Systematic approach to the maintenance of rural road network is a very important issue from the viewpoint of public costs. Most countries developed custom PMS （pavement management systems） based on deterministic or ...Systematic approach to the maintenance of rural road network is a very important issue from the viewpoint of public costs. Most countries developed custom PMS （pavement management systems） based on deterministic or probabilistic approach. The main goal is to ensure safety and continuity of road traffic on road network with low intensity and lower technical requirements. Article presents PMS used for Slovakia rural road network based on road construction diagnostics, traffic volume, climate factors and evaluation of maintenance works economics effectives by using of software tools like HDM-4 developed by World Bank. Local road administrators of rural road networks often lack the software equipment, most PMS, however effective, are often cumbersome, demanding in regard to energy, know-how and software equipment. The majority of local road administrators of rural road networks thus resort to non-effective reactive maintenance strategies. This article describes an easy to use method, based on predetermined maintenance repair and rehabilitation standards. A simple method, based on road user cost, is introduced that administrator can use to prepare a list of road section eligible for repair according to their repair priority.展开更多
The goal of this work is to perform the risks analysis of the mission NANOSATC-BR1 and NANOSATC-BR2 and then compare them linearly. The NANOSATC-BR1 and NANOSATC-BR2 are the first and the second satellite, respectivel...The goal of this work is to perform the risks analysis of the mission NANOSATC-BR1 and NANOSATC-BR2 and then compare them linearly. The NANOSATC-BR1 and NANOSATC-BR2 are the first and the second satellite, respectively. They belonged to the project NANOSATC-BR-development of CubeSats, which is performed in the facilities built by the partnership between the National Institute of Space Research and the Technological Center from Federal University of Santa Maria. The project focuses on the development of a scientific instrumentation and, simultaneously, the design development, construction, qualification and launch of a national scientific nanosatellite, in a cube shape with 100 mm of edge and near to 1.33 kg of mass, per unit （U）. The risk analysis was held to identify and minimize the project＇s risks of failure, due to its complexity, assuring the mission success, preventing extra pays and rework. The software, CubeSat Mission Design Software Tool for Risk Estimating, which uses statistical regression methods, was used. So, we were capable to measure the project＇s most critical steps assuring its success. The NANOSATC-BR1 was launched in June 19 and it is orbiting the Earth in a nominal regime and the NANOSATC-BR2 has been scheduled to be launched in 2016.展开更多
Complementing our previous publications, this paper presents the information schema constructs （ISCs） that underpin the programming of specific system manifestation feature （SMF） orientated information management ...Complementing our previous publications, this paper presents the information schema constructs （ISCs） that underpin the programming of specific system manifestation feature （SMF） orientated information management and composing system models. First, we briefly present （1） the general process of pre-embodiment design with SMFs, （2） the procedures of creating genotypes and phenotypes of SMFs, （3） the specific procedure of instantiation of phenotypes of SMFs, and （4） the procedure of system model management and processing. Then, the chunks of information needed for instantiation of phenotypes of SMFs are discussed, and the ISCs designed for instantiation presented. Afterwards, the information management aspects of system modeling are addressed. Methodologically, system modeling involves （1） placement of phenotypes of SMF in the modeling space, （2） combining them towards the desired architecture and operation, （3） assigning values to the parameters and checking the satisfac- tion of constraints, and （4） storing the system model in the SMFs-based warehouse database. The final objective of the reported research is to develop an SMFs-based toolbox to support modeling of cyber-physical systems （CPSs）.展开更多
文摘Systematic approach to the maintenance of rural road network is a very important issue from the viewpoint of public costs. Most countries developed custom PMS （pavement management systems） based on deterministic or probabilistic approach. The main goal is to ensure safety and continuity of road traffic on road network with low intensity and lower technical requirements. Article presents PMS used for Slovakia rural road network based on road construction diagnostics, traffic volume, climate factors and evaluation of maintenance works economics effectives by using of software tools like HDM-4 developed by World Bank. Local road administrators of rural road networks often lack the software equipment, most PMS, however effective, are often cumbersome, demanding in regard to energy, know-how and software equipment. The majority of local road administrators of rural road networks thus resort to non-effective reactive maintenance strategies. This article describes an easy to use method, based on predetermined maintenance repair and rehabilitation standards. A simple method, based on road user cost, is introduced that administrator can use to prepare a list of road section eligible for repair according to their repair priority.
文摘The goal of this work is to perform the risks analysis of the mission NANOSATC-BR1 and NANOSATC-BR2 and then compare them linearly. The NANOSATC-BR1 and NANOSATC-BR2 are the first and the second satellite, respectively. They belonged to the project NANOSATC-BR-development of CubeSats, which is performed in the facilities built by the partnership between the National Institute of Space Research and the Technological Center from Federal University of Santa Maria. The project focuses on the development of a scientific instrumentation and, simultaneously, the design development, construction, qualification and launch of a national scientific nanosatellite, in a cube shape with 100 mm of edge and near to 1.33 kg of mass, per unit （U）. The risk analysis was held to identify and minimize the project＇s risks of failure, due to its complexity, assuring the mission success, preventing extra pays and rework. The software, CubeSat Mission Design Software Tool for Risk Estimating, which uses statistical regression methods, was used. So, we were capable to measure the project＇s most critical steps assuring its success. The NANOSATC-BR1 was launched in June 19 and it is orbiting the Earth in a nominal regime and the NANOSATC-BR2 has been scheduled to be launched in 2016.
文摘Complementing our previous publications, this paper presents the information schema constructs （ISCs） that underpin the programming of specific system manifestation feature （SMF） orientated information management and composing system models. First, we briefly present （1） the general process of pre-embodiment design with SMFs, （2） the procedures of creating genotypes and phenotypes of SMFs, （3） the specific procedure of instantiation of phenotypes of SMFs, and （4） the procedure of system model management and processing. Then, the chunks of information needed for instantiation of phenotypes of SMFs are discussed, and the ISCs designed for instantiation presented. Afterwards, the information management aspects of system modeling are addressed. Methodologically, system modeling involves （1） placement of phenotypes of SMF in the modeling space, （2） combining them towards the desired architecture and operation, （3） assigning values to the parameters and checking the satisfac- tion of constraints, and （4） storing the system model in the SMFs-based warehouse database. The final objective of the reported research is to develop an SMFs-based toolbox to support modeling of cyber-physical systems （CPSs）.
