Seismic exploration in the mountainous areas of western Chinese is extremely difficult because of the complexity of the surface and subsurface, which results in shooting difficulties, seismic data with low signal-to-n...Seismic exploration in the mountainous areas of western Chinese is extremely difficult because of the complexity of the surface and subsurface, which results in shooting difficulties, seismic data with low signal-to-noise ratio, and strong interference. The complexity of the subsurface structure leads to strong scattering of the refl ection points; thus, the curved-line acquisition method has been used. However, the actual subsurface structural characteristics have been rarely considered. We propose a design method for irregular acquisition based on common refl ection points（CRP） to avoid difficult-to-shoot areas, while considering the structural characteristics and CRP positions and optimizing the surfacereceiving line position. We arrange the positions of the receiving points to ensure as little dispersion of subsurface CRP as possible to improve the signal-to-noise ratio of the seismic data. We verify the applicability of the method using actual data from a site in Sichuan Basin. The proposed method apparently solves the problem of seismic data acquisition and facilitates seismic exploration in structurally complex areas.展开更多
Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the opti...Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the optimal number of receiving traces in field geometry using a numerical simulation based on a field test conducted in previous research （Zhu et al., 2011）. A mathematical model is established for total energy and average efficiency energy using fixed trace spacing and optimal receiving traces are estimated. Seismic data acquired in a complex work area are used to verify the correctness of the proposed method. Results of model data calculations and actual data processing show that results are in agreement. This indicates that the proposed method is reasonable, correct, sufficiently scientific, and can be regarded as a novel method for use in seismic geometry design in complex geological regions.展开更多
When an oceanographic vessel is sailing, the currents near the surface of ship hull are rapid, making it hard to meet the environmental requirements of scientific observation equipment. To guarantee the installation s...When an oceanographic vessel is sailing, the currents near the surface of ship hull are rapid, making it hard to meet the environmental requirements of scientific observation equipment. To guarantee the installation space and environmental requirements of the observation equipment, the drop keel system was proposed for the first time for ocean-graphic ships at China, to avoid the traditional ＂rudder-shaft＂ type fin keel＇s disadvantage. The research study will examine the operational mechanism and functions of the drop keel system, the operating conditions of the fin keel to determine the driver method and its arrangement, and the locking method of the fin keel underwater. The research wilI also provide some general designs for analyzing the best plan for the drop keel system.展开更多
In this paper, a mathematic description of a class of uncertain nonlinear large scale systems based on some practical application is given. A designing method to construct observers for su...In this paper, a mathematic description of a class of uncertain nonlinear large scale systems based on some practical application is given. A designing method to construct observers for such kind of nonlinear composite systems is developed. The unknown parameters and disturbances are assumed to be neither linear nor matched. A numerical example is used to illustrate the efficiency of our results.展开更多
This paper is concerned with the problem of observer-based fuzzy control design for discrete-time T-S fuzzy bilinear stochastic systems with infinite-distributed delays. Based on the piecewise quadratic Lyapunov funct...This paper is concerned with the problem of observer-based fuzzy control design for discrete-time T-S fuzzy bilinear stochastic systems with infinite-distributed delays. Based on the piecewise quadratic Lyapunov functional （PQLF）, the fuzzy observer-basedcontrollers are designed for T-S fuzzy bilinear stochastic systems. It is shown that the stability in the mean square for discrete T-S fuzzy bilinear stochastic systems can be established if there exists a set of PQLF can be constructed and the fuzzy observer-based controller can be obtained by solving a set of nonlinear minimization problem involving linear matrix inequalities （LMIs） constraints. An iterative algorithm making use of sequential linear programming matrix method （SLPMM） to derive a single-step LMI condition for fuzzy observer-based control design. Finally, an illustrative example is provided to demonstrate the effectiveness of the results proposed in this paper.展开更多
A discrete observer-based repetitive control(RC) design method for a linear system with uncertainties was presented based on two-dimensional(2D) system theory. Firstly, a 2D discrete model was established to describe ...A discrete observer-based repetitive control(RC) design method for a linear system with uncertainties was presented based on two-dimensional(2D) system theory. Firstly, a 2D discrete model was established to describe both the control behavior within a repetition period and the learning process taking place between periods. Next, by converting the designing problem of repetitive controller into one of the feedback gains of reconstructed variables, the stable condition was obtained through linear matrix inequality(LMI) and also the gain coefficient of repetitive system. Numerical simulation shows an exceptional feasibility of this proposal with remarkable robustness and tracking speed.展开更多
