.展开更多
A robust and efficient algorithm is presented to build multiresolution models (MRMs) of arbitrary meshes without requirement of subdivision connectivity. To overcome the sampling difficulty of arbitrary meshes, edge c...A robust and efficient algorithm is presented to build multiresolution models (MRMs) of arbitrary meshes without requirement of subdivision connectivity. To overcome the sampling difficulty of arbitrary meshes, edge contraction and vertex expansion are used as downsampling and upsampling methods. Our MRMs of a mesh are composed of a base mesh and a series of edge split operations, which are organized as a directed graph. Each split operation encodes two parts of information. One is the modification to the mesh, and the other is the dependency relation among splits. Such organization ensures the efficiency and robustness of our MRM algorithm. Examples demonstrate the functionality of our method.展开更多
Although many Chinese scholars have concentrated on Jane Eyre, yet few of them have made research on the other works of Charlotte Bronte. This paper will analyze Jane Eyre, Shirley and Villette in terms of ambiguity o...Although many Chinese scholars have concentrated on Jane Eyre, yet few of them have made research on the other works of Charlotte Bronte. This paper will analyze Jane Eyre, Shirley and Villette in terms of ambiguity of gender, in order to disclose the writing career of Charlotte and the influence that she has placed on the latter women writers.展开更多
In order to improve the computation efficiency and simulation accuracy,a novel simplified simulation method for friction pendulum bearing( FPB) is proposed. The behavior of FPB was analyzed based on the stress charact...In order to improve the computation efficiency and simulation accuracy,a novel simplified simulation method for friction pendulum bearing( FPB) is proposed. The behavior of FPB was analyzed based on the stress characteristics of the slider of FPB. Then,a novel simplified FPB model with a single pendulum and a nonlinear spring was established. The mechanical behavior of the simplified model was analyzed and it conformed well to the basic requirements of FPB. Furthermore,shaking table tests of a concrete slab block structure isolated by four FPBs were carried out, followed by finite element simulations of the test using the proposed simplified model.Three waves and eleven loading scenarios were selected in the test. The results show that the overall trend of the relative displacement time-history curves,the horizontal acceleration time-history curves and the vertical acceleration time-history curves from the numerical simulation match in a good manner with those obtained from the tests. Specifically,it is found that the difference of the peak value within these curves between the simulation and test results is less than 15%,which means that the proposed simplified model can be used to simulate the FPB behaviors under dynamic loadings with acceptable accuracy for engineering purposes.展开更多
In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxia...In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.展开更多
As a combination of bio-mechanism and engineering technology, robot fish has become a multidisci- plinary research that mainly involves both hydrodynamics-based control and actuation technology. This paper presents a ...As a combination of bio-mechanism and engineering technology, robot fish has become a multidisci- plinary research that mainly involves both hydrodynamics-based control and actuation technology. This paper presents a simplified propulsive model for carangiform propulsion, which is a swimming mode suitable for high speed and high efficiency. The carangiform motion is modeled as an N-joint nscillating mechanism that is composed of two basic components: the streamlined fish body represented by a planar spline curve and its hmate caudal tail by an oscillating foil. The speed of fish's straight swimming is adjusted by modulating the joint's oscillating frequency, and its orientation is tuned by different joint's deflection. The results from actual experiment showed that the proposed simplified propulsive model could be a viable eandidate for application in aquatic: swimming vehicles.展开更多
Adaptive Type-2 fuzzy control possesses control performance better than the traditional adaptive fuzzy control.However,heavy computation burden obviously blocks the utilization of adaptive Type-2 fuzzy control in indu...Adaptive Type-2 fuzzy control possesses control performance better than the traditional adaptive fuzzy control.However,heavy computation burden obviously blocks the utilization of adaptive Type-2 fuzzy control in industrial application.By adopting novel piecewise fuzzy sets and center-average type-reduction,a simplified adaptive interval Type-2 fuzzy controller involving less computation is developed for practical industrial application.In the proposed controller,the inputs are divided into several subintervals and then two piecewise fuzzy sets are used for each subinterval.With the manner of piecewise fuzzy sets and a novel fuzzy rules inference engine,only part of fuzzy rules are simultaneously activated in one control loop,which exponentially decreases the computation and makes the controller appropriate in industrial application.The simulation and experimental study,involving the popular magnetic levitation platform,shows the predicted system with theoretical stability and good tracking performance.The analysis indicates that there is far less computation of the proposed controller than the traditional adaptive interval Type-2 fuzzy controller,especially when the number of fuzzy rules and fuzzy sets is large,and the controller still maintains good control performance as the traditional one.展开更多
