The alloy temperature dependence of Voffset and Rcontact is studied, and an optimal alloy temperature range for the best trade-off between Voffset and Rcontact, is given for thin base HBTs. In addition,the reason for ...The alloy temperature dependence of Voffset and Rcontact is studied, and an optimal alloy temperature range for the best trade-off between Voffset and Rcontact, is given for thin base HBTs. In addition,the reason for the high Voffset at high alloy temperature is interpreted using Schottky clamped theory. The lower Voffset of our U-shaped emitter HBT than that of traditional strip emitter HBTs is explained.展开更多
In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby ...In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby changing the length and surface roughness of the nanotubes.When the anodizing temperature is increased from 30 to 75℃,the length of the nanotubes increases from 1.459 to 4.183μm,which hinders the transfer of extracellular electrons to the electrodes.On the other hand,the surface roughness of TNA is significantly improved at higher temperatures,which is conducive to electron transfer.Therefore,samples processed at 45℃have the best current output performance.Compared with the treatment at 30℃under anodization,samples processed at 45℃can balance the resistance and roughness and have a higher electron transfer rate;the current output density of which is increased by 1.5 times,and the decolorization rate is increased by 0.8 times.Therefore,proper TNA surface morphology can improve the current output and the potential of wastewater treatment.展开更多
A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital convert...A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.展开更多
文摘The alloy temperature dependence of Voffset and Rcontact is studied, and an optimal alloy temperature range for the best trade-off between Voffset and Rcontact, is given for thin base HBTs. In addition,the reason for the high Voffset at high alloy temperature is interpreted using Schottky clamped theory. The lower Voffset of our U-shaped emitter HBT than that of traditional strip emitter HBTs is explained.
基金The National Major Science and Technology Project(No.2017ZX07202004-005)the Natural Science Foundation of Jiangsu Province(No.BK20171351)+2 种基金the Japan Society for the Promotion of Science(No.P 19056)the National Natural Science Foundation of China(No.51828801)the Fundamental Research Funds for the Central Universities(No.2242016K41042)。
文摘In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby changing the length and surface roughness of the nanotubes.When the anodizing temperature is increased from 30 to 75℃,the length of the nanotubes increases from 1.459 to 4.183μm,which hinders the transfer of extracellular electrons to the electrodes.On the other hand,the surface roughness of TNA is significantly improved at higher temperatures,which is conducive to electron transfer.Therefore,samples processed at 45℃have the best current output performance.Compared with the treatment at 30℃under anodization,samples processed at 45℃can balance the resistance and roughness and have a higher electron transfer rate;the current output density of which is increased by 1.5 times,and the decolorization rate is increased by 0.8 times.Therefore,proper TNA surface morphology can improve the current output and the potential of wastewater treatment.
文摘A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.