This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most ...This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most widely used motors in electrical appliances, industrial control and automation. However, it is also known that induction motor control is a complex task that is due to its nonlinear characteristics. Two main features of the proposed approach are worth to be mentioned. Firstly, a nonlinear control is carried out using a nonlinear feedback linearization technique involving non available state variable measurements of the induction motor system. Secondly, a nonlinear observer is designed to estimate these pertinent but unmeasurable state variables of the machine. The circle-criterion approach is performed to compute the observer gain matrices as a solution of LMI （linear matrix inequalities） that ensure the stability conditions, in the sense of Lyapunov, of the estimated state error dynamics of the designed observer. Simulation results are presented to validate the effectiveness of the proposed approach.展开更多
基金funded by The National Natural Science Foundation of China(No.41304115)Sichuan Province innovative team of natural gas geology Construction Program(No.13TD0024)Fund for middle-aged core teachers of SWPU
文摘Seismic exploration in the mountainous areas of western Chinese is extremely difficult because of the complexity of the surface and subsurface, which results in shooting difficulties, seismic data with low signal-to-noise ratio, and strong interference. The complexity of the subsurface structure leads to strong scattering of the refl ection points; thus, the curved-line acquisition method has been used. However, the actual subsurface structural characteristics have been rarely considered. We propose a design method for irregular acquisition based on common refl ection points（CRP） to avoid difficult-to-shoot areas, while considering the structural characteristics and CRP positions and optimizing the surfacereceiving line position. We arrange the positions of the receiving points to ensure as little dispersion of subsurface CRP as possible to improve the signal-to-noise ratio of the seismic data. We verify the applicability of the method using actual data from a site in Sichuan Basin. The proposed method apparently solves the problem of seismic data acquisition and facilitates seismic exploration in structurally complex areas.
基金supported by the National Natural Science Foundation of China(No.41304115)National Key S&T Special Projects(No.2016ZX050 24001-003)+2 种基金Open Fund for Sichuan Province Key Laboratory of Natural Gas Geology(No.2015trqdz02)the Research Project,CNPC(No.2016A-33)"Young and Middle-aged Key Teachers"Training Program in Southwest Petroleum University
文摘Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the optimal number of receiving traces in field geometry using a numerical simulation based on a field test conducted in previous research （Zhu et al., 2011）. A mathematical model is established for total energy and average efficiency energy using fixed trace spacing and optimal receiving traces are estimated. Seismic data acquired in a complex work area are used to verify the correctness of the proposed method. Results of model data calculations and actual data processing show that results are in agreement. This indicates that the proposed method is reasonable, correct, sufficiently scientific, and can be regarded as a novel method for use in seismic geometry design in complex geological regions.
文摘When an oceanographic vessel is sailing, the currents near the surface of ship hull are rapid, making it hard to meet the environmental requirements of scientific observation equipment. To guarantee the installation space and environmental requirements of the observation equipment, the drop keel system was proposed for the first time for ocean-graphic ships at China, to avoid the traditional ＂rudder-shaft＂ type fin keel＇s disadvantage. The research study will examine the operational mechanism and functions of the drop keel system, the operating conditions of the fin keel to determine the driver method and its arrangement, and the locking method of the fin keel underwater. The research wilI also provide some general designs for analyzing the best plan for the drop keel system.
文摘In this paper, a mathematic description of a class of uncertain nonlinear large scale systems based on some practical application is given. A designing method to construct observers for such kind of nonlinear composite systems is developed. The unknown parameters and disturbances are assumed to be neither linear nor matched. A numerical example is used to illustrate the efficiency of our results.
文摘This paper is concerned with the problem of observer-based fuzzy control design for discrete-time T-S fuzzy bilinear stochastic systems with infinite-distributed delays. Based on the piecewise quadratic Lyapunov functional （PQLF）, the fuzzy observer-basedcontrollers are designed for T-S fuzzy bilinear stochastic systems. It is shown that the stability in the mean square for discrete T-S fuzzy bilinear stochastic systems can be established if there exists a set of PQLF can be constructed and the fuzzy