AIM To evaluate the advantages of endoscopic ultrasound(EUS) in the assessment of detailed structures of pancreatic cystic neoplasms(PCNs) compared to computed tomography(CT) and magnetic resonance imaging(MRI).METHOD...AIM To evaluate the advantages of endoscopic ultrasound(EUS) in the assessment of detailed structures of pancreatic cystic neoplasms(PCNs) compared to computed tomography(CT) and magnetic resonance imaging(MRI).METHODS All patients with indeterminate PCNs underwent CT, MRI, and EUS. The detailed information, including size, number, the presence of a papilla/nodule, the presence of a septum, and the morphology of the pancreatic duct of PCNs were compared among the three imaging modalities. The size of each PCN was determined using the largest diameter measured. A cyst consisting of several small cysts was referred to as a motherdaughter cyst. Disagreement among the three imaging modalities regarding the total number of mother cysts resulted in the assumption that the correct number was the one in which the majority of imaging modalities indicated.RESULTS A total of 52 females and 16 males were evaluated. The median size of the cysts was 42.5 mm by EUS, 42.0 mm by CT and 38.0 mm by MRI; there was no significant difference in size as assessed among the three imaging techniques. The diagnostic sensitivity and ability of EUS to classify PCNs were 98.5%(67/68) and 92.6%(63/68), respectively. These percentages were higher than those of CT(73.1%, P < 0.001; 17.1%, P < 0.001) and MRI(81.3%, P = 0.001; 20.3%, P < 0.001). EUS was also able to better assess the number of daughter cysts in mother cysts than CT(P = 0.003); however, there was no significant difference between EUS and MRI in assessing mother-daughter cysts(P = 0.254). The papilla/nodule detection rate by EUS was 35.3%(24/68), much higher than those by CT(5.8%, 3/52) and MRI(6.3%, 4/64). The detection rate of the septum by EUS was 60.3%(41/68), which was higher than those by CT(34.6%, 18/52) and by MRI(46.9%, 30/64); the difference between EUS and CT was significant(P = 0.02). The rate of visualizing the pancreatic duct using EUS was 100%, whereas using CT and MRI it was less than 10%.CONCLUSION EUS helps visualize the detailed structures of PCNs and has many advantages over CT and MRI. EUS is valuable in the diagnosis and assessment of PCNs.展开更多
An Efficient and flexible implementation of block ciphers is critical to achieve information security processing.Existing implementation methods such as GPP,FPGA and cryptographic application-specific ASIC provide the...An Efficient and flexible implementation of block ciphers is critical to achieve information security processing.Existing implementation methods such as GPP,FPGA and cryptographic application-specific ASIC provide the broad range of support.However,these methods could not achieve a good tradeoff between high-speed processing and flexibility.In this paper,we present a reconfigurable VLIW processor architecture targeted at block cipher processing,analyze basic operations and storage characteristics,and propose the multi-cluster register-file structure for block ciphers.As for the same operation element of block ciphers,we adopt reconfigurable technology for multiple cryptographic processing units and interconnection scheme.The proposed processor not only flexibly accomplishes the combination of multiple basic cryptographic operations,but also realizes dynamic configuration for cryptographic processing units.It has been implemented with0.18μm CMOS technology,the test results show that the frequency can reach 350 MHz.and power consumption is 420 mw.Ten kinds of block and hash ciphers were realized in the processor.The encryption throughput of AES,DES,IDEA,and SHA-1 algorithm is1554 Mbps,448Mbps,785 Mbps,and 424 Mbps respectively,the test result shows that our processor's encryption performance is significantly higher than other designs.展开更多
A more recent branch of natural computing is DNA computing. At the theoretical level, DNA computing is powerful. This is due to the fact that DNA structure and processing suggest a series of new data structures and op...A more recent branch of natural computing is DNA computing. At the theoretical level, DNA computing is powerful. This is due to the fact that DNA structure and processing suggest a series of new data structures and operations, and to the fact of the massive parallelism. The insertion-deletion system （insdel system） is a DNA computing model based on two genetic operations： insertion and deletion which, working together, are very powerful, leading to characterizations of recursively enumerable lan- guages. When designing an insdel computer, it is natural to try to keep the underlying model as simple as possible. One idea is to use either only insertion operations or only deletion operations. By helping with a weak coding and a morphism, the family INS4^7DEL0^0 is equal to the family of recursively enumerable languages. It is an open problem proposed by Martin-Vide et al. on whether or not the parameters 4 and 7 appearing here can be replaced by smaller numbers. In this paper, our positive answer to this question is that INS2^4DEL0^0 can also play the same role as insertion and deletion. We suppose that the INS2^4DEL0^0 may be the least only-insertion insdel system in this situation. We will give some reasons supporting this conjecture in our paper.展开更多
