A model of non-uniform height rectangular fin, in which the variation of base's thickness and width are taken into account, is established in this paper. The dimensionless maximum thermal resistance(DMTR) and the ...A model of non-uniform height rectangular fin, in which the variation of base's thickness and width are taken into account, is established in this paper. The dimensionless maximum thermal resistance(DMTR) and the dimensionless equivalent thermal resistance(DETR) defined based on the entransy dissipation rate(EDR) are taken as performance evaluation indexes. According to constructal theory, the variations of the two indexes with the geometric parameters of the fin are analyzed by using a finite-volume computational fluid dynamics code, the effects of the fin-material fraction on the two indexes are analyzed. It is found that the two indexes decrease monotonically as the ratio between the front height and the back height of the fin increases subjected to the non-uniform height rectangular fin. When the model is reduced to the uniform height fin, the two indexes increase first and then decrease with increase in the ratio between the height of the fin and the fin space. The fin-material fraction has no effect on the change rule of the two indexes with the ratio between the height of the fin and the fin space. The sensitivity of the DETR to the geometric parameters of the fin is higher than that of the DMTR to the geometric parameters. The results obtained herein can provide some theoretical support for the thermal design of rectangular fins.展开更多
The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of s...The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 51579244, 51506220 and 51356001)
文摘A model of non-uniform height rectangular fin, in which the variation of base's thickness and width are taken into account, is established in this paper. The dimensionless maximum thermal resistance(DMTR) and the dimensionless equivalent thermal resistance(DETR) defined based on the entransy dissipation rate(EDR) are taken as performance evaluation indexes. According to constructal theory, the variations of the two indexes with the geometric parameters of the fin are analyzed by using a finite-volume computational fluid dynamics code, the effects of the fin-material fraction on the two indexes are analyzed. It is found that the two indexes decrease monotonically as the ratio between the front height and the back height of the fin increases subjected to the non-uniform height rectangular fin. When the model is reduced to the uniform height fin, the two indexes increase first and then decrease with increase in the ratio between the height of the fin and the fin space. The fin-material fraction has no effect on the change rule of the two indexes with the ratio between the height of the fin and the fin space. The sensitivity of the DETR to the geometric parameters of the fin is higher than that of the DMTR to the geometric parameters. The results obtained herein can provide some theoretical support for the thermal design of rectangular fins.
基金supported by the National Natural Science Foundation of China (No. 50748033)the Specific Foundation for PhD of Hefei University of Technology (No. 2007GDBJ044), China
文摘The method of nonlinear finite element reliability analysis (FERA) of slope stability using the technique of slip surface stress analysis (SSA) is studied. The limit state function that can consider the direction of slip surface is given, and the formula-tions of FERA based on incremental tangent stiffness method and modified Aitken accelerating algorithm are developed. The limited step length iteration method (LSLIM) is adopted to calculate the reliability index. The nonlinear FERA code using the SSA technique is developed and the main flow chart is illustrated. Numerical examples are used to demonstrate the efficiency and robustness of this method. It is found that the accelerating convergence algorithm proposed in this study proves to be very efficient for it can reduce the iteration number greatly, and LSLIM is also efficient for it can assure the convergence of the iteration of the reliability index.
