期刊文献+
共找到25篇文章
< 1 2 >
每页显示 20 50 100
水泥辊压机预粉磨系统电耗评价探讨 被引量:1
1
作者 侯龙华 柴星腾 贺孝一 《水泥技术》 2017年第5期19-24,共6页
本文简要介绍了水泥粉磨技术的发展现状,详细分析了各种水泥辊压机预粉磨系统的优缺点。针对当前业内热议的水泥粉磨系统电耗指标问题,理论联系实际,提出了水泥辊压机预粉磨系统的电耗评价方法,供粉磨系统项目策划、选型设计、生产管理... 本文简要介绍了水泥粉磨技术的发展现状,详细分析了各种水泥辊压机预粉磨系统的优缺点。针对当前业内热议的水泥粉磨系统电耗指标问题,理论联系实际,提出了水泥辊压机预粉磨系统的电耗评价方法,供粉磨系统项目策划、选型设计、生产管理人员参考。 展开更多
关键词 辊压机 预粉磨 系统电耗
下载PDF
中碳锰铁的系统电耗与回收率
2
作者 傅维贤 《铁合金》 北大核心 1991年第3期31-32,27,共3页
文中指出只考核中锰生产本身的电耗和锰回收率的某些弊端,建议考核系统电耗和系统回收率,并提出相应的计算方法。
关键词 中碳锰铁 系统电耗 回收率
下载PDF
高电耗系统的能效评测及分级新方法 被引量:4
3
作者 马立新 朱润 +1 位作者 周小波 王井 《控制工程》 CSCD 北大核心 2016年第9期1375-1379,共5页
高电耗系统产能落后、能耗超标、电能质量问题突出,亟需进行节能改造。目前虽然有针对高电耗系统的耗能监控系统,但该系统没有能效评测功能。科学的能效评测结果是进行节能改造的基础。提出运用粒子群算法的投影寻踪理论研究能效评测方... 高电耗系统产能落后、能耗超标、电能质量问题突出,亟需进行节能改造。目前虽然有针对高电耗系统的耗能监控系统,但该系统没有能效评测功能。科学的能效评测结果是进行节能改造的基础。提出运用粒子群算法的投影寻踪理论研究能效评测方法,建立基于粒子群算法的投影等级评价模型(Particle Swarm Optimization Projection Pursuit Grade Evaluation Model,PSO-PP),提供量化的节电方案。实例计算结果表明运用该方法能建立新的分级标准,细化节能数据,精确地反映高电耗系统的能效状况,且评测简捷,具有较强的实用价值。 展开更多
关键词 电耗系统 能效评测 粒子群算法 投影寻踪
下载PDF
基于Android手机的智能电耗分析系统 被引量:3
4
作者 唐笑林 孙街亭 +1 位作者 戴洁 刘治群 《阜阳师范学院学报(自然科学版)》 2012年第1期53-58,共6页
剖析了Android应用程序架构,在分析电动力车用户需求的基础上进行了智能电耗分析系统i-erecord设计,探究相关模块的关键技术,实现了基于Android手机平台的智能电耗分析系统,以帮助用户如何驾驶才能节约用电。
关键词 ANDROID手机 智能电耗分析系统 电动力车 i-erecord
下载PDF
基于MODBUS协议的电耗分时计量系统设计与应用研究
5
作者 韩卫华 陈彬 《电脑知识与技术》 2014年第11期7470-7472,共3页
电能消耗是多数工业生产企业主要的成本构成之一,而现阶段的大多数工业生产企业的电能管理仍使用全人工或半自动管理方式,从节能提产和绿色环保等方面来说,已经无法满足企业发展的需要。为了能够更好的帮助企业采集、整理分析电能消耗信... 电能消耗是多数工业生产企业主要的成本构成之一,而现阶段的大多数工业生产企业的电能管理仍使用全人工或半自动管理方式,从节能提产和绿色环保等方面来说,已经无法满足企业发展的需要。为了能够更好的帮助企业采集、整理分析电能消耗信息,发现电能消耗成本过程中存在的问题和风险,并给出专业化改善建议,该文在研究MODBUSRTU通讯协议的基础上,研发设计了一个基于MODBUS-RTU通讯协议的电耗分时计量系统,该系统通过在水泥生产企业的测试运行,实现了对水泥生产企业电能消耗数据的实时、动态监管,对企业生产运行策略提供科学合理的支持,从而达到了提高生产效率,规避企业运营的成本风险的目的。 展开更多
关键词 MODBUS协议 电耗分时计量系统 电能消耗
下载PDF
用于电耗自动检测系统的传感器
6
作者 李绍贵 《节能》 北大核心 1989年第7期44-45,共2页
在工业企业中为节省电能,要求对每个用电设备(机床、机组、流水线等)在短时间间隔内(一个工作班、一昼夜等)的消耗进行检测。为此每个用电设备必须装备简单、可靠、经济的检测装置,并能与电子计算机连接。以感应计数器为基础的电能消耗... 在工业企业中为节省电能,要求对每个用电设备(机床、机组、流水线等)在短时间间隔内(一个工作班、一昼夜等)的消耗进行检测。为此每个用电设备必须装备简单、可靠、经济的检测装置,并能与电子计算机连接。以感应计数器为基础的电能消耗检测装置有很多缺点:误差与频率有直接的依赖关系, 展开更多
关键词 传感器 电耗检测系统
下载PDF
水泥辊压机终粉磨系统的工业化应用 被引量:1
7
作者 何毛 李洪生 +2 位作者 马健 王小峰 杜鑫 《水泥技术》 2020年第2期17-20,共4页
介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。
关键词 辊压机 终粉磨 系统电耗 水泥性能 混凝土性能
下载PDF
辊压机生料终粉磨系统选粉机优化改进
8
作者 倪欣 《中国水泥》 CAS 2022年第7期92-94,共3页
该公司5000t/d预分解窑熟料生产线,生料制备配置一套RP200-180辊压机终粉磨系统。运行初期,由于动态选粉机选粉效率低,不但生料产量偏低,系统粉磨电耗在13kWh/t左右,而且生料R_(200μm)粗颗粒筛余偏粗,在3.5%~5.0%之间,严重影响熟料煅... 该公司5000t/d预分解窑熟料生产线,生料制备配置一套RP200-180辊压机终粉磨系统。运行初期,由于动态选粉机选粉效率低,不但生料产量偏低,系统粉磨电耗在13kWh/t左右,而且生料R_(200μm)粗颗粒筛余偏粗,在3.5%~5.0%之间,严重影响熟料煅烧质量。经分析认为,该终粉磨系统中动态选粉机存在一定技术问题,采取针对性调整措施,通过有效增大选粉室分级区,并对密封迷宫间隙进行处理后,系统产量由460t/h提高至500t/h,粉磨电耗降至11kWh/t。同时,生料R_(200μm)粗颗粒筛余量降至1.5%,取得增产、节电,降低生料细度的综合技术经济效果。 展开更多
关键词 辊压机 生料终粉磨 选粉机分级效率 粉磨系统电耗
下载PDF
泵站目标电耗节能技术在哈尔滨第三水厂的应用
9
作者 姚泊生 宋铁男 陈运珍 《变频器世界》 2005年第1期121-122,91,共3页
本文应用泵站目标电耗节能技术准确确定泵站的节电潜力,并实现对泵站进行量化节能控制,并给出了该项技术在哈尔滨第三水厂一个应用实例。
关键词 哈尔滨第三水厂 泵站 目标电耗节能技术 目标电耗控制系统 变频器
下载PDF
工业企业用电单耗分析系统的设计与实现
10
作者 何林太 《供用电》 1991年第2期29-31,共3页
关键词 工业企业 用电单耗 电耗分析系统
下载PDF
碳中和背景下成都某医院能耗分析与电气减碳路径探讨 被引量:1
11
作者 周翔 《建筑电气》 2023年第7期4-9,共6页
医疗建筑是建筑领域的用能大户,实现医疗建筑的节能降耗,降低碳排放,是建筑行业整体实现碳中和的重要环节。通过对成都地区某医院能耗组成和节能前景的分析,提出医院实现碳中和的目标,需要以设计、运维可再生能源利用为减碳路径,将“零... 医疗建筑是建筑领域的用能大户,实现医疗建筑的节能降耗,降低碳排放,是建筑行业整体实现碳中和的重要环节。通过对成都地区某医院能耗组成和节能前景的分析,提出医院实现碳中和的目标,需要以设计、运维可再生能源利用为减碳路径,将“零碳”理念融入到医院的建设和全生命周期运维过程中,实现医院绿色、低碳、可持续发展。 展开更多
关键词 碳中和 人均综合能耗 单位建筑面积能耗 常规用能系统单位建筑面积电耗 建筑电气化 碳排放 可再生能源利用 运维管理
下载PDF
1000MW超临界锅炉氧量控制及配风优化 被引量:3
12
作者 伍日胜 李贺 +1 位作者 杨飞龙 靳立维 《云南电力技术》 2014年第5期81-83,共3页
介绍了某厂2×1 000 MW超超临界机组投产后通过对传统的氧量控制及二次配风方式进行优化,大幅度降低了炉膛出口NOx排放量和风烟系统电耗。同时,还将试验所得的优化参数以函数曲线的形式应用于DCS中,实现了锅炉配风的精细化控制。