Applications can only reach 8 %~15 % of utilization on modern computer systems. There are many obstacles to improving system efficiency. The key root is the conflict between the fixed general computer architecture and...Applications can only reach 8 %~15 % of utilization on modern computer systems. There are many obstacles to improving system efficiency. The key root is the conflict between the fixed general computer architecture and the variable requirements of applications. Proactive reconfigurable computing architecture(PRCA) is proposed to improve computing efficiency. PRCA dynamically constructs an efficient computing architecture for a specific application via reconfigurable technology by perceiving requirements,workload and utilization of computing resources. Proactive decision support system(PDSS),hybrid reconfigurable computing array(HRCA) and reconfigurable interconnect(RIC) are intensively researched as the key technologies. The principles of PRCA have been verified with four applications on a test bed. It is shown that PRCA is feasible and highly efficient.展开更多
In this paper, combining the technologies of Computer Supported Cooperative Work （CSCW）, Workflow and Network, the authors aim to organize virtual distributed cooperative work environment （VDCWE） and expound the r...In this paper, combining the technologies of Computer Supported Cooperative Work （CSCW）, Workflow and Network, the authors aim to organize virtual distributed cooperative work environment （VDCWE） and expound the running mechanism of cooperative workflow and design its algorithm for monitoring of urban subway construction. And then a prototype system was built based on the above,capable of supporting user analyzing, dealing with and managing data of monitoring, and real-timely releasing corresponding information, providing interactive virtual and distributed coordination meet-environment, dynami-cally and transparently, in favor of clients＇ interoperaiility and solving practicing problems, and so on.展开更多
In this research article, we analyze the multimedia data mining and classification algorithm based on database optimization techniques. Of high performance application requirements of various kinds are springing up co...In this research article, we analyze the multimedia data mining and classification algorithm based on database optimization techniques. Of high performance application requirements of various kinds are springing up constantly makes parallel computer system structure is valued by more and more common but the corresponding software system development lags far behind the development of the hardware system, it is more obvious in the field of database technology application. Multimedia mining is different from the low level of computer multimedia processing technology and the former focuses on the extracted from huge multimedia collection mode which focused on specific features of understanding or extraction from a single multimedia objects. Our research provides new paradigm for the methodology which will be meaningful and necessary.展开更多
The paper presents the principles of a method, which in two simple stages makes possible to carry out the statically calculation of values of forces acting in the fiat static indeterminate trusses. In each stage, it i...The paper presents the principles of a method, which in two simple stages makes possible to carry out the statically calculation of values of forces acting in the fiat static indeterminate trusses. In each stage, it is considered the static determinate truss, scheme of which is obtained after remove the suitable number of members from the basic static indeterminate truss. The both intermediate statically determinate trusses are of the same clear span and they are loaded by forces of half values applied to the corresponding truss nodes. The method applies one of the typical procedures of calculation of the statically determinate trusses and then it is applied in an appropriate way the rule of superposition for obtaining the final values of forces acting in particular members of the basic truss. The values of forces calculated in this way are of a very close approximation to the force values determined in the special and complex ways being considered as the exact calculation methods. The proposed method can be useful mostly but not only for the initial structural design of such systems. The simplicity of the two-stage method justifies an assumption that it can be relatively easy and worthy to adjust to the requirements of the computer aided technology of statically calculation of the complex forms of trusses.展开更多
The computer aided engineering(CAE) analysis technique has become one of the most important means in modern automobile development due to its remarkably computing capability.With the development of CAE bussiness softw...The computer aided engineering(CAE) analysis technique has become one of the most important means in modern automobile development due to its remarkably computing capability.With the development of CAE bussiness software and intensive research on automotive development process,the CAE technique,which was only used as an auxiliary validation tool in the later product development in the past,is gradually used in each stage of product development now.Furthermore,accurate and fast analysis data can be supplied effectively.Especially in current CAE application, based on some optimization technologies such as sensitivity,feature and topology,the parametric design gradually enables a CAE engineer to be free from the condition which a convention analysis usually lags behind a design,and makes it be parallel to or even anterior to the design.Under the circumstance,the CAE resources can be maximized in each project development department,thereby promoting the project progress and quality,and creating a new philosophy of 'analysis-driven design'.展开更多
