反雷达涂敷材料中吸收粒子的最佳外形

从颗粒媒质等效电容率和等效导磁率的公式出发,研究了吸波材料电容率和导磁率与成分的关系,讨论了粒子外形对吸波材料电容率和导磁率的影响。给出了吸波材料中吸收剂粒子的最佳形状。上述讨论均给出了对应的实验数据。

含吸收散射粒子半透明介质层的容积吸收特性分析

将 Mie散射理论与蒙特卡罗法相结合分析了含吸收散射粒子半透明介质层的容积吸收特性。考虑了半透明入射表面的折射与反射、不透明壁面的漫反射、半透明介质的吸收以及粒子系的吸收和独立多次非规则各向异性散射。直接由粒子复折射率、粒径及入射辐射波长等基本参数 ,根据 Mie散射理论确定粒子系的吸收、散射因子以及非规则的各向异性散射分布。计算分析了介质层光学厚度、粒子复折射率、尺度参数、粒子系特征参数以及锥形入射时的入射倾角和锥形角对介质层容积吸收性能的影响。

无规取向、无吸收非球形粒子光散射的T-矩阵方法收敛问题的研究:II.椭球体(英文)

较详细地研究了无规取向、无吸收椭球体粒子的T 矩阵收敛问题。首先 ,简要概括了nmax的 3种收敛方案和它们的基本特性。然后 ,应用 1993年提出的数学收敛方法 (M 方法 )和 1998年提出的物理收敛方法 (P 方法 )研究收敛问题。结果表明椭球粒子收敛精度对粒子的尺度参数 ,纵横比以及椭球体的种类 (例如 ,长 扁椭球 )有很强的依赖性。当粒子的尺度参数不太大时 ,甚至在极端纵横比的条件下 ,P 收敛方案优于M 收敛方案。

黑碳团簇气溶胶混合生长的红外吸收特性及长波辐射效应

黑碳气溶胶是当前气溶胶辐射强迫评估中最不确定的因子.本文通过构建黑碳的微物理模型,分别模拟了新鲜状态的黑碳气溶胶和混合生长(老化)后被硫酸盐包裹的黑碳气溶胶,利用叠加T矩阵方法计算获得了具有团簇形态和多成分混合的黑碳气溶胶红外吸收特性,通过大气辐射传输模型模拟了黑碳气溶胶的长波辐射强迫,分析了典型理化参数的敏感性.发现黑碳混合生长可以显著增强其大气层顶的长波辐射强迫,最高可达3倍.而且,包裹黑碳的硫酸盐半径越大,将明显增强大气层顶的黑碳长波辐射强迫.这些发现将有助于降低黑碳气溶胶气候效应评估的不确定性.

Plasmon Induced Heat Funneling from Au to Cu in the Bimetallic Au@Cu Core-Shell Nanoparticles

The bimetallic nanostructures that mix a plasmonic metal with a transition metal in the form of the core-shell nanoparticles are promising to promote catalytic performance.But it is still unclear how the heat(hot electrons and phonons)transfers on the interface between two metals.We have designed and synthesized Au@Cu bimetallic nanoparticles with Au as core and Cu as shell.By using transient absorption spectroscopy,we find that there are two plasmon induced heat funneling processes from Au core to Cu shell.One is the electron temperature equilibrium(electron heat transfer)with equilibration time of~560 fs.The other is the lattice temperature equilibrium(lattice heat transfer)with equilibration time of~13 ps.This plasmon induced heat funneling may be universal in similar bimetallic nanostructures,so our finding could contribute to further understanding the catalytic mechanism of bimetallic plasmonic photothermal catalysis.

宽波段烟幕干扰技术研究

扼要介绍国外宽波段干扰技术的最新进展和研究动态 ,指出技术实施的难点关键。结合我国国防现状 。

球形水滴散射面积比的计算

本文根据微粒子Mie散射理论,得到了对球单粒子的散射面积比,并对其进行了计算,所得结论与文献[1]给出得结论进行了比较,所得结果可以研究无吸收粒子对电磁波传输得影响。

Bimodal visualization of colorectal uptake of nanoparticles in dimethylhydrazine-treated mice

AIM:To investigate colorectal uptake of solid lipid nanoparticles(SLNs) in mice receiving different doses of 1,2-dimethylhydrazine(DMH) using magnetic resonance(MR) and laser-scanning confocal fluorescence microscope(LSCFM) imaging.METHODS:Eight mice were sacrificed in a pilot study to establish the experimental protocol and to visualize colorectal uptake of SLNs in normal mice.Gadopentetate dimeglumine and fluorescein isothiocyanate(FITC)-loaded SLN(Gd-FITC-SLN) enemas were performed on mice receiving DMH for 10 wk(group 1,n = 9) or 16 wk(group 2,n = 7) and FITC-SLN enema wasperformed on 4 DMH-treated mice(group 3).Pre-and post-enema MR examinations were made to visualize the air-inflated distal colorectum.Histological and LSCFM examinations were performed to verify colorectal malignancy and to track the distribution of SLNs.RESULTS:Homogeneous enhancement and dense fluorescence(FITC) deposition in colorectal wall were observed in normal mice and 1 DMH-treated mouse(group 1) on fluid attenuated inversion recovery(FLAIR) and LSCFM images,respectively.Heterogeneous mural enhancement was found in 6 mice(4 in group 1;2 in group 2).No visible mural enhancement was observed in the other mice.LSCFM imaging revealed linear fluorescence deposition along the colorectal mucosa in all groups.Nine intraluminal masses and one prolapsed mass were detected by MR imaging with different enhancement modes and pathologies.Interstitial FITC deposition was identified where obvious enhancement was observed in FLAIR images.Bladder imaging agent accumulations were observed in 11 of 16 DMH-treated mice of groups 1 and 2.CONCLUSION:There are significant differences in colorectal uptake and distribution of SLNs between normal and DMH-treated mice,which may provide a new mechanism of contrast for MR colonography.

Research on anti-contact fatigue performance of grease containing nano SbSbS_4 particles

Effects of nano SbSbS4particles on contact fatigue life of a steel ball were evaluated on a self-made ball-rod contact fatigue tester. The anti-fatigue mechanisms of SbSbS4 additive were analyzed by means of SEM and EDAX. It was shown that, when the grease contained SbSbS4, contact fatigue life was improved compared with that of base grease. Nanoparticle absorption action, nanoparticle infiltration action, and extreme pressure and anti-friction performance, explained why SbSbS4 increased the contact fatigue life of the steel ball tested.

Optical Nonlinearity of Surface Plasmon Resonance Emission from Au Colloidal Nanoparticles

Suspended gold nanoparticles have been synthesized via electrochemical method.Fluorescence excitation and emission spectra were obtained using a spectrofluorophotometer.With varying the excitation wavelength,an emission peak fixed at 485 nm has always been observed.We believe that this peak is attributed to the surface plasmon resonance.When the detection wavelength was fixed at 485 nm (0.619×10 15 Hz),a double frequency exciting peak at 242 nm(2×0.619×10 15 Hz), a 3/2 fraction frequency exciting peak at 330 nm (about 3/2×0.619×10 15 Hz)and a 3/4 fraction frequency exciting peak at 640 nm(3/4×0.619×10 15 Hz)display.The nonlinear exciting peak at 640 nm corresponds to the two-photon absorption.Therefore,as the excitation wavelength is at 320 and 640 nm respectively,single-photon and two-photon absorption induced surface plasmon resonance emission peaks were observed. These nonlinear surface plasmon resonance emission characters of Au colloidal nanoparticles make it possible to enhance the sensitivity of conventional surface plasmon resonance device.

Synthesis of flowerlike nickel particles and their microwave absorbing properties

Two kinds of nickel particles with flower-like struc~＇es assembled with a number of nano-flakes were synthesized and the relationship of their morphology and microwave absorbing properties was studied. The electromagnetic parameters of these flower-like Ni were measured with vector network analyzer at 2-18 GHz frequency and the reflection losses （RL） with different sample thicknesses were calculated. The results indicate that the flower-like nickel-wax composites with the sample thickness less than 2 mm show excellent absorbing ability. This result is expected to play a guiding role in the preparation of the highly efficient absorber.

Absorption Cross Section of Static Einstein-Maxwell Dilation Axion Black Hole for Scalar Particles

The absorption cross section of the static Einstein-Maxwell dilaton axion （EMDA） black hole for scalar particles is investigated. It is shown that the ratio of the absorption cross section of the EMDA black hole to that of the Schwarzschild black hole decreases as the absolute value of the dilaton increases, and it becomes zero as the dilaton tends to its extremal value. It is also shown that the absorption cross section decreases as both the v and the absolute value of the dilaton increase, and it decreases as the mass of the particle decreases.

Large Enhancement of Probe Amplification with Population Inversion in a Four-Level Atomic System with Vacuum-Induced Coherence

In this paper, we discuss and analyze theoretically probeabsorption-amplification response in a four-level coherent atomic system with vacuum-inducedcoherence via changing the sign of the parameter f, with f denoting the ratio of a pair of dipolemoments associated with a doublet of closely upper hypernne sublevels. We find that the amplitude ofthe probe amplification for the case f = -1 can be about one order of magnitude larger than thatachievable for the case f = 1. In addition, with respect to the case f = -1 the probe amplificationcan be maintained all the time with weak incoherent pumping for a wide range of the probe detuning.

Synthesis of crosslinked polystyrene particles by seeded batch polymerization with monomer absorption

A highly crosslinked, monodispersed polystyrene（PS） particle was prepared by a seeded batch dispersion polymerization with a monomer absorption method. Prior to polymerization, 1,9 lam monodispersed PS seed particles were treated under an optimum condition of monomer absorption. The effects of divinylbenzebe（DVB） concentration and polymerization temperature were examined for styrene（in PS seed）/styrene（in the second stage） mass ratio of 1：1 in the medium range of EtOH/water mass ratio of 100/0-80/20 and 2.3 μm uniform crosslinked PS particles containing 15%-20% （mass fraction） DVB were prepared at 60-70 ℃. The results show that monomer absorption before the second stage of polymerization is more effective to prepare highly crosslinked monodispersed PS particles.

High densities of magnetic nanoparticles supported on graphene fabricated by atomic layer deposition and their use as efficient synergistic microwave absorbers

An atomic layer deposition （ALD） method has been employed to synthesize Fe3O4/graphene and Ni/graphene composites. The structure and microwave absorbing properties of the as-prepared composites are investigated. The surfaces of graphene are densely covered by Fe3O4 or Ni nanoparticles with a narrow size distribution, and the magnetic nanoparticles are well distributed on each graphene sheet without significant conglomeration or large vacancies. The coated graphene materials exhibit remarkably improved electromagnetic （EM） absorption properties compared to the pristine graphene. The optimal reflection loss （RL） reaches -46.4 dB at 15.6 GHz with a thickness of only 1.4 mm for the Fe3O4/graphene composites obtained by applying 100 cycles of Fe2O3 deposition followed by a hydrogen reduction. The enhanced absorption ability arises from the effective impedance matching, multiple interfacial polarization and increased magnetic loss from the added magnetic constituents. Moreover, compared with other recently reported materials, the composites have a lower filling ratio and smaller coating thickness resulting in significantly increased EM absorption properties. This demonstrates that nanoscale surface modification of magnetic particles on graphene by ALD is a very promising way to design lightweight and high-efficiency microwave absorbers.

Effect of Astragali and Angelica particle on proteinuria in Chinese patients with primary glomerulonephritis

OBJECTIVE: To investigate the effect of the traditional Chinese herbs Astragali and Angelicae Sinensis(A & As) particle [contains Huangqi(Radix Astragali Mongolica), Danggui(Radix Angelicae Sinensis),Huzhanggeng(Rhizoma Polygoni Cuspidati) and Danshen(Radix Salviae Miltiorrhizae)] on proteinuria in glomerulonephritis patients with stage 2 chronic kidney disease.METHODS: A prospective, multi-center, and randomized controlled clinical trial was performed for 24 weeks. From March 2011 to April 2012, 158 patients from nine hospitals in China participated.They were randomized into the A&As group(79 cases, A&As particle 15.2 g/day) and losartan group(79 cases, losartan 50 mg/day). At each follow-up visit, clinical data including blood pressure, urinalysis, 24-h-urinary protein excretion, serum albumin and serum creatinine were collected.RESULTS: All 158 patients completed the follow-up. Proteinuria in the losartan group exhibited a biphasic time-dependent decline with a significant steady reduction from baseline to week 12(P = 0.0014), and a platform level during the remaining 12-week follow-up(P > 0.05). In contrast, there was a continual significant decrease of proteinuria in the A & As group(P < 0.001). When compared with the losartan results, proteinuria in the A & As group from week 16 to week 24 was significantly reduced(P < 0.001). Stable e GFRs and blood pressure were also observed in both groups. Medication side effects were minimal and non-fatal.CONCLUSION: For Chinese glomerulonephritis patients with stage 2 chronic kidney disease, therapy with A & As particles may provide effective anti-proteinuria treatment.

Controlled synthesis and shape-dependent electromagnetic wave absorption characteristics of porous Fe_3O_4 sub-micro particles

Porous Fe3O4 sub-micro particles with sphere-like, cube-like and walnut-like morphologies were obtained by a two-step process, and the electromagnetic properties of the Fe3O4 particle/wax composites were investigated. The reflect loss was less than -20 dB for all of the composites in different frequency ranges. The cube-like and walnut-like Fe3O4 composites exhibit improved complex permittivity and permeability and dual-frequency and wide bandwidth absorption characteristics, which is mainly attributed to the larger shape anisotropy. Such a high absorption property indicates that these porous Fe3O4 particles with various morphologies are very promising for electromagnetic wave absorptive materials.