元活动模型驱动的多领域制造资源粒层化服务封装与检索

多领域制造资源的聚合与服务封装直接关系到云制造服务的可检索性与易用性,是实现制造能力共享的关键。针对因缺乏关键资源信息或制造活动过程特征,以及服务特征属性不确定性大等导致云服务信息粒度过粗、查准率低的问题,构建了以人、机、料、法、环为核心要素的制造元活动模型以实现多领域资源颗粒的有效聚合,并基于商空间粒计算理论对资源簇的制造能力进行逐层封装,提出基于灰相似粗糙集的云制造服务粒层递归搜索算法以解决服务特征属性的不确定性问题,建立了一套元活动模型驱动的多领域制造资源粒层化服务封装与检索方法。通过某金属构件快速成形云服务的检索算例验证了所提方法的可行性。

基于商空间的多层粒化社区发现方法

社区发现旨在挖掘复杂网络的社区结构,现有的社区发现方法普遍存在着划分速度和精度不均衡的问题.商空间理论是一种粒度计算理论,通过粒度变换来降低问题求解复杂度,同时保持问题求解精度.提出一种基于商空间的多层粒化社区发现方法(multilayer granulation community detection method based on quotient space,MGQS).该方法首先通过快速粒化操作对复杂网络进行多层次粒化,形成逐层粒化、逐层抽象的多粒度商空间,再依据所求问题选择最佳粒层作为最终划分结果.在公用数据集上的系列实验结果表明,相比于其他算法,该方法既能快速划分不同类型和规模的网络,也能获取多粒度的社区结构并根据所求问题选择最佳粒层,取得较高的模块度值和NMI值.

Application of Composite Ultrafine Particles in ER Fluids

Aim To obtain a kind of electrorheological (ER) flind with high comprehensive properties in order to satisfy the needs of engineering application. Methods A new type of dispersed phase── composite ultrafine particles (UFP) was obtained by the method of microemulsion, which was used to mix with silicon oil. aam electroinduced stress and apparent viscosity of the ER fluids with three different volume fractions were tested under the conditions of different temperatures, electric fields and shear rates. Results A series of systematic tests show that the new type of ER fluids with volume fraction of 30% possesses obvious ER effect. Conclusion The double layers polarization plays an important role in ER effect.

CeO2/Zn NANOCOMPOSITE COATING BY ELECTRODEPOSITION

The nanocomposite coating is obtained by electrochemical deposition of the zinc plating solution with ceria nanoparticles (mean diameter 30 nm). The effect of ceria nanoparticles on the electrodeposited zinc coating is stu died by weight loss test, inductively copuled plasma quantometer (ICP), scanning electron microscopy (SEM) and X ray diffraction (XRD), respectively. It is found that under the same electrodeposition conditions, the corrosion resistance of the nanocomposite coating increases obviously while that of the micron composite coating only improves slightly; The ceria content of the nanocomposite coating is more than that of the micron composite coating. Ceria nanoparticles modify the surface morphology and crystal structure of the zinc matrix in correlation with the increase of corrosion resistance.

Research on the Critical Conditions for Clay Particle Release During Saline Aquifer Freshening Process

Water sensitivity phenomenon occurs during saline aquifer freshening process in seawater intrusion area, and clay particles released in the phenomenon can damage the infiltration capacity of the aquifer. In order to find out the factors and mechanisms for clay particle release, laboratory column infiltration experiments simulating saline aquifer freshening process were designed to measure the critical conditions(critical flow velocity, critical salt concentration and critical ionic strength) and force analysis for clay particle according to DLVO electric double layer theory was employed to illustrate the mechanisms for particle release. The research results showed that critical flow velocity for clay particle release is influenced by salt concentration of injecting solution. When salt concentration of injecting solution is very high, clay particles are not released, indicating that there does not exist a critical flow velocity in this situation. As salt concentration of injecting solution decreases, particles start to be released. The critical salt concentration for clay particle release is 0.052 mol L-1 in our work, which was determined by a constant-flux experiment for stepwise displacement of high concentration Na Cl solution. The critical ionic strength for clay particle release decreases as Ca2+ molar content percentage of the mixed solution of Na Cl and Ca Cl2 increases following the first-order exponential decay equation y = 0.0391e-0.266 x + 0.0015.

Schemes for Probabilistic Teleportation of an Unknown Three-Particle Three-Level Entangled state

In this paper, two schemes for teleporting an unknown three-particle three-level entangled state are proposed. In the first scheme, two partial three-particle three-level entangled states are used as the quantum channels, while in the second scheme, three two-particle three-level non-maximally entangled states are employed as quantum channels. It is shown that the teleportation can be successfully realized with certain probability, for both two schemes, ira receiver adopts some appropriate unitary transformations. It is shown also that the successful probabilities of these two schemes are different.

