设计了一种使用超声波信号通信的高温蒸汽灭菌器温度压强测量系统。系统利用超声波信号在刚体介质中的强穿透性穿透灭菌器金属壁。通过40 k Hz与1 MHz两种频率信号代表不同数据位完成信息的传递。系统以STM32F103为控制器,通过外围电路...设计了一种使用超声波信号通信的高温蒸汽灭菌器温度压强测量系统。系统利用超声波信号在刚体介质中的强穿透性穿透灭菌器金属壁。通过40 k Hz与1 MHz两种频率信号代表不同数据位完成信息的传递。系统以STM32F103为控制器,通过外围电路驱动超声波换能器激发超声波,从而使外部换能器振动完成通信。介绍了误码处理算法与系统硬件构成。经测试,系统温度测量误差小于0.1℃,压强测量误差小于0.1%FS。展开更多
Pelletization is one of useful processes for the agglomeration of iron ore or concentrates. However, manganese ore fines are mainly agglomerated by sintering due to its high combined water which adversely affects the ...Pelletization is one of useful processes for the agglomeration of iron ore or concentrates. However, manganese ore fines are mainly agglomerated by sintering due to its high combined water which adversely affects the roasting performance of pellets. In this work, high pressure roll grinding(HPRG) process and optimization of temperature elevation system were investigated to improve the strength of fired manganese ore pellets. It is shown that the manganese ore possesses good ballability after being pretreated by HPRG twice, and good green balls were produced under the conditions of blending 2.0% bentonite in the feed, balling for 7 min at 16.00% moisture. High quality roasted pellets with the compressive strength of 2711 N per pellet were manufactured through preheating at 1050 °C for 10 min and firing at 1335 °C for 15 min by controlling the cracks formation. The fired manganese pellets keep the strength by the solid interconnection of recrystallized pyrolusite grains and the binding of manganite liquid phase which filled the pores and clearance among minerals. The product pellets contain high Mn grade and low impurities, and can be used to smelt ferromanganese, which provides a possible way to use imported manganese ore fines containing high combined water to produce high value ferromanganese.展开更多
A new predictive model for evaluating the vibration of a sawing machine was developed using a new rock classification system. The predictors are machine parameters and a rock sawability index. The new rock classificat...A new predictive model for evaluating the vibration of a sawing machine was developed using a new rock classification system. The predictors are machine parameters and a rock sawability index. The new rock classification system includes four major parameters of the rock： uniaxial compressive strength, abrasiv- ity index, mean MoWs hardness, and Young＇s modulus. The FAHP approach was used when determining the weights of these parameters by six decision makers. Two groups of carbonate rocks were sawn using a fully-instrumented laboratory sawing rig at different feed rates and depths of cut. During the sawing trials system vibration was monitored as a measure of saw performance. Then, a new statistical model was obtained by multiple regression on the machining parameters and the rock sawability index. The model is very useful for the evaluation of the system vibration, and for selecting suitable machining parameters, from a limited set of mechanical properties.展开更多
The adaptive neuro-fuzzy inference systems(ANFIS)are widely used in the concrete technology.In this research,the compressive strength of light weight concrete was determined.To this end,the scoria percentage and curin...The adaptive neuro-fuzzy inference systems(ANFIS)are widely used in the concrete technology.In this research,the compressive strength of light weight concrete was determined.To this end,the scoria percentage and curing day variables were used as the input parameters,and compressive strength and tensile strength were used as the output parameters.In addition,100 patterns were used,70%of which were used for training and 30%were used for testing.To assess the precision of the neuro-fuzzy system,it was compared using two linear regression models.The comparisons were carried out in the training and testing phases.Research results revealed that the neuro-fuzzy systems model offers more potential,flexibility,and precision than the statistical models.展开更多
文摘设计了一种使用超声波信号通信的高温蒸汽灭菌器温度压强测量系统。系统利用超声波信号在刚体介质中的强穿透性穿透灭菌器金属壁。通过40 k Hz与1 MHz两种频率信号代表不同数据位完成信息的传递。系统以STM32F103为控制器,通过外围电路驱动超声波换能器激发超声波,从而使外部换能器振动完成通信。介绍了误码处理算法与系统硬件构成。经测试,系统温度测量误差小于0.1℃,压强测量误差小于0.1%FS。
基金Project(2011GH561685)supported by the China Torch Program
文摘Pelletization is one of useful processes for the agglomeration of iron ore or concentrates. However, manganese ore fines are mainly agglomerated by sintering due to its high combined water which adversely affects the roasting performance of pellets. In this work, high pressure roll grinding(HPRG) process and optimization of temperature elevation system were investigated to improve the strength of fired manganese ore pellets. It is shown that the manganese ore possesses good ballability after being pretreated by HPRG twice, and good green balls were produced under the conditions of blending 2.0% bentonite in the feed, balling for 7 min at 16.00% moisture. High quality roasted pellets with the compressive strength of 2711 N per pellet were manufactured through preheating at 1050 °C for 10 min and firing at 1335 °C for 15 min by controlling the cracks formation. The fired manganese pellets keep the strength by the solid interconnection of recrystallized pyrolusite grains and the binding of manganite liquid phase which filled the pores and clearance among minerals. The product pellets contain high Mn grade and low impurities, and can be used to smelt ferromanganese, which provides a possible way to use imported manganese ore fines containing high combined water to produce high value ferromanganese.
文摘A new predictive model for evaluating the vibration of a sawing machine was developed using a new rock classification system. The predictors are machine parameters and a rock sawability index. The new rock classification system includes four major parameters of the rock： uniaxial compressive strength, abrasiv- ity index, mean MoWs hardness, and Young＇s modulus. The FAHP approach was used when determining the weights of these parameters by six decision makers. Two groups of carbonate rocks were sawn using a fully-instrumented laboratory sawing rig at different feed rates and depths of cut. During the sawing trials system vibration was monitored as a measure of saw performance. Then, a new statistical model was obtained by multiple regression on the machining parameters and the rock sawability index. The model is very useful for the evaluation of the system vibration, and for selecting suitable machining parameters, from a limited set of mechanical properties.
文摘The adaptive neuro-fuzzy inference systems(ANFIS)are widely used in the concrete technology.In this research,the compressive strength of light weight concrete was determined.To this end,the scoria percentage and curing day variables were used as the input parameters,and compressive strength and tensile strength were used as the output parameters.In addition,100 patterns were used,70%of which were used for training and 30%were used for testing.To assess the precision of the neuro-fuzzy system,it was compared using two linear regression models.The comparisons were carried out in the training and testing phases.Research results revealed that the neuro-fuzzy systems model offers more potential,flexibility,and precision than the statistical models.