Aspect-oriented modeling can uncover potential design faults, yet most existing work fails to achieve both separation and composition in a natural and succinct way. This study presents an aspect-oriented modeling and ...Aspect-oriented modeling can uncover potential design faults, yet most existing work fails to achieve both separation and composition in a natural and succinct way. This study presents an aspect-oriented modeling and analysis approach with hierarchical Coloured Petri Nets(HCPN). HCPN has sub-models and well-defined semantics combining a set of submodels. These two characteristics of HCPN are nicely integrated into aspect oriented modeling. Submodels are used to model aspects while the combination mechanism contributes to aspects weaving. Furthermore, the woven aspect oriented HCPN model can be simulated and analyzed by the CPN Tools. A systematic web application case study is conducted. The results show the system original properties are satisfied after weaving aspects and all design flaws are revealed. As such, the approach can support web application design and analysis in an aspect-oriented fashion concisely and effectively.展开更多
Based on the surface energy balance model which is widely used abroad, a temperature and humidity field coupling model of conservatory soil without crop vegetation in full illumination was established. Considering the...Based on the surface energy balance model which is widely used abroad, a temperature and humidity field coupling model of conservatory soil without crop vegetation in full illumination was established. Considering the relatively closed environment in conservatory, weak solar radiation and little surface evaporation of soil, the daily variation of water content in different soil layers may be neglected, then the temperature and humidity field coupling model was simplified to a one-dimensional thermal diffusion model. The simplified model and the temperature and humidity field coupling model adopted the same computational method of soil physical parameters and discrete format of heat diffusion differential equations, and were applied to the continuous simulation of temperature field in conservatory soil without crop vegetation in full illumination. Through the comparison between simulation results and experimental data, the precision of the simplified model was verified. The typical rule of soil heat flux variation in a 24 h cycle was also obtained.展开更多
Based on the construction bridge of Xiamen-Shenzhen high-speed railway(9-32 m simply-supported beam + 6×32 m continuous beam),the pier-beam-track finite element model,where the continuous beam of the ballast trac...Based on the construction bridge of Xiamen-Shenzhen high-speed railway(9-32 m simply-supported beam + 6×32 m continuous beam),the pier-beam-track finite element model,where the continuous beam of the ballast track and simply-supported beam are combined with each other,was established.The laws of the track stress,the pier longitudinal stress and the beam-track relative displacement were analyzed.The results show that reducing the longitudinal resistance can effectively reduce the track stress and the pier stress of the continuous beam,and increase the beam-track relative displacement.Increasing the rigid pier stiffness of continuous beam can reduce the track braking stress,increase the pier longitudinal stress and reduce the beam-track relative displacement,Increasing the rigid pier stiffness of simply-supported beam can reduce the track braking stress,the rigid pier longitudinal stress and the beam-track relative displacement.展开更多
This paper mainly explores the electromagnetic perturbations of black holes in Gauss-Bonnet gravity and calculates the quasinormal modes for the 5-dimensional, 6-dimensional, 7-dimensional, and 8-dimensional black hol...This paper mainly explores the electromagnetic perturbations of black holes in Gauss-Bonnet gravity and calculates the quasinormal modes for the 5-dimensional, 6-dimensional, 7-dimensional, and 8-dimensional black holes. When α increases from zero, the imaginary part of w will increase accordingly till it reaches a maximum value where it starts to decrease. When a reaches zero, the quasinormal modes will approach their Schwarzschild values. If the Gauss-Bonnet coupling parameter α is large enough, the quasinormal modes will be proportional to α and the oscillation frequency will become high consequently . When L is large enough, the minimum value of -Im ω will approach a value too. We calculate that value for different dimensions.展开更多
The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical re...The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up's drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.展开更多
基金Project(NB-2020-JG-07)supported by the Research and Engineering Application of Key Technologies for New Building Industrialization Project of China Northwest Architectural Design and Research Institute Co.,Ltd.Project(2023-CXTD-29)supported by the Key Scientific and Technological Innovation Team of Shaanxi Province,ChinaProject supported by the K.C.Wong Education Foundation。
文摘The utilization of prefabricated light modular radiant heating system has demonstrated significant increases in heat transfer efficiency and energy conservation capabilities.Within prefabricated building construction,this new heating method presents an opportunity for the development of comprehensive facilities.The parameters for evaluating the effectiveness of such a system are the upper surface layer’s heat flux and temperature.In this paper,thermal resistance analysis calculation based on a simplified model for this unique radiant heating system analysis is presented with the heat transfer mechanism’s evaluation.The results obtained from thermal resistance analysis calculation and numerical simulation indicate that the thermal resistance analysis method is highly accurate with temperature discrepancies ranging from 0.44℃ to−0.44℃ and a heat flux discrepancy of less than 7.54%,which can meet the requirements of practical engineering applications,suggesting a foundation for the prefabricated radiant heating system.
