Effective thermal performance of oscillating heat pipe(OHP)is driven by inside pressure distribution.Heat transfer phenomena were reported in terms of pressure and frequency of pressure fluctuation in multi loop OHP c...Effective thermal performance of oscillating heat pipe(OHP)is driven by inside pressure distribution.Heat transfer phenomena were reported in terms of pressure and frequency of pressure fluctuation in multi loop OHP charged with aqueous Al2O3 and MWCNTs/Al2O3 nanoparticles.The influences on thermal resistance of aqueous Al2O3,MWCNTs as well as the hybrid of them in OHP having 3 mm in inner diameter were investigated at 60% filling ratio.Experimental results show that thermal characteristics are significantly inter-related with pressure distribution and strongly depend upon the number of pressure fluctuations with time.Frequency of pressure depends upon the power input in evaporative section.A little inclusion of MWCNTs into aqueous Al2O3 at 60% filling ratio achieves the highest fluctuation frequency and the lowest thermal resistance at any evaporator power input though different nanofluids cause different thermal performances of OHPs.展开更多
This paper deals with utilization possibility of a kinematical couple of screw-matrix in minimachine mechatronic concept which is assigned to move within the pipes having less than 25 mm of the inner diameter. The pri...This paper deals with utilization possibility of a kinematical couple of screw-matrix in minimachine mechatronic concept which is assigned to move within the pipes having less than 25 mm of the inner diameter. The principle of the movement for a straightforward motion consists in transformation of the actuator rotary movement through a screw and a nut to the linear motion. It causes a change of distance between the front and rear parts of the minimachine modules. Due to minimization of the dimensions, the electrical control and power supply components are placed outside of the minimachine operating area. The control module is based on a programmable integrated circuit （PIC）.展开更多
In this paper,a photoelectric device is introduced,which is used in detecting the quality on internal surface of thin and long steel pipe.In this device,the CCTV lens is used for extract tile flaw information on inter...In this paper,a photoelectric device is introduced,which is used in detecting the quality on internal surface of thin and long steel pipe.In this device,the CCTV lens is used for extract tile flaw information on internal surface of the pipe,and make IBM-PC/AT 486 computer as controlling and image processing system.By this instrument,the functions,such as the digital conversion of input information,image processing,classification of recognition and output display can be obtained.In the petroleum and chemical industry,by using this apparatus,we can detect the quality on internal surface of various metal pipes with real-time automatically.展开更多
Infrastructure development in Nigeria has attracted the attention of researchers in view of the attitudes of contractors and government lead-lag role playing. These attitudes led to the enactment of Fiscal Responsibil...Infrastructure development in Nigeria has attracted the attention of researchers in view of the attitudes of contractors and government lead-lag role playing. These attitudes led to the enactment of Fiscal Responsibility Act 2007 and Public Procurement Act 2007 to reduce internal control system deficiencies and budget indiscipline in the Nigerian public sector fiscal matters and procurement process. Ironically, despite these efforts, infrastructure development is still a problem affecting the lives of Nigerians as their poverty level is on the increase. This paper tests the effects of internal control system deficiency on contractors＇ capability in infrastructure development in the Nigerian public sector. Data drawn from a sample of 228 infrastructures were used for analysis. Two research questions on contractors＇ fiduciary obligation to government and capacity were analysed. Kendall＇s Tau-br correlation of coefficient and Chi-square X^2 statistics were employed for data analysis. Findings show that deficient internal control system strongly and directly breeds deficiency in the contractors＇ capability for infrastructure development. The paper recommends that oath of bribery should complement oath of secrecy to ensure that contractors and government agencies that are responsible for execution of infrastructure play to the rules of the ＂games＂, especially the provisions of Public Procurement Act 2007 and Fiscal Responsibility Act 2007. Public-private-partnership-initiative, such as build-operate and transfer method of contracting, should be encouraged to improve on contractors＇ capability and stewardship.展开更多
Internal quality audits are a key activity in the quality management ofoil projects.Quality management aims at meeting project quality requirements,coordinatingproject progress,assisting in controlling project costs,a...Internal quality audits are a key activity in the quality management ofoil projects.Quality management aims at meeting project quality requirements,coordinatingproject progress,assisting in controlling project costs,and realizing continuousimprovement in project quality management.展开更多
