Some crude oils with high water cut have the capability to flow below the oil gel point, while the oil particles adhere to the pipe wall in the form of paste, also called "wall sticking". Wall sticking is a ...Some crude oils with high water cut have the capability to flow below the oil gel point, while the oil particles adhere to the pipe wall in the form of paste, also called "wall sticking". Wall sticking is a serious problem during the pipeline transportation, leading to partial or total blockage of the pipeline and energy wastage. In this paper, a series of laboratory flow loop experiments were conducted to observe the wall sticking characteristics of crude oil with high water cut, high viscosity and high gel point at low transportation temperatures. The effects of shear stress and water cut on the wall sticking rate and occurrence temperature were investigated. Experimental results indicated that the wall sticking rate and occurrence temperature were lower under stronger shear stress and higher water cut conditions. A criterion of wall sticking occurrence temperature(WSOT) and a regression model of wall sticking rate were then established. Finally, the software was developed to calculate the pressure drop along the pipelines of crude oils with high water-cut. It was able to predict the wall sticking thickness of gelled oil and then calculate the pressure drop along the pipelines. A typical case study indicated that the prediction results obtained from the software were in agreement with actual measured values.展开更多
A quantitative risk assessment （QRA） based on leak detection criteria （LDC） for the design of a proposed subsea oil export pipeline is presented in this paper. The objective of this QRA/LDC study was to determine ...A quantitative risk assessment （QRA） based on leak detection criteria （LDC） for the design of a proposed subsea oil export pipeline is presented in this paper. The objective of this QRA/LDC study was to determine if current leak detection methodologies were sufficient, based on QRA results, while excluding the use of statistical leak detection; if not, an appropriate LDC for the leak detection system would need to be established. The famous UK PARLOC database was used for the calculation of pipeline failure rates, and the software POSVCM from MMS was used for oil spill simulations. QRA results revealed that the installation of a statistically based leak detection system （LDS） can significantly reduce time to leak detection, thereby mitigating the consequences of leakage. A sound LDC has been defined based on QRA study results and comments from various LDS vendors to assist the emergency response team （ERT） to quickly identify and locate leakage and employ the most effective measures to contain damage.展开更多
AIM:With successful surgical treatment of gastroesophageal reflux disease(GERD),there is interest in understanding the anti-reflux barrier and its mechanisms of failure.To date, the potential use of vector volumes to ...AIM:With successful surgical treatment of gastroesophageal reflux disease(GERD),there is interest in understanding the anti-reflux barrier and its mechanisms of failure.To date, the potential use of vector volumes to predict the DeMeester score has not been adequately explored. METHODS:627 patients in the referral database received esophageal manometry and ambulatory 24-hour pH monitoring.Study data included LES resting pressure(LESP), overall LES length(OL)and abdominal length(AL),total vector volume(TVV)and intrabdominal vector volume(IVV). RESULTS:In cases where LESP,TVV or IVV were all below normal,there was an 81.4%probability of a positive DeMeester score.In cases where all three were normal, there was an 86.9%probability that the DeMeester score would be negative.Receiver-operating characteristics(ROC) for LESP,TVV and IVV were nearly identical and indicated no useful cut-off values.Logistic regression demonstrated that LESP and IVV had the strongest association with a positive DeMeester score;however,the regression formula was only 76.1%accurate. CONCLUSION:While the indices based on TVV,IVV and LESP are more sensitive and specific,respectively,than any single measurement,the measurement of vector volumes does not add significantly to the diagnosis of GERD.展开更多
Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load...Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.展开更多
基金the support from the projects of the National Natural Science Foundation of China(No.51374224)for this research
文摘Some crude oils with high water cut have the capability to flow below the oil gel point, while the oil particles adhere to the pipe wall in the form of paste, also called "wall sticking". Wall sticking is a serious problem during the pipeline transportation, leading to partial or total blockage of the pipeline and energy wastage. In this paper, a series of laboratory flow loop experiments were conducted to observe the wall sticking characteristics of crude oil with high water cut, high viscosity and high gel point at low transportation temperatures. The effects of shear stress and water cut on the wall sticking rate and occurrence temperature were investigated. Experimental results indicated that the wall sticking rate and occurrence temperature were lower under stronger shear stress and higher water cut conditions. A criterion of wall sticking occurrence temperature(WSOT) and a regression model of wall sticking rate were then established. Finally, the software was developed to calculate the pressure drop along the pipelines of crude oils with high water-cut. It was able to predict the wall sticking thickness of gelled oil and then calculate the pressure drop along the pipelines. A typical case study indicated that the prediction results obtained from the software were in agreement with actual measured values.
文摘A quantitative risk assessment （QRA） based on leak detection criteria （LDC） for the design of a proposed subsea oil export pipeline is presented in this paper. The objective of this QRA/LDC study was to determine if current leak detection methodologies were sufficient, based on QRA results, while excluding the use of statistical leak detection; if not, an appropriate LDC for the leak detection system would need to be established. The famous UK PARLOC database was used for the calculation of pipeline failure rates, and the software POSVCM from MMS was used for oil spill simulations. QRA results revealed that the installation of a statistically based leak detection system （LDS） can significantly reduce time to leak detection, thereby mitigating the consequences of leakage. A sound LDC has been defined based on QRA study results and comments from various LDS vendors to assist the emergency response team （ERT） to quickly identify and locate leakage and employ the most effective measures to contain damage.
文摘AIM:With successful surgical treatment of gastroesophageal reflux disease(GERD),there is interest in understanding the anti-reflux barrier and its mechanisms of failure.To date, the potential use of vector volumes to predict the DeMeester score has not been adequately explored. METHODS:627 patients in the referral database received esophageal manometry and ambulatory 24-hour pH monitoring.Study data included LES resting pressure(LESP), overall LES length(OL)and abdominal length(AL),total vector volume(TVV)and intrabdominal vector volume(IVV). RESULTS:In cases where LESP,TVV or IVV were all below normal,there was an 81.4%probability of a positive DeMeester score.In cases where all three were normal, there was an 86.9%probability that the DeMeester score would be negative.Receiver-operating characteristics(ROC) for LESP,TVV and IVV were nearly identical and indicated no useful cut-off values.Logistic regression demonstrated that LESP and IVV had the strongest association with a positive DeMeester score;however,the regression formula was only 76.1%accurate. CONCLUSION:While the indices based on TVV,IVV and LESP are more sensitive and specific,respectively,than any single measurement,the measurement of vector volumes does not add significantly to the diagnosis of GERD.
基金financially supported by Offshore Engineering Equipment Scientific Research Project--Topic on Subsea Production System DesignKey Equipment Research & Development from Ministry of Industry and Information Technology of the People's Republic of China E-0813C003
文摘Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.
