快速充填构筑密闭墙料浆管输参数的分析

快速充填构筑密闭墙是一项新的井下防灭火技术,其中涉及到充填泵的选型。通过充填料浆流变特性的实验,测试了料浆的塑性粘度和初始切应力。在此基础上,分析了料浆管路输送的合理管径和摩擦阻力系数。计算得到料浆管路输送的最大阻力,为充填泵的选型提供了必要的理论依据。

管输温度对EVA型防蜡剂防蜡效果的影响

采用Couette蜡沉积实验装置研究了聚乙烯醋酸乙烯酯(EVA)型防蜡剂对长庆原油蜡沉积特性的影响,分析了不同管输温度条件下EVA型防蜡剂的防蜡效果。研究发现,与空白原油相比,加剂原油的蜡沉积速率大幅降低,同时蜡沉积物的老化速率升高。无论是在恒定油壁温差还是在恒定壁温条件下,EVA型防蜡剂的防蜡效率均随油温的升高而不断降低,EVA对蜡沉积物老化速率的提升幅度均随油温的升高而不断增大。通过分析EVA型防蜡剂对长庆原油流动特性、低温胶凝结构特性及微观蜡晶形貌的影响,阐明了EVA型防蜡剂对长庆原油蜡沉积特性的影响机理,并从蜡沉积物初始凝油层抗剪切强度及蜡分子扩散速率2个角度揭示了管输温度对EVA型防蜡剂防蜡效果的影响。

Data Reconstruction in Internet Traffic Matrix

Traffic matrix is an abstract representation of the traffic volume flowing between sets of source and destination pairs.It is a key input parameter of network operations management,planning,provisioning and traffic engineering.Traffic matrix is also important in the context of OpenFlow-based networks.Because even good measurement systems can suffer from errors and data collection systems can fail,missing values are common.Existing matrix completion methods do not consider traffic exhibit characteristics and only provide a finite precision.To address this problem,this paper proposes a novel approach based on compressive sensing and traffic self-similarity to reconstruct the missing traffic flow data.Firstly,we analyze the realworld traffic matrix,which all exhibit lowrank structure,temporal smoothness feature and spatial self-similarity.Then,we propose Self-Similarity and Temporal Compressive Sensing(SSTCS) algorithm to reconstruct the missing traffic data.The extensive experiments with the real-world traffic matrix show that our proposed SSTCS can significantly reduce data reconstruction errors and achieve satisfactory accuracy comparing with the existing solutions.Typically SSTCS can successfully reconstruct the traffic matrix with less than 32%errors when as much as98%of the data is missing.

Thermogravimetric characteristics and different kinetic models for medical waste composition containing polyvinyl chloride-transfusion tube

Thermogravimetric study of medical transfusion tube （MTT） waste containing polyvinyl chloride （PVC） was carried out using the thermogravimetric analyser （TGA） with N2, at different heating rates of 5, 10, 20, 30, 50 ℃/min. The purpose is to obtain pyrolysis characteristics and kinetic parameters of medical waste. The experimental results indicate that the pyrolysis behavior of the MTT sample is in agreement with its main ingredient of PVC, appearing two stair stepping stages. The influence of the additives in MTT on pyrolysis behavior was also revealed, which could improve MTT pyrolysis at lower temperature in the first stage, and cause obvious unsmoothness and asymmetry of the second DTG peak. Four n-order kinetic models of Coats-Redfern, Ozawa, Kissinger and Freeman-carroll were used to get the kinetic parameters. Furthermore, a novel ＂two-step four-reaction model＂ was established to simulate the whole continuous process. The different methods and the kinetic parameters thus obtained were discussed and compared with each other in literatures. The reasons of deviation among kinetic values were tried to be elucidated. The new established model could more satisfactorily describe the pyrolysis process of MTT, being more mechanistic and conveniently serving for the engineering.

A statistical hiding algorithm based on self-similar network traffic

Although the encryption of network packets significantly increases privacy, the density of the traffic can still provide useful information to the observer, and maybe results in the breach of confidentiality. In this paper, we address issues related to hiding information in self-similar network, which is proved to be similar with modern communication network. And a statistical hiding algorithm is proposed for traffic padding. The figures and the comparison of Hurst Parameters before and after traffic padding, show the effective performance of the algorithm.

Economical and Environmental Effects of Pressure Reducer Valve Substituting by Small Hydro Power-Plants in Gravity Water Transmission Pipelines in Iran

In this work, historical background of power generation by small hydro-power plants across the world and specially across the Iran with emphasis on small hydro-power plant utilization as recovery turbine in water transmission pipeline have been attended firstly, and then, three water transmission pipelines from Chah-nemie to Zahedan city, Shirindare dam to Bojnord city and Mokhtaran desert to Birjand city in Iran have been studied as case study samples. According to the sample pipeline characteristics and pipeline topography, reachable energy have been estimated; in the next step, pay attending to reachable energy, initial investment cost, total benefit of operating period, benefit to cost ratio and other economical parameters for small hydro-power plants in case study pipelines have been presented and generated power cost of the same amount via other resources compared to the hydro-power cost. At the end, in agreement with environmental advantages of small hydro-power plants, the methods of generated power utilization, proper solution for optimization of reachable energy in water transmission pipeline and substitution of pressure reducing valve by small hydro-power plant in the pipelines as a major solution for energy recovering in water pipelines have been proposed.