关键词 配风方式 NOX排放 风烟系统电耗 精细化控制
下载PDF
Novel grey forecast model and its application 被引量:1
13
作者 丁洪发 舒双焰 段献忠 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2003年第3期315-320,共6页
The advancement of grey system theory provides an effective analytic tool for power system load fore-cast. All kinds of presently available grey forecast models can be well used to deal with the short-term load fore-c... The advancement of grey system theory provides an effective analytic tool for power system load fore-cast. All kinds of presently available grey forecast models can be well used to deal with the short-term load fore-cast. However, they make big errors for medium or long-term load forecasts, and the load that does not satisfythe approximate exponential increasing law in particular. A novel grey forecast model that is capable of distin-guishing the increasing law of load is adopted to forecast electric power consumption (EPC) of Shanghai. Theresults show that this model can be used to greatly improve the forecast precision of EPC for a secondary industryor the whole society. 展开更多
关键词 grey model load forecast electric power consumption
下载PDF
Daily Operation Optimization of a Residential Molten Carbonate Fuel Cell Power System Using Genetic Algorithm 被引量:1
14
作者 李勇 曹广益 余晴春 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2006年第3期349-356,共8页
To decrease the cost of electricity generation of a residential molten carbonate fuel cell (MCFC) power system, multi-crossover genetic algorithm (MCGA), which is based on "multi-crossover" and "usefulness-base... To decrease the cost of electricity generation of a residential molten carbonate fuel cell (MCFC) power system, multi-crossover genetic algorithm (MCGA), which is based on "multi-crossover" and "usefulness-based selection rule", is presented to minimize the daily fuel consumption of an experimental 10kW MCFC power system for residential application. Under the operating conditions obtained by MCGA, the operation constraints are satisfied and fuel consumption is minimized. Simulation and experimental results indicate that MCGA is efficient for the operation optimization of MCFC power systems. 展开更多
关键词 molten carbonate fuel cell power system fuel consumption operation optimization multi-crossover residential fuel cell genetic algorithm
下载PDF
Zero steady-states electrical energy consumption clutch system
15
作者 Szumanowski Antoni Liu Zhiyin Hajduga Arkadiusz 《High Technology Letters》 EI CAS 2010年第1期58-62,共5页
A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet co... A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies. 展开更多
关键词 CLUTCH hybrid powertrain system dual diaphragm spring
下载PDF
Effect of Market Power in Electricity Markets
16
作者 马歆 侯志俭 +1 位作者 蒋传文 刘涌 《Journal of Donghua University(English Edition)》 EI CAS 2003年第4期137-140,共4页
The main objective of this paper is to show an overview analysis of market power issues.Market power reflects the scarcity of power supply.It is the ability of a particular seller or group of sellers to maintain price... The main objective of this paper is to show an overview analysis of market power issues.Market power reflects the scarcity of power supply.It is the ability of a particular seller or group of sellers to maintain prices profitably above competitive levels for a significant period of time.Because the electric power system has its own characteristics that are different to other economic systems,both physical factors and economic factors of power system are key elements on this definition.We study some cases here,including different line limit levels,load levels and bid strategy through a market model based on OPF (optimal power flow) with a decommitment algorithm. 展开更多