文摘The authors constructed a simplified model of spring wheat (Triticum aestivum L.) carbon assimilation and dry matter accumulation (DMA) process which consisted of two independent variables, day length (L) and total daily radiation (TDR). Leaf water potential (Ψ) was incorporated into the simplified growth model based on the assumption that both light use efficiency (α) and CO 2 conductance of assimilation (g c) were depressed by water limitation. Finally,Ψ was estimated from a regression equation in which the independent variables were relative soil water content in the upper 80 cm (θ R,80 ), ambient temperature (T a), vapor pressure deficit (VPD), the cumulative leaf water potential below thresholds of -1.5 MPa (Ψ c,1.5 ). Some applications in research program of field experiment of atmosphere_land surface processes in Heihe River region were tested. The simulated data agreed well with the data observed at Linze oasis in 1989 for various levels of water supply and at Zhangye oasis in 1992 in the field. The analysis and simulation using the model demonstrated that the simplified growth model could describe very well the DMA process of spring wheat with and without water limitation in the region of HEIFE (Heihe field experiment).
基金The National Natural Science Foundation of China(No.11104029)
文摘A self-normalized statistic the modified modal scintillation index MMSI is proposed and defined as the variance of the modulus of modal excitation normalized by the square of its expected value over some observation intervals.It is proved in an analytical form that the MMSI is a depth dependent signature and independent of the source level and the source range under the condition of the ideal waveguide while the classical modal scintillation index MSI depends on both the source level and the source range.The MSI and the MMSI in the Pekeris waveguide at 70 Hz are simulated with different source levels and source ranges by the Kraken normal mode model.The simulation results are consistent with the theoretical deduction.The MMSI probability density functions PDFs of different normal modes for surface and submerged sources are calculated using the mode filtering methods with the same variations of vertical motions.It is indicated that the PDFs can be used to separate the submerged and the surface sources except for the fourth mode.
文摘To deduce a new color difference formula based on CIE 1997 Color Appearance Model(CIECAM97s), a color space J a 1 b 1 is first constructed with color appearance descriptors J,a,b in CIECAM97s. The new formula is then deduced in the space and named CDF CIECAM97s. The factors for lightness, chroma and hue correction in the formula are derived by linear regression according to BFD? CP data sets. It is found by statistical analysis that CDF CIECAM97s is in closer accordance with the visual assessments when compared with CMC(1∶1), CIE94 and CIE L *a *b * color difference formulae. Based on color appearance model, the new color difference formula can be used to predict color difference perception in a varity of different viewing conditions.
文摘In frequent tree pattern mining, the number of frequent subtrees generated is often too large. To tackle this problem, the concept of condensed frequent subtree base is proposed. The base consists of the maximal frequent subtrees for a series of support thresholds. It is a subset of frequent subtrees, and is used to approximate the support of arbitrary frequent subtrees with guaranteed maximal error bound. In addition, an algorithm is developed to mine such a condensed subtree base in a database of labeled rooted ordered trees. The algorithm adopts the way of fight-most extension to generate systematically all frequent rooted ordered subtrees. Several techniques are proposed to prune the branches that do not correspond to the maximal frequent subtrees. Heuristic techniques are used to arrange the order of computation so that relatively expensive computation is avoided as much as possible. Experimental results show that the size of the base is less than 10% of that of the complete set, and the algorithm outperforms the previous algorithms.
