A titania pillared interlayered clay（Ti-PILC） supported vanadia catalyst（V2O5/TiO2-PILC） was prepared by wet impregnation for the selective catalytic reduction（SCR） of NO with ammonia. Compared to the traditiona...A titania pillared interlayered clay（Ti-PILC） supported vanadia catalyst（V2O5/TiO2-PILC） was prepared by wet impregnation for the selective catalytic reduction（SCR） of NO with ammonia. Compared to the traditional V2O5/TiO2 and V2O5-MoO3/TiO2 catalysts, the V2O5/TiO2-PILC catalyst exhibited a higher activity and better SO2 and H2O resistance in the NH3-SCR reaction. Characterization using TPD, in situ DRIFT and XPS showed that surface sulfate and/or sulfite species and ionic SO4^（2-）species were formed on the catalyst in the presence of SO2. The ionic SO4^（2-） species on the catalyst surface was one reason for deactivation of the catalyst in SCR. The formation of the ionic SO4^（2-） species was correlated with the amount of surface adsorbed oxygen species. Less adsorbed oxygen species gave less ionic SO4^（2-） species on the catalyst.展开更多
The use of H2SO4‐,HCl‐,H3PO4‐,and CH3COOH‐activated montmorillonite(Mt)and WOx/H3PO4‐activated Mt as catalysts for the gas‐phase dehydration of glycerol was investigated.The WOx/H3PO4‐activated Mt catalysts wer...The use of H2SO4‐,HCl‐,H3PO4‐,and CH3COOH‐activated montmorillonite(Mt)and WOx/H3PO4‐activated Mt as catalysts for the gas‐phase dehydration of glycerol was investigated.The WOx/H3PO4‐activated Mt catalysts were prepared by an impregnation method using H3PO4‐activated Mt(Mt‐P)as the support.The catalysts were characterized using powder X‐ray diffraction,Fourier‐transform infrared spectroscopy,N2adsorption‐desorption,diffuse reflectance ultraviolet‐visible spectroscopy,temperature‐programmed desorption of NH3,and thermogravimetric analysis.The acid activation of Mt and WOx loaded on Mt‐P affected the strength and number of acid sites arising from H+exchange,the leaching of octahedral Al3+cations from Mt octahedral sheets,and the types of WOx(2.7≤x≤3)species(i.e.,isolated WO4/WO6‐containing clusters,two‐dimensional[WO6]polytungstates,or three‐dimensional WO3crystals).The strong acid sites were weakened,and the weak and medium acid sites were strengthened when the W loading on Mt‐P was12wt%(12%W/Mt‐P).The12%W/Mt‐P catalyst showed the highest catalytic activity.It gave a glycerol conversion of89.6%and an acrolein selectivity of81.8%at320°C.Coke deposition on the surface of the catalyst led to deactivation.展开更多
Taguchi method, largely used to optimize processes controlled by manifold parameters, has been utilized to improve the synthesis of carbon nanotubes by chemical vapor deposition of isobutane. Analyzing results obtaine...Taguchi method, largely used to optimize processes controlled by manifold parameters, has been utilized to improve the synthesis of carbon nanotubes by chemical vapor deposition of isobutane. Analyzing results obtained in nine suitably designed reactions, the influence of synthesis （773-973 K）, calcinations （723-1,023 K） and reduction （773-973 K） temperatures and catalyst-support （alumina, magnesia or Na＋-exchanged K10 clay） on specific yield and crystallization degree （i.e., C sp2 content） of the nanotubes has been ranked. After critical examination and adjusting of conditions predicted to give optimal results, -50 g of nanotubes per gram of metal are obtained at 973 K over Fe/alumina catalysts calcined at 723 K and reduced at 773 K. Under the same conditions, highly crystallized nanotubes （with 73% of C sp2 bonds, as qualitatively estimated from Raman spectroscopy）, suitable for electro-catalysis applications, are synthesized over Fe/clay catalysts.展开更多
基金supported by the National Natural Science Foundation of China(21277009,21577005)~~
文摘A titania pillared interlayered clay（Ti-PILC） supported vanadia catalyst（V2O5/TiO2-PILC） was prepared by wet impregnation for the selective catalytic reduction（SCR） of NO with ammonia. Compared to the traditional V2O5/TiO2 and V2O5-MoO3/TiO2 catalysts, the V2O5/TiO2-PILC catalyst exhibited a higher activity and better SO2 and H2O resistance in the NH3-SCR reaction. Characterization using TPD, in situ DRIFT and XPS showed that surface sulfate and/or sulfite species and ionic SO4^（2-）species were formed on the catalyst in the presence of SO2. The ionic SO4^（2-） species on the catalyst surface was one reason for deactivation of the catalyst in SCR. The formation of the ionic SO4^（2-） species was correlated with the amount of surface adsorbed oxygen species. Less adsorbed oxygen species gave less ionic SO4^（2-） species on the catalyst.