On the basis of analysis of the operating characteristics of SMEs, problems in financial management are pointed out, such as： limited financing channels, lack of internal control systems, weak basic accounting and ba...On the basis of analysis of the operating characteristics of SMEs, problems in financial management are pointed out, such as： limited financing channels, lack of internal control systems, weak basic accounting and backward financial management information construction, and measures like to create a favorable policy and service environment for SMEs through the legal system, to innovate the financial system, to pay attention to nurturing and incentive financial innovation talents, network-building management and to establish related punishment and supervision system, are proposed.展开更多
基金Project(NRF-2012R1A1A4A01002052)supported by Basic Science Research Program through the National Research Foundation(NRF)funded by the Ministry of Education,Science and Technology of Korea
文摘Effective thermal performance of oscillating heat pipe(OHP)is driven by inside pressure distribution.Heat transfer phenomena were reported in terms of pressure and frequency of pressure fluctuation in multi loop OHP charged with aqueous Al2O3 and MWCNTs/Al2O3 nanoparticles.The influences on thermal resistance of aqueous Al2O3,MWCNTs as well as the hybrid of them in OHP having 3 mm in inner diameter were investigated at 60% filling ratio.Experimental results show that thermal characteristics are significantly inter-related with pressure distribution and strongly depend upon the number of pressure fluctuations with time.Frequency of pressure depends upon the power input in evaporative section.A little inclusion of MWCNTs into aqueous Al2O3 at 60% filling ratio achieves the highest fluctuation frequency and the lowest thermal resistance at any evaporator power input though different nanofluids cause different thermal performances of OHPs.
文摘This paper deals with utilization possibility of a kinematical couple of screw-matrix in minimachine mechatronic concept which is assigned to move within the pipes having less than 25 mm of the inner diameter. The principle of the movement for a straightforward motion consists in transformation of the actuator rotary movement through a screw and a nut to the linear motion. It causes a change of distance between the front and rear parts of the minimachine modules. Due to minimization of the dimensions, the electrical control and power supply components are placed outside of the minimachine operating area. The control module is based on a programmable integrated circuit （PIC）.
文摘In this paper,a photoelectric device is introduced,which is used in detecting the quality on internal surface of thin and long steel pipe.In this device,the CCTV lens is used for extract tile flaw information on internal surface of the pipe,and make IBM-PC/AT 486 computer as controlling and image processing system.By this instrument,the functions,such as the digital conversion of input information,image processing,classification of recognition and output display can be obtained.In the petroleum and chemical industry,by using this apparatus,we can detect the quality on internal surface of various metal pipes with real-time automatically.
文摘Infrastructure development in Nigeria has attracted the attention of researchers in view of the attitudes of contractors and government lead-lag role playing. These attitudes led to the enactment of Fiscal Responsibility Act 2007 and Public Procurement Act 2007 to reduce internal control system deficiencies and budget indiscipline in the Nigerian public sector fiscal matters and procurement process. Ironically, despite these efforts, infrastructure development is still a problem affecting the lives of Nigerians as their poverty level is on the increase. This paper tests the effects of internal control system deficiency on contractors＇ capability in infrastructure development in the Nigerian public sector. Data drawn from a sample of 228 infrastructures were used for analysis. Two research questions on contractors＇ fiduciary obligation to government and capacity were analysed. Kendall＇s Tau-br correlation of coefficient and Chi-square X^2 statistics were employed for data analysis. Findings show that deficient internal control system strongly and directly breeds deficiency in the contractors＇ capability for infrastructure development. The paper recommends that oath of bribery should complement oath of secrecy to ensure that contractors and government agencies that are responsible for execution of infrastructure play to the rules of the ＂games＂, especially the provisions of Public Procurement Act 2007 and Fiscal Responsibility Act 2007. Public-private-partnership-initiative, such as build-operate and transfer method of contracting, should be encouraged to improve on contractors＇ capability and stewardship.
文摘Internal quality audits are a key activity in the quality management ofoil projects.Quality management aims at meeting project quality requirements,coordinatingproject progress,assisting in controlling project costs,and realizing continuousimprovement in project quality management.
文摘On the basis of analysis of the operating characteristics of SMEs, problems in financial management are pointed out, such as： limited financing channels, lack of internal control systems, weak basic accounting and backward financial management information construction, and measures like to create a favorable policy and service environment for SMEs through the legal system, to innovate the financial system, to pay attention to nurturing and incentive financial innovation talents, network-building management and to establish related punishment and supervision system, are proposed.
