Brake friction materials with different zinc powder contents(0,2,4,6,8 wt.%)were fabricated via powder metallurgy method.The results indicate that with the increasing zinc powder content,the density and thermal conduc...Brake friction materials with different zinc powder contents(0,2,4,6,8 wt.%)were fabricated via powder metallurgy method.The results indicate that with the increasing zinc powder content,the density and thermal conductivity of the materials gradually increase,while the hardness decreases monotonously.With increasing zinc powder content,the curve of the nominal friction coefficient shows fluctuating trend but the lowest friction coefficient also shows an increase.However,the wear rate and braking noise of the friction material monotonously decrease with increasing zinc content.This effect may be attributed to the transformation of the tribological mechanism from adhesive wear and abrasive wear to adhesive wear.The brake friction material with 4 wt.%zinc powder exhibits both the best tribological and noise performance.展开更多
Ni-W-P base composites containing CeO2 and SiO2 nano-particles were prepared on common carbon steel surface by pulse co-deposition of Ni,W,P,CeO2 and SiO2 nano-particles.The influence of SiO2 concentrations in bath on...Ni-W-P base composites containing CeO2 and SiO2 nano-particles were prepared on common carbon steel surface by pulse co-deposition of Ni,W,P,CeO2 and SiO2 nano-particles.The influence of SiO2 concentrations in bath on microstructures and properties of Ni-W-P/CeO2-SiO2 composites was studied,and the characteristics were assessed by chemical compositions,element distribution,surface morphologies,deposition rate and microhardness.The results indicate that when SiO2 concentration in bath is controlled at 20 g/L,the composites possess the fastest deposition rate,the highest microhardness,compact microstructures,smaller crystallite sizes and uniform distribution of W,P,Ce and Si within Ni-W-P matrix metal.Increasing SiO2 concentration in bath from 10 to 20 g/L leads to the refinement in grain size and the inhomogeneity of microstructures.While when SiO2 concentration is increased to 30 g/L,the crystallite sizes increase again and some bosses with nodulation shape appear on the surface of composites.展开更多
Nitrogen fertilization is one of the greatest challenges associated with the production of biofuel from corn grain. The objective of this research was to determine the effect of N fertilization on the content and yiel...Nitrogen fertilization is one of the greatest challenges associated with the production of biofuel from corn grain. The objective of this research was to determine the effect of N fertilization on the content and yield of oil, protein, and starch in corn grain. The project was done in Southeast Missouri （USA）, from 2007 to 2009 in a silt loam soil. Corn grain contains 3.8-4.2% oil, 6.7%-8.9% protein, 68.0%-70.4% extractable starch, and 76.0%-77.7% total starch. The total starch yield ranged from 2.8 to 7.8 mg.ha1 whereas the extractable starch varied between 2.5 to 7.1 mg-ha1. As the N rate went up, the oil and starch content of the grain decreased, whereas the protein content and the protein, starch, and oil yields increased, reaching their maximum at the N rate corresponding to 179.0 kg N.ha~. The potential ethanol yield varied between 616.2 and 7,035.1 L-ha1 depending on the method of conversion of the starch into ethanol, the year and the N rate （P 〈 0.0001）. The negative correlation between N fertilization rate and starch content suggested that when farmers add too much N to their soil to increase grain yield, they reduce the starch content in those grains, and consequently the conversion into bioethanol. Therefore, for biofuel production to be beneficial for both farmers and the power plant owners, an agreement needs to be made with regard to the use of fertilizers.展开更多
基金Project(2016YFB1100103)supported by the National Key Research and Development Program of ChinaProject(KC1703004)supported by the Science and Technology Planning Project of Changsha City,ChinaProject(2018ZZTS127)supported by the Fundamental Research Funds for the Central Universities of Central South University,China。
文摘Brake friction materials with different zinc powder contents(0,2,4,6,8 wt.%)were fabricated via powder metallurgy method.The results indicate that with the increasing zinc powder content,the density and thermal conductivity of the materials gradually increase,while the hardness decreases monotonously.With increasing zinc powder content,the curve of the nominal friction coefficient shows fluctuating trend but the lowest friction coefficient also shows an increase.However,the wear rate and braking noise of the friction material monotonously decrease with increasing zinc content.This effect may be attributed to the transformation of the tribological mechanism from adhesive wear and abrasive wear to adhesive wear.The brake friction material with 4 wt.%zinc powder exhibits both the best tribological and noise performance.
基金Project(20806035) supported by the National Natural Science Foundation of ChinaProject(2009CI026) supported by Back-up Personnel Foundation of Academic and Technology Leaders of Yunnan Province,China+4 种基金Project(KKZ6200927001) supported by Opening Fund of Key Laboratory of Inorganic Coating Materials, Chinese Academy of Sciences Project(2007E187M) supported by Applied Basic Research Plans of Yunnan Province,ChinaProject(08C0025) supported by Scientific Research Fund of Yunnan Provincial Education Department, China Project(KKZ3200927029) supported by Training Foundation for Talents of Kunming University of Science and Technology,ChinaProject(2008-003) supported by Analysis and Measurement Research Fund of Kunming University of Science and Technology,China
文摘Ni-W-P base composites containing CeO2 and SiO2 nano-particles were prepared on common carbon steel surface by pulse co-deposition of Ni,W,P,CeO2 and SiO2 nano-particles.The influence of SiO2 concentrations in bath on microstructures and properties of Ni-W-P/CeO2-SiO2 composites was studied,and the characteristics were assessed by chemical compositions,element distribution,surface morphologies,deposition rate and microhardness.The results indicate that when SiO2 concentration in bath is controlled at 20 g/L,the composites possess the fastest deposition rate,the highest microhardness,compact microstructures,smaller crystallite sizes and uniform distribution of W,P,Ce and Si within Ni-W-P matrix metal.Increasing SiO2 concentration in bath from 10 to 20 g/L leads to the refinement in grain size and the inhomogeneity of microstructures.While when SiO2 concentration is increased to 30 g/L,the crystallite sizes increase again and some bosses with nodulation shape appear on the surface of composites.
文摘Nitrogen fertilization is one of the greatest challenges associated with the production of biofuel from corn grain. The objective of this research was to determine the effect of N fertilization on the content and yield of oil, protein, and starch in corn grain. The project was done in Southeast Missouri （USA）, from 2007 to 2009 in a silt loam soil. Corn grain contains 3.8-4.2% oil, 6.7%-8.9% protein, 68.0%-70.4% extractable starch, and 76.0%-77.7% total starch. The total starch yield ranged from 2.8 to 7.8 mg.ha1 whereas the extractable starch varied between 2.5 to 7.1 mg-ha1. As the N rate went up, the oil and starch content of the grain decreased, whereas the protein content and the protein, starch, and oil yields increased, reaching their maximum at the N rate corresponding to 179.0 kg N.ha~. The potential ethanol yield varied between 616.2 and 7,035.1 L-ha1 depending on the method of conversion of the starch into ethanol, the year and the N rate （P 〈 0.0001）. The negative correlation between N fertilization rate and starch content suggested that when farmers add too much N to their soil to increase grain yield, they reduce the starch content in those grains, and consequently the conversion into bioethanol. Therefore, for biofuel production to be beneficial for both farmers and the power plant owners, an agreement needs to be made with regard to the use of fertilizers.