关键词 Electricity market Market power analysis OPF market model
下载PDF
Power loss reduction of distribution systems using BFO based optimal reconfiguration along with DG and shunt capacitor placement simultaneously in fuzzy framework 被引量:1
17
作者 M.Mohammadi A.Mohammadi Rozbahani S.Bahmanyar 《Journal of Central South University》 SCIE EI CAS CSCD 2017年第1期90-103,共14页
In distribution systems,network reconfiguration and capacitor placement are commonly used to diminish power losses and keep voltage profiles within acceptable limits.Moreover,the problem of DG allocation and sizing is... In distribution systems,network reconfiguration and capacitor placement are commonly used to diminish power losses and keep voltage profiles within acceptable limits.Moreover,the problem of DG allocation and sizing is great important.In this work,a combination of a fuzzy multi-objective approach and bacterial foraging optimization(BFO) as a meta-heuristic algorithm is used to solve the simultaneous reconfiguration and optimal sizing of DGs and shunt capacitors in a distribution system.Each objective is transferred into fuzzy domain using its membership function.Then,the overall fuzzy satisfaction function is formed and considered a fitness function inasmuch as the value of this function has to be maximized to gain the optimal solution.The numerical results show that the presented algorithm improves the performance much more than other meta-heuristic algorithms.Simulation results found that simultaneous reconfiguration with DG and shunt capacitors allocation(case 5) has 77.41%,42.15%,and 56.14%improvements in power loss reduction,load balancing,and voltage profile indices,respectively in 33-bus test system.This result found 87.27%,35.82%,and 54.34%improvements of mentioned indices respectively for 69-bus system. 展开更多
关键词 network reconfiguration distributed generation (DG) capacitor banks fuzzy framework bacterial foragingoptimization
下载PDF
Implementation of Spreadsheet Modeling to Compare the Annual Energy Performance and Cost of Microgeneration Systems
18
作者 Andrew Putrayudha Soesanto Evgueniy Entchev +1 位作者 Eun Chul Kang Euy Joon Lee 《Journal of Energy and Power Engineering》 2014年第5期826-835,共10页
This paper presents the investigation of energy and cost saving of microgeneration systems which consist of conventional, load sharing, renewable energy and hybrid-renewable energy systems application featuring single... This paper presents the investigation of energy and cost saving of microgeneration systems which consist of conventional, load sharing, renewable energy and hybrid-renewable energy systems application featuring single detached house and office buildings by implementing spreadsheet modeling. Microsoft excel is employed as the spreadsheet application in this study. The system performance of each case is calculated under typical weather of ottawa, canada. These cases are calculated and analyzed in terms of thermal/cooling load (building demand) and natural gas/electricity consumption (energy supply) as well as the financial part by involving several parameters which are initial cost, annual energy consumption cost, annual operational and maintenance cost, inflation rate, and return on investment. Moreover, a house and an office have the same geometry of 200 mE. Total of seven cases modeling are developed; Case-1- a house with boiler and chiller, Case-2- an office with boiler and chiller, Case-3-a simple sum of Case l and Case 2, Case-4- a load-sharing model, Case-5- a load-sharing with GSHP (ground source heat pump), Case-6- a load-sharing with ground source heat pump-fuel cell hybrid system (FC-GSHP)and Case-7- a load-sharing with GSHP--photovoltaic hybrid system (PVT-GSHP). As the results, it will be observed the efficiency of the load-sharing, renewable energy, hybrid-renewable energy implementation comparing to the conventional system. 展开更多
关键词 SPREADSHEET GSHP FC PVT microgeneration.
下载PDF
Modern Electrical Power Source on New System of Dissipation and Renewable Energies Sources
19
作者 Zygmunt Szymanski 《Computer Technology and Application》 2014年第1期7-14,共8页
This paper presents some solutions of modem renewable energy system applied actually in dissipation energy source: wind turbine, solar panel battery charge, SSS (support set system), and standby diesel generator co... This paper presents some solutions of modem renewable energy system applied actually in dissipation energy source: wind turbine, solar panel battery charge, SSS (support set system), and standby diesel generator cooperated in series, parallel and hybrid system with main energy system. Its solution enable obtain independent individual energy source in different work exploitations. One of problems concerned with alternative energy source is changes of output voltages and output power dependence of climatic conditions. Possible solution is application of decoupled adjustable speed generation system in renewable energy generation. The decoupled generation system consists of: alternative energy source, internal combustion engine drives permanent magnet generator and DC/AC, or AC/AC converter. Performance of single decoupled generation set is discussed supported by results of laboratory tests. To provide high quality voltage is applied an additional energy storage, made from super capacitor and bidirectional DC/DC convert. Such system performs very stiff voltage in any load condition. Integration of solar battery panels or renewable wind energy system is provided via DC link of the variable speed decoupled autonomous generation system. Results of computer simulation and laboratory experiments are presented in the paper. 展开更多
关键词 Power source renewable energy dissipation.
下载PDF
Performance Analysis of Two Frequency Reuse Schemes in Fixed Relay Systems
20
作者 黄磊 戎蒙恬 《Journal of Shanghai Jiaotong university(Science)》 EI 2007年第2期216-222,共7页
An upsurge of interest in relay-augmented infrastructure-based networks has appeared in recent years.Radio resource management in such relay systems has great influence on the system performance.How to utilize the lim... An upsurge of interest in relay-augmented infrastructure-based networks has appeared in recent years.Radio resource management in such relay systems has great influence on the system performance.How to utilize the limited frequency resources efficiently in the system is a hot research topic.In this paper,performance of frequency reuse schemes has been studied in fixed relay systems.A novel scheme is achieved by modifying an existing one.Theoretical model is proposed for the performance analysis of two schemes.Both the theoretical analysis and simulation results show that the modified scheme outperforms the existing one not only in power consumption of mobile stations but also in cell carrier-to-interference ratio coverage. 展开更多
关键词 frequency reuse fixed relay system power consumption carrier-to-interference ratio
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部