Pore structure of ore granular media by computerized tomography image processing

The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.

Effects of TaN nanoparticles on microstructure,mechanical properties and tribological performance of PEEK coating prepared by electrophoretic deposition

In order to solve the friction,wear and lubrication problems of titanium,a series of TaN/ployether−ether−ketone(PEEK)coatings were developed by electrophoretic deposition,and the effects of TaN nanoparticles on the microstructure,mechanical properties and tribological performance of coatings were explored.Results manifest that the introduction of TaN nanoparticles into PEEK coatings could improve the deposition efficiency,enhance the resistant deform capacity,increase the hardness,elastic modulus and adhesive bonding strength.Compared with the pure PEEK coating,the friction coefficient of P-TN-3 was greatly reduced by 31.25%.The wear resistance of P-TN-3 was also improved in huge boost,and its specific wear rate was decreased from 9.42×10^(−5) to 1.62×10^(−5) mm^(3)·N^(−1)·m^(−1).The homogeneous composite TaN/PEEK coatings prepared by electrophoretic deposition were well-adhered to the titanium alloy substrate,TaN nanoparticles could improve the strength of PEEK coating,and provide wear-resistance protection for titanium alloys.

Sub-nanometer-thick Al2O3 Overcoat Remarkably Enhancing Thermal Stability of Supported Gold Catalysts

Supported gold nanoparticle catalysts show extraordinarily high activity in many reactions. While the relative poor thermal stability of Au nanoparticles against sintering at elevated temperatures severely limits their practical applications. Here atomic layer deposition （ALD） of TiO2 and Al2O3 was performed to deposit an Au/TiO2 catalyst with precise thickness con-trol, and the thermal stability was investigated. We surprisingly found that sub-nanometer-thick Al2O3 overcoat can su ciently inhibit the aggregation of Au particles up to 600 C in oxygen. On the other hand, the enhancement of Au nanoparticle stability by TiO2 overcoat is very limited. Di use reffectance infrared Fourier transform spectroscopy （DRIFTS） of CO chemisorption and X-ray photoelectron spectroscopy measurements both con rmed the ALD overcoat on Au particles surface and suggested that the presence of TiO2 and Al2O3 ALD overcoat on Au nanoparticles does not considerably change the electronic properties of Au nanoparticles. The catalytic activities of the Al2O3 overcoated Au/TiO2 catalysts in CO oxidation increased as increasing calcination temperature, which suggests that the embed-ded Au nanoparticles become more accessible for catalytic function after high temperature treatment, consistent with our DRIFTS CO chemisorption results.

Decomposition Kinetics for Formation of CO_2 Hydrates in Natural Silica Sands

The decomposition kinetics for formation of CO2 hydrates in 90 cm 3wet natural silica sands were studied systematically using the depressurization method at the temperatures ranging from 273.2 to 277.2 K and the pressures from 0.5 to 1.0 MPa.The effects of temperature,pressure,particle diameter,porosity,and salinity of formation water on the decomposition kinetics were investigated.The results show that the dissociation percentage increases as temperature increases or as the initial decomposition pressure decreases.An increase in porosity or a decrease in particle diameter of silica sands accelerates the decomposition.Increasing the salinity of the formation water gives rise to a faster decomposition.However,a combination of the present results with the observations in literature reveals that the effect of the coexisting ionic solute depends on its chemical structure.

Silver Nanoparticles Synthesized by Laser Ablation in Acetone： Influence of Ablation Time and Their Reactivity with Oxygen in the Air

In this work, a method is proposed to control silver nanoparticle dimensions produced by laser ablation varying the ablation time and introducing a sonication phase between ablation and the successive deposition on the substrate. The absorption spectra during laser ablation show a main band, which identifies the dimensions of main particles. The appearance of secondary bands indicates the beginning of an aggregation process with the formation of a small concentration of particles which are spheroid in shape. SEM （secondary electron microscope） images of particle produced with different ablation times confirm the results of absorption measurements. X-ray photoelectron spectroscopy and cathodo-luminescence spectroscopy indicate a high reactivity of the nanoparticles deposited on a substrate. They react with oxygen in the air forming an oxide layer which reveals a luminescence in the blue region.

Gold/monolayer graphitic carbon nitride plasmonic photocatalyst for ultrafast electron transfer in solar-to-hydrogen energy conversion

Gold(Au)plasmonic nanoparticles were grown evenly on monolayer graphitic carbon nitride(g‐C3N4)nanosheets via a facile oil‐bath method.The photocatalytic activity of the Au/monolayer g‐C3N4 composites under visible light was evaluated by photocatalytic hydrogen evolution and environmental treatment.All of the Au/monolayer g‐C3N4 composites showed better photocatalytic performance than that of monolayer g‐C3N4 and the 1%Au/monolayer g‐C3N4 composite displayed the highest photocatalytic hydrogen evolution rate of the samples.The remarkable photocatalytic activity was attributed largely to the successful introduction of Au plasmonic nanoparticles,which led to the surface plasmon resonance(SPR)effect.The SPR effect enhanced the efficiency of light harvesting and induced an efficient hot electron transfer process.The hot electrons were injected from the Au plasmonic nanoparticles into the conduction band of monolayer g‐C3N4.Thus,the Au/monolayer g‐C3N4 composites possessed higher migration and separation efficiencies and lower recombination probability of photogenerated electron‐hole pairs than those of monolayer g‐C3N4.A photocatalytic mechanism for the composites was also proposed.

The stability research of coated sodium butyrate

The objective of this study is to research the stability of sodium butyrate in feedstuff. The sodium butyrate with three types of coated, common and granule was produced at three differ- ent feed mills and sampled and determined the content. The results showed that the retention rate of common sodium butyrate was 7.35% through carrier difference, mixing, granulating, stomach and digestive tract forepart. The retention rates of granule and coated sodium butyrate （the content of sodium butyrate is 30%） were 17.04% and 72.66% respectively. Therefore, the stability of coated sodium butyrate is obviously higher than common and granule sodium butyrate.

Tuning SnO_2 surface with CuO for soot particulate combustion: The effect of monolayer dispersion capacity on reaction performance

With the objective to investigate the structure-reactivity relationship of CuO/SnO2 and eventually design more applicable catalysts for soot combustion,catalysts with different CuO loadings have been prepared by impregnation method.By using X-ray diffraction and X-ray photoelectron spectroscopy extrapolation methods,it is disclosed that CuO disperses finely on the SnO2 support to form a monolayer with a capacity of 2.09 mmol 100 m^-2,which equals 4.8 wt%CuO loading.When the CuO loading is below the capacity,it is in a sub-monolayer state.However,when the loading is above the capacity,CuO micro-crystallites will be formed that coexist with the CuO monolayer.The soot combustion activity of the catalyst increases with the CuO loading until it reaches the monolayer dispersion capacity.A further increase in the CuO loading has no evident influence on the activity.Raman results have testified that with the addition of CuO onto the SnO2 support,a surface-active oxygen species can be formed,the amount of which also increases significantly with the increase in the CuO loading until it reaches the monolayer dispersion capacity.Increasing the CuO loading further has no evident impact on the amount of surface oxygen.Therefore,an apparent monolayer dispersion threshold effect is observed for soot combustion over CuO/SnO2 catalysts.It is concluded that the amount of surface-active oxygen sites is the major factor determining the activity of the catalyst.

Resilient Modulus of Hydraulically Bound Road Base Materials with High Volume Waste Dust

The paper presents laboratory test results on hydraulically bound road base materials containing high volume of steel slag and blast furnace slag waste dusts compared with control mixtures. These mixtures contain higher levels of （4mm-0.0 mm） dust, than would be the case in standard un bound road base mixtures. The combined influence of the steel slag and granulated blast furnace slag wastes content is to enhance the stiffness of the road base materials and save materials and cost during road construction. Triaxial repeated load tests were performed on the unbound and lightly bound materials to measure their resilient modulus. The test results show important improvements in the bond strength between the contents of road base materials. This offers the prospect of using these materials in road base materials to reduce the use of primary aggregates and thus minimize the cost of roads and highways construction.

Individual Aerosol Particles Emitted in the Ceramic-Tile Industry in Chihuahua, Mexico

The contribution of anthropogenic mineral aerosol dust has been of interest to understand the impact of dust aerosols on climate, and the health of workers occupational exposure. Several studies have been investigated the physical and chemical properties mainly in particulate matter. However, the characterizations have not extended diameters below to 1.0 μm. In this study, it described chemical composition and shape measurements of individual aerosol particles with 50% cut-off diameters less than 1.1 μm emitted at ceramic-tile manufacturing. Four emission sites of process were selected, and their samples were collected using a cascade-impactor, investigated using X-ray diffraction, energy dispersive X-ray spectroscopy, and digital image processing, where the data were analysed applying a combination of principal component and cluster analysis. Particles of tectosilicate （quartz, zeolite）, phyllosilicate （illite, montmorillonite）, and inosilicate （calcium silicate） were founded in all sampling sites; also, silicates mixed with transition metals oxides used as pigments （e.g., Fe, Ti, Co, Ni, Zn and Mo）. Silicates were granulated and flat crystals with a transparent, translucent appearance; otherwise, the mixture had flake shapes and opaque appearance. Analyses of multivariate data showed that the process stages emissions were related with specific composition and shape suggesting the use three measurements related （1） the internal axis, （2） roundness and （3） roughness to isolate particles shapes, and the presence of transition metals oxides as emissions tracer of the ceramic industry.