基金supported by the National Natural Science Foundation of China(21373185,41672033,21506188,21404090)the Open Project Programs of Engineering Research Center of Non-metallic Minerals of Zhejiang Province(ZD2015k07)+2 种基金of State Key Laboratory Breeding Base of Green Chemistry-Synthesis Technology(GCTKF2014006)of Key Laboratory of High Efficient Processing of Bamboo of Zhejiang Province(2016)of State Key Laboratory of Chemical Resource Engineering,Beijing University of Chemical Technology(CRE-2016-C-303)~~
文摘The use of H2SO4‐,HCl‐,H3PO4‐,and CH3COOH‐activated montmorillonite(Mt)and WOx/H3PO4‐activated Mt as catalysts for the gas‐phase dehydration of glycerol was investigated.The WOx/H3PO4‐activated Mt catalysts were prepared by an impregnation method using H3PO4‐activated Mt(Mt‐P)as the support.The catalysts were characterized using powder X‐ray diffraction,Fourier‐transform infrared spectroscopy,N2adsorption‐desorption,diffuse reflectance ultraviolet‐visible spectroscopy,temperature‐programmed desorption of NH3,and thermogravimetric analysis.The acid activation of Mt and WOx loaded on Mt‐P affected the strength and number of acid sites arising from H+exchange,the leaching of octahedral Al3+cations from Mt octahedral sheets,and the types of WOx(2.7≤x≤3)species(i.e.,isolated WO4/WO6‐containing clusters,two‐dimensional[WO6]polytungstates,or three‐dimensional WO3crystals).The strong acid sites were weakened,and the weak and medium acid sites were strengthened when the W loading on Mt‐P was12wt%(12%W/Mt‐P).The12%W/Mt‐P catalyst showed the highest catalytic activity.It gave a glycerol conversion of89.6%and an acrolein selectivity of81.8%at320°C.Coke deposition on the surface of the catalyst led to deactivation.
文摘Taguchi method, largely used to optimize processes controlled by manifold parameters, has been utilized to improve the synthesis of carbon nanotubes by chemical vapor deposition of isobutane. Analyzing results obtained in nine suitably designed reactions, the influence of synthesis （773-973 K）, calcinations （723-1,023 K） and reduction （773-973 K） temperatures and catalyst-support （alumina, magnesia or Na＋-exchanged K10 clay） on specific yield and crystallization degree （i.e., C sp2 content） of the nanotubes has been ranked. After critical examination and adjusting of conditions predicted to give optimal results, -50 g of nanotubes per gram of metal are obtained at 973 K over Fe/alumina catalysts calcined at 723 K and reduced at 773 K. Under the same conditions, highly crystallized nanotubes （with 73% of C sp2 bonds, as qualitatively estimated from Raman spectroscopy）, suitable for electro-catalysis applications, are synthesized over Fe/clay catalysts.