Normization, i.e., the system of norms is a structure that defines the group of elements containing the norm values for the requirements of a certain resource. Resources comprise of materials, machines and labor. All ...Normization, i.e., the system of norms is a structure that defines the group of elements containing the norm values for the requirements of a certain resource. Resources comprise of materials, machines and labor. All the requirements of the measure units of the resources are given statically and with the discrete data. Thus, every slight change in the expense list item reference causes a change in norm and our norm is not flexible and features a discrepancy with the real life situations. In order to achieve a higher level of preciseness and to speed up the technological processes of planning and norming the engines of a company that lead to the regulation of the system, the discrete elements of the working （time-related） norms should be replaced by the dynamic ones. This is made possible through setting up norms models that in turn can be presented by formulae in the vectoral system. The use and implementation of the new technologies in terms of production, computer science and cybernetics provides for upgrading the norm requirements. New working tasks in turn require a new norm standardization, which can be applied to the hydrodemolition of concrete constructions by means of water robots that use high pressure water jets.展开更多
Y2000-62091-470 0011984应用非一致存储器划分的低功率分布式算术结构=Low-power distributed arithmetic architectures using non-uniform memory partitionjng[会,英]/Ramprasad,S.&Shanbhag,N.R.//1999 IEEE International Sym...Y2000-62091-470 0011984应用非一致存储器划分的低功率分布式算术结构=Low-power distributed arithmetic architectures using non-uniform memory partitionjng[会,英]/Ramprasad,S.&Shanbhag,N.R.//1999 IEEE International Symposiumon Circuits and Systerns,Vol.3 of 6:Analog and展开更多
Patients suffering from zygomatic complex fractures always present facial deformity and dyslunctions, and thereafter develop psychological and physiological problems. It is really hard to get an ideal prog- nosis for ...Patients suffering from zygomatic complex fractures always present facial deformity and dyslunctions, and thereafter develop psychological and physiological problems. It is really hard to get an ideal prog- nosis for the zygomatic complex fractures because of the complicated anatomical structures. Computer- assisted surgery techniques, as the new emerging auxiliary methods, can optimize the surgical protocol, predict operation outcomes, and improve the accuracy and quality of the operation. Meanwhile the postoperative complications can be reduced effectively. This review aims to provide a comprehensive overview of the application of computer-assisted surgery techniques in the management of zygomatic complex fractures.展开更多
基金Supported by Scientific Research Fund of Army of China,No.14BJZ01
文摘AIM To evaluate the advantages of endoscopic ultrasound(EUS) in the assessment of detailed structures of pancreatic cystic neoplasms(PCNs) compared to computed tomography(CT) and magnetic resonance imaging(MRI).METHODS All patients with indeterminate PCNs underwent CT, MRI, and EUS. The detailed information, including size, number, the presence of a papilla/nodule, the presence of a septum, and the morphology of the pancreatic duct of PCNs were compared among the three imaging modalities. The size of each PCN was determined using the largest diameter measured. A cyst consisting of several small cysts was referred to as a motherdaughter cyst. Disagreement among the three imaging modalities regarding the total number of mother cysts resulted in the assumption that the correct number was the one in which the majority of imaging modalities indicated.RESULTS A total of 52 females and 16 males were evaluated. The median size of the cysts was 42.5 mm by EUS, 42.0 mm by CT and 38.0 mm by MRI; there was no significant difference in size as assessed among the three imaging techniques. The diagnostic sensitivity and ability of EUS to classify PCNs were 98.5%(67/68) and 92.6%(63/68), respectively. These percentages were higher than those of CT(73.1%, P < 0.001; 17.1%, P < 0.001) and MRI(81.3%, P = 0.001; 20.3%, P < 0.001). EUS was also able to better assess the number of daughter cysts in mother cysts than CT(P = 0.003); however, there was no significant difference between EUS and MRI in assessing mother-daughter cysts(P = 0.254). The papilla/nodule detection rate by EUS was 35.3%(24/68), much higher than those by CT(5.8%, 3/52) and MRI(6.3%, 4/64). The detection rate of the septum by EUS was 60.3%(41/68), which was higher than those by CT(34.6%, 18/52) and by MRI(46.9%, 30/64); the difference between EUS and CT was significant(P = 0.02). The rate of visualizing the pancreatic duct using EUS was 100%, whereas using CT and MRI it was less than 10%.CONCLUSION EUS helps visualize the detailed structures of PCNs and has many advantages over CT and MRI. EUS is valuable in the diagnosis and assessment of PCNs.
基金supported by National Natural Science Foundation of China with granted No.61404175
文摘An Efficient and flexible implementation of block ciphers is critical to achieve information security processing.Existing implementation methods such as GPP,FPGA and cryptographic application-specific ASIC provide the broad range of support.However,these methods could not achieve a good tradeoff between high-speed processing and flexibility.In this paper,we present a reconfigurable VLIW processor architecture targeted at block cipher processing,analyze basic operations and storage characteristics,and propose the multi-cluster register-file structure for block ciphers.As for the same operation element of block ciphers,we adopt reconfigurable technology for multiple cryptographic processing units and interconnection scheme.The proposed processor not only flexibly accomplishes the combination of multiple basic cryptographic operations,but also realizes dynamic configuration for cryptographic processing units.It has been implemented with0.18μm CMOS technology,the test results show that the frequency can reach 350 MHz.and power consumption is 420 mw.Ten kinds of block and hash ciphers were realized in the processor.The encryption throughput of AES,DES,IDEA,and SHA-1 algorithm is1554 Mbps,448Mbps,785 Mbps,and 424 Mbps respectively,the test result shows that our processor's encryption performance is significantly higher than other designs.
文摘A more recent branch of natural computing is DNA computing. At the theoretical level, DNA computing is powerful. This is due to the fact that DNA structure and processing suggest a series of new data structures and operations, and to the fact of the massive parallelism. The insertion-deletion system （insdel system） is a DNA computing model based on two genetic operations： insertion and deletion which, working together, are very powerful, leading to characterizations of recursively enumerable lan- guages. When designing an insdel computer, it is natural to try to keep the underlying model as simple as possible. One idea is to use either only insertion operations or only deletion operations. By helping with a weak coding and a morphism, the family INS4^7DEL0^0 is equal to the family of recursively enumerable languages. It is an open problem proposed by Martin-Vide et al. on whether or not the parameters 4 and 7 appearing here can be replaced by smaller numbers. In this paper, our positive answer to this question is that INS2^4DEL0^0 can also play the same role as insertion and deletion. We suppose that the INS2^4DEL0^0 may be the least only-insertion insdel system in this situation. We will give some reasons supporting this conjecture in our paper.
文摘Applications can only reach 8 %~15 % of utilization on modern computer systems. There are many obstacles to improving system efficiency. The key root is the conflict between the fixed general computer architecture and the variable requirements of applications. Proactive reconfigurable computing architecture(PRCA) is proposed to improve computing efficiency. PRCA dynamically constructs an efficient computing architecture for a specific application via reconfigurable technology by perceiving requirements,workload and utilization of computing resources. Proactive decision support system(PDSS),hybrid reconfigurable computing array(HRCA) and reconfigurable interconnect(RIC) are intensively researched as the key technologies. The principles of PRCA have been verified with four applications on a test bed. It is shown that PRCA is feasible and highly efficient.
基金Supported by the Innovative Project Foundation of Beijing Urban Construction Group Co.Ltd (No.2001129)the Award of Beijing Investigation & Design Institute for Urban Construction (No.2004207)
文摘In this paper, combining the technologies of Computer Supported Cooperative Work （CSCW）, Workflow and Network, the authors aim to organize virtual distributed cooperative work environment （VDCWE） and expound the running mechanism of cooperative workflow and design its algorithm for monitoring of urban subway construction. And then a prototype system was built based on the above,capable of supporting user analyzing, dealing with and managing data of monitoring, and real-timely releasing corresponding information, providing interactive virtual and distributed coordination meet-environment, dynami-cally and transparently, in favor of clients＇ interoperaiility and solving practicing problems, and so on.
文摘In this research article, we analyze the multimedia data mining and classification algorithm based on database optimization techniques. Of high performance application requirements of various kinds are springing up constantly makes parallel computer system structure is valued by more and more common but the corresponding software system development lags far behind the development of the hardware system, it is more obvious in the field of database technology application. Multimedia mining is different from the low level of computer multimedia processing technology and the former focuses on the extracted from huge multimedia collection mode which focused on specific features of understanding or extraction from a single multimedia objects. Our research provides new paradigm for the methodology which will be meaningful and necessary.
文摘The paper presents the principles of a method, which in two simple stages makes possible to carry out the statically calculation of values of forces acting in the fiat static indeterminate trusses. In each stage, it is considered the static determinate truss, scheme of which is obtained after remove the suitable number of members from the basic static indeterminate truss. The both intermediate statically determinate trusses are of the same clear span and they are loaded by forces of half values applied to the corresponding truss nodes. The method applies one of the typical procedures of calculation of the statically determinate trusses and then it is applied in an appropriate way the rule of superposition for obtaining the final values of forces acting in particular members of the basic truss. The values of forces calculated in this way are of a very close approximation to the force values determined in the special and complex ways being considered as the exact calculation methods. The proposed method can be useful mostly but not only for the initial structural design of such systems. The simplicity of the two-stage method justifies an assumption that it can be relatively easy and worthy to adjust to the requirements of the computer aided technology of statically calculation of the complex forms of trusses.
文摘The computer aided engineering(CAE) analysis technique has become one of the most important means in modern automobile development due to its remarkably computing capability.With the development of CAE bussiness software and intensive research on automotive development process,the CAE technique,which was only used as an auxiliary validation tool in the later product development in the past,is gradually used in each stage of product development now.Furthermore,accurate and fast analysis data can be supplied effectively.Especially in current CAE application, based on some optimization technologies such as sensitivity,feature and topology,the parametric design gradually enables a CAE engineer to be free from the condition which a convention analysis usually lags behind a design,and makes it be parallel to or even anterior to the design.Under the circumstance,the CAE resources can be maximized in each project development department,thereby promoting the project progress and quality,and creating a new philosophy of 'analysis-driven design'.
文摘Normization, i.e., the system of norms is a structure that defines the group of elements containing the norm values for the requirements of a certain resource. Resources comprise of materials, machines and labor. All the requirements of the measure units of the resources are given statically and with the discrete data. Thus, every slight change in the expense list item reference causes a change in norm and our norm is not flexible and features a discrepancy with the real life situations. In order to achieve a higher level of preciseness and to speed up the technological processes of planning and norming the engines of a company that lead to the regulation of the system, the discrete elements of the working （time-related） norms should be replaced by the dynamic ones. This is made possible through setting up norms models that in turn can be presented by formulae in the vectoral system. The use and implementation of the new technologies in terms of production, computer science and cybernetics provides for upgrading the norm requirements. New working tasks in turn require a new norm standardization, which can be applied to the hydrodemolition of concrete constructions by means of water robots that use high pressure water jets.
文摘Y2000-62091-470 0011984应用非一致存储器划分的低功率分布式算术结构=Low-power distributed arithmetic architectures using non-uniform memory partitionjng[会,英]/Ramprasad,S.&Shanbhag,N.R.//1999 IEEE International Symposiumon Circuits and Systerns,Vol.3 of 6:Analog and
文摘Patients suffering from zygomatic complex fractures always present facial deformity and dyslunctions, and thereafter develop psychological and physiological problems. It is really hard to get an ideal prog- nosis for the zygomatic complex fractures because of the complicated anatomical structures. Computer- assisted surgery techniques, as the new emerging auxiliary methods, can optimize the surgical protocol, predict operation outcomes, and improve the accuracy and quality of the operation. Meanwhile the postoperative complications can be reduced effectively. This review aims to provide a comprehensive overview of the application of computer-assisted surgery techniques in the management of zygomatic complex fractures.