Experimental study of a supersonic turbulent boundary layer using PIV

Particle image velocimetry was applied to the study of the statistical properties and the coherent structures of a fiat plate turbulent boundary layer at Mach 3. The nanoparticles with a good flow-following capability in supersonic flows were adopted as the tracer particles in the present experiments. The results show that the Van Driest transformed mean velocity profile satisfies the incompressible scalings and reveals a log-law region that extends to yld=0.4, which is further away from the wall than that in incompressible boundary layers. The Reynolds stress profiles exhibit a plateau-like region in the log-law region. The hairpin vortices in the streamwise-wall-normal plane are identified using different velocity decompositions, which are similar to the results of the flow visualization via NPLS technique. And multiple hairpin vortices are found moving at nearly the same velocity in different regions of the boundary layer. In the streamwise-spanwise plane, elongated streaky structures are observed in the log-law region, and disappear in the outer region of the boundary layer, which is contrary to the flow visualization results.

Alumina-coated Ag nanocrystal monolayers as surfaceenhanced Raman spectroscopy platforms for the direct spectroscopic detection of water splitting reaction intermediates

A novel Ag-alumina hybrid surface-enhanced Raman spectroscopy （SERS） platform has been designed for the spectroscopic detection of surface reactions in the steady state. Single crystalline and faceted silver （Ag） nanoparticles with strong light scattering were prepared in large quantity, which enables their reproducible self-assembly into large scale monolayers of Raman sensor arrays by the Langrnuir-Blodgett technique. The close packed sensor film contains high density of sub-nm gaps between sharp edges of Ag nanoparticles, which created large local electromagnetic fields that serve as ＂hot spots＂ for SERS enhancement. The SERS substrate was then coated with a thin layer of alumina by atomic layer deposition to prevent charge transfer between Ag and the reaction system. The photocatalytic water splitting reaction on a monolayer of anatase TiO2 nanoplates decorated with Pt co-catalyst nanoparticles was employed as a model reaction system. Reaction intermediates of water photooxidation were observed at the TiO2/solution interface under UV irradiation. The surface-enhanced Raman vibrations corresponding to peroxo, hydroperoxo and hydroxo surface intermediate species were observed on the TiO2 surface, suggesting that the photo-oxidation of water on these anatase TiO2 nanosheets may be initiated by a nucleophilic attack mechanism.

Chemical synthesis and characterization of manganese oxide coated Ni particles

Nanosized Ni particles with an average diameter of about 8 nm were prepared by reducing of NiCl 2 with sodium borohydride (NaBH 4 ) in aqueous solution. By moderate annealing in protective atmosphere, the composite grew up to be 15-20 nm particles. Both of the as-prepared and annealed Ni particles were coated by a layer of manganese oxide via decomposition reaction in aqueous KMnO4 solution. Hysteresis loops of as-prepared samples show a large increase in the magnetization with decreasing temperature and an unsaturated component at high magnetic field. In contrast, the ferromagnetic characteristics of annealed one are much stronger with large magnetization and coercivity. The thermomagnetic curves verified the coexistence of ferromagnetic Ni and antiferromangetic Mn oxide phases. But there exists no exchange bias behavior in the samples, even though the interface structure between the ferromagnetic Ni core and the antiferromagnetic manganese oxides has been distinctly formed. The absence of exchange bias probably originates from the weak ferromagnetic characteristic of Ni cores.

Rapid nanopatterning technique based on monolayer silica nanosphere close-packing by spin coating

Nanoparticles monolayer formation by spin coating is considered to be a simple, fast and inexpensive nanopatteming technique However, the parameters that govern the overall growth process in this technique are not completely quantified and techniques for the controlled and continuous growth of close packed monolayer particle arrays without defects need to be developed. In this paper, an ordered particle array formation process is analyzed theoretically, employing material flux balance and parti- cle-subjected forces balance, based on the film thickness model of spin coating and evaporation rate law. A series of experi- ments were conducted using silica particle suspensions with various particle volume fractions and different spin speeds. The results show that the spin speed should match the particle volume fraction to meet the requirements of material flux and particles movement in order to obtain a close packed monolayer film. The formation mechanism of fabrication defects involving particle agglomeration and uncontrollable voids were analyzed qualitatively based on crystal growth theory, and validation experiments were performed. The formation of highly uniform close-packed monolayer films was demonstrated and the condi- tion requirements for achieving monolayer nanoparticles array with good quality presented.