文摘[Objective] The aim was to select simplified high-yielding cultivation technology of rice. [Method] The research explored three methods of farmland prepara- tion, transplanting, and fertilization including shallow rotary tillage and deep ploughing, mechanical transplanting and hand transplanting, controlled-release fertilizer and quantitative fertilization in order to investigate effects of different treatment groups on rice characteristics, economic characteristics, as well as labor saving, yield increasing and profit improving. [Result] Rice increased by 596.4-809.55 kg/hm2, labor saving reached 120-135 per hm2, and profit improved in the range from 5 521.39 to 8 727.48 yuan/hm2 in the treatment groups by combinations of shallow rotary tillage, mechanical transplanting, and controlled-release fertilizer, of shallow rotary tillage, mechanical transplanting, and quantitative fertilization, and of deep ploughing, mechanical transplanting, and controlled release fertilizer. [Conclusion] The three models are of promising prospects in production.
文摘A robust and efficient algorithm is presented to build multiresolution models (MRMs) of arbitrary meshes without requirement of subdivision connectivity. To overcome the sampling difficulty of arbitrary meshes, edge contraction and vertex expansion are used as downsampling and upsampling methods. Our MRMs of a mesh are composed of a base mesh and a series of edge split operations, which are organized as a directed graph. Each split operation encodes two parts of information. One is the modification to the mesh, and the other is the dependency relation among splits. Such organization ensures the efficiency and robustness of our MRM algorithm. Examples demonstrate the functionality of our method.
文摘Although many Chinese scholars have concentrated on Jane Eyre, yet few of them have made research on the other works of Charlotte Bronte. This paper will analyze Jane Eyre, Shirley and Villette in terms of ambiguity of gender, in order to disclose the writing career of Charlotte and the influence that she has placed on the latter women writers.
基金The National Natural Science Foundation of China(No.6505000184)the National Key Research and Development Program of China(No.2016YFC0701400)
文摘In order to improve the computation efficiency and simulation accuracy,a novel simplified simulation method for friction pendulum bearing( FPB) is proposed. The behavior of FPB was analyzed based on the stress characteristics of the slider of FPB. Then,a novel simplified FPB model with a single pendulum and a nonlinear spring was established. The mechanical behavior of the simplified model was analyzed and it conformed well to the basic requirements of FPB. Furthermore,shaking table tests of a concrete slab block structure isolated by four FPBs were carried out, followed by finite element simulations of the test using the proposed simplified model.Three waves and eleven loading scenarios were selected in the test. The results show that the overall trend of the relative displacement time-history curves,the horizontal acceleration time-history curves and the vertical acceleration time-history curves from the numerical simulation match in a good manner with those obtained from the tests. Specifically,it is found that the difference of the peak value within these curves between the simulation and test results is less than 15%,which means that the proposed simplified model can be used to simulate the FPB behaviors under dynamic loadings with acceptable accuracy for engineering purposes.
基金The National Key Research and Development Program of China(No.2018YFC0406701)the National Natural Science Foundation of China(No.51778133,51739008)
文摘In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.
文摘As a combination of bio-mechanism and engineering technology, robot fish has become a multidisci- plinary research that mainly involves both hydrodynamics-based control and actuation technology. This paper presents a simplified propulsive model for carangiform propulsion, which is a swimming mode suitable for high speed and high efficiency. The carangiform motion is modeled as an N-joint nscillating mechanism that is composed of two basic components: the streamlined fish body represented by a planar spline curve and its hmate caudal tail by an oscillating foil. The speed of fish's straight swimming is adjusted by modulating the joint's oscillating frequency, and its orientation is tuned by different joint's deflection. The results from actual experiment showed that the proposed simplified propulsive model could be a viable eandidate for application in aquatic: swimming vehicles.
基金Project(51005253) supported by the National Natural Science Foundation of ChinaProject(2012ZX02702006-003) supported by the National Science and Technology Major Program of ChinaProject(JMTZ201101) supported by the Key Laboratory for Precision & Non-traditional Machining of Ministry of Education,Dalian University of Technology,China
文摘Adaptive Type-2 fuzzy control possesses control performance better than the traditional adaptive fuzzy control.However,heavy computation burden obviously blocks the utilization of adaptive Type-2 fuzzy control in industrial application.By adopting novel piecewise fuzzy sets and center-average type-reduction,a simplified adaptive interval Type-2 fuzzy controller involving less computation is developed for practical industrial application.In the proposed controller,the inputs are divided into several subintervals and then two piecewise fuzzy sets are used for each subinterval.With the manner of piecewise fuzzy sets and a novel fuzzy rules inference engine,only part of fuzzy rules are simultaneously activated in one control loop,which exponentially decreases the computation and makes the controller appropriate in industrial application.The simulation and experimental study,involving the popular magnetic levitation platform,shows the predicted system with theoretical stability and good tracking performance.The analysis indicates that there is far less computation of the proposed controller than the traditional adaptive interval Type-2 fuzzy controller,especially when the number of fuzzy rules and fuzzy sets is large,and the controller still maintains good control performance as the traditional one.
基金supported by the NSF of China under grants No. 61173048 and No. 61300041Specialized Research Fund for the Doctoral Program of Higher Education under grant No. 20130074110015+2 种基金the Fundamental Research Funds for the Central Universities under Grant No.WH1314038the Humanities and Social Science Research Planning Fund of the Education Ministry of China under grant No.15YJCZH201the Research Innovation Program of Shanghai Municipal Education Commission under grant No. 14YZ134
文摘Aspect-oriented modeling can uncover potential design faults, yet most existing work fails to achieve both separation and composition in a natural and succinct way. This study presents an aspect-oriented modeling and analysis approach with hierarchical Coloured Petri Nets(HCPN). HCPN has sub-models and well-defined semantics combining a set of submodels. These two characteristics of HCPN are nicely integrated into aspect oriented modeling. Submodels are used to model aspects while the combination mechanism contributes to aspects weaving. Furthermore, the woven aspect oriented HCPN model can be simulated and analyzed by the CPN Tools. A systematic web application case study is conducted. The results show the system original properties are satisfied after weaving aspects and all design flaws are revealed. As such, the approach can support web application design and analysis in an aspect-oriented fashion concisely and effectively.
文摘Based on the surface energy balance model which is widely used abroad, a temperature and humidity field coupling model of conservatory soil without crop vegetation in full illumination was established. Considering the relatively closed environment in conservatory, weak solar radiation and little surface evaporation of soil, the daily variation of water content in different soil layers may be neglected, then the temperature and humidity field coupling model was simplified to a one-dimensional thermal diffusion model. The simplified model and the temperature and humidity field coupling model adopted the same computational method of soil physical parameters and discrete format of heat diffusion differential equations, and were applied to the continuous simulation of temperature field in conservatory soil without crop vegetation in full illumination. Through the comparison between simulation results and experimental data, the precision of the simplified model was verified. The typical rule of soil heat flux variation in a 24 h cycle was also obtained.
基金Project(50678176) supported by the National Natural Science Foundation of China
文摘Based on the construction bridge of Xiamen-Shenzhen high-speed railway(9-32 m simply-supported beam + 6×32 m continuous beam),the pier-beam-track finite element model,where the continuous beam of the ballast track and simply-supported beam are combined with each other,was established.The laws of the track stress,the pier longitudinal stress and the beam-track relative displacement were analyzed.The results show that reducing the longitudinal resistance can effectively reduce the track stress and the pier stress of the continuous beam,and increase the beam-track relative displacement.Increasing the rigid pier stiffness of continuous beam can reduce the track braking stress,increase the pier longitudinal stress and reduce the beam-track relative displacement,Increasing the rigid pier stiffness of simply-supported beam can reduce the track braking stress,the rigid pier longitudinal stress and the beam-track relative displacement.
基金Acknowledgments Thank Ding-Fang Zeng for very useful discussions.
文摘This paper mainly explores the electromagnetic perturbations of black holes in Gauss-Bonnet gravity and calculates the quasinormal modes for the 5-dimensional, 6-dimensional, 7-dimensional, and 8-dimensional black holes. When α increases from zero, the imaginary part of w will increase accordingly till it reaches a maximum value where it starts to decrease. When a reaches zero, the quasinormal modes will approach their Schwarzschild values. If the Gauss-Bonnet coupling parameter α is large enough, the quasinormal modes will be proportional to α and the oscillation frequency will become high consequently . When L is large enough, the minimum value of -Im ω will approach a value too. We calculate that value for different dimensions.
文摘The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up's drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.