The structural stability, electronic structures, elastic properties and thermodynamic properties of the main binary phases Mg_（17）Al_（12）, Al_2Ca, Mg_2 Sn and Mg_2 Ca in Mg-Al-Ca-Sn alloy were determined from the ...The structural stability, electronic structures, elastic properties and thermodynamic properties of the main binary phases Mg_（17）Al_（12）, Al_2Ca, Mg_2 Sn and Mg_2 Ca in Mg-Al-Ca-Sn alloy were determined from the first-principles calculation. The calculated lattice parameters are in good agreement with the experimental and literature values. The calculated heats of formation and cohesive energies show that Al_2Ca has the strongest alloying ability and structural stability. The densities of states（DOS）, Mulliken electron occupation number, metallicity and charge density difference of these compounds are given. The elastic constants of Mg_（17）Al_（12）, Al_2Ca, Mg_2 Sn and Mg_2 Ca phases are calculated, and the bulk moduli, shear moduli, elastic moduli and Poisson ratio are derived. The calculations of thermodynamic properties show that the Gibbs free energies of Al_2Ca and Mg_2 Sn are lower than that of Mg_（17）Al_（12）, which indicates that Al_2Ca and Mg_2 Sn are more stable than Mg_（17）Al_（12） phase. Hence, the heat resistance of Mg-Al-based alloys can be improved by adding Ca and Sn additions.展开更多
The electronic structures and mechanical properties of Al4Sr, Mg2Sr and Mg23Sr6 phases were determined by the use of first-principles calculations. The calculated heat of formation and cohesive energy indicate that Al...The electronic structures and mechanical properties of Al4Sr, Mg2Sr and Mg23Sr6 phases were determined by the use of first-principles calculations. The calculated heat of formation and cohesive energy indicate that Al4Sr has the strongest alloying ability as well as the highest structural stability. The elastic parameters were calculated, and then the bulk modulus, shear modulus, elastic modulus and Poisson ratio were derived. The ductility and plasticity were discussed. The results show that Al4Sr and Mg2Sr phases both are ductile, on the contrary, Mg23Sr6 is brittle, and among the three phases, Mg2Sr is a phase with the best plasticity.展开更多
The low-Reynolds-number full developed turbulent flow in channels is simulated using large eddy simulation（LES）method with the preconditioned algorithm and the dynamic subgrid-scale model,with a given disturbance in...The low-Reynolds-number full developed turbulent flow in channels is simulated using large eddy simulation（LES）method with the preconditioned algorithm and the dynamic subgrid-scale model,with a given disturbance in inlet boundary,after a short development section.The inlet Reynolds number based on momentum thickness is 670.The computed results show good agreement with direct numerical simulation（DNS）,which include root mean square fluctuated velocity distribution and average velocity distribution.It is also found that the staggered phenomenon of the coherent structures is caused by sub-harmonic.The results clearly show the formation and evolution of horseshoe vortex in the turbulent boundary layer,including horseshoe vortex structure with a pair of streamwise vortexes and one-side leg of horseshoe vortex.Based on the results,the development of the horseshoe-shaped coherent structures is analyzed in turbulent boundary layer.展开更多
The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-so...The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-soft pseudo-potential technology based on density function theory. The calculated results reveal that due to the electron doping,the Fermi level moves into the conduction bands for SrTi1-xSbxO3 with x = 0. 125 and the system shows metallic behavior. In addition, the DOS moves towards low energy and the optical band gap is broadened. The wide band gap and the low density of the states in the conduction band result in the transparency of the films.展开更多
基金Project(20131083) supported by the Doctoral Starting up Foundation of Liaoning Province,ClhinaProject(LT201304) supported by the Program for Liaoning Innovative Research Team in University,ChinaProject(2013201018) supported by the Key Technologies Research and Development Program of Liaoning Province,China
文摘The structural stability, electronic structures, elastic properties and thermodynamic properties of the main binary phases Mg_（17）Al_（12）, Al_2Ca, Mg_2 Sn and Mg_2 Ca in Mg-Al-Ca-Sn alloy were determined from the first-principles calculation. The calculated lattice parameters are in good agreement with the experimental and literature values. The calculated heats of formation and cohesive energies show that Al_2Ca has the strongest alloying ability and structural stability. The densities of states（DOS）, Mulliken electron occupation number, metallicity and charge density difference of these compounds are given. The elastic constants of Mg_（17）Al_（12）, Al_2Ca, Mg_2 Sn and Mg_2 Ca phases are calculated, and the bulk moduli, shear moduli, elastic moduli and Poisson ratio are derived. The calculations of thermodynamic properties show that the Gibbs free energies of Al_2Ca and Mg_2 Sn are lower than that of Mg_（17）Al_（12）, which indicates that Al_2Ca and Mg_2 Sn are more stable than Mg_（17）Al_（12） phase. Hence, the heat resistance of Mg-Al-based alloys can be improved by adding Ca and Sn additions.
基金Project (200805321032) supported by Doctoral Fund of Ministry of Education of ChinaProject (51071065) supported by the National Natural Science Foundation of ChinaProject (71075003) supported by the Science Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, China
文摘The electronic structures and mechanical properties of Al4Sr, Mg2Sr and Mg23Sr6 phases were determined by the use of first-principles calculations. The calculated heat of formation and cohesive energy indicate that Al4Sr has the strongest alloying ability as well as the highest structural stability. The elastic parameters were calculated, and then the bulk modulus, shear modulus, elastic modulus and Poisson ratio were derived. The ductility and plasticity were discussed. The results show that Al4Sr and Mg2Sr phases both are ductile, on the contrary, Mg23Sr6 is brittle, and among the three phases, Mg2Sr is a phase with the best plasticity.
基金Supported by the National Natural Science Foundation of China(10772082)~~
文摘The low-Reynolds-number full developed turbulent flow in channels is simulated using large eddy simulation（LES）method with the preconditioned algorithm and the dynamic subgrid-scale model,with a given disturbance in inlet boundary,after a short development section.The inlet Reynolds number based on momentum thickness is 670.The computed results show good agreement with direct numerical simulation（DNS）,which include root mean square fluctuated velocity distribution and average velocity distribution.It is also found that the staggered phenomenon of the coherent structures is caused by sub-harmonic.The results clearly show the formation and evolution of horseshoe vortex in the turbulent boundary layer,including horseshoe vortex structure with a pair of streamwise vortexes and one-side leg of horseshoe vortex.Based on the results,the development of the horseshoe-shaped coherent structures is analyzed in turbulent boundary layer.
文摘The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-soft pseudo-potential technology based on density function theory. The calculated results reveal that due to the electron doping,the Fermi level moves into the conduction bands for SrTi1-xSbxO3 with x = 0. 125 and the system shows metallic behavior. In addition, the DOS moves towards low energy and the optical band gap is broadened. The wide band gap and the low density of the states in the conduction band result in the transparency of the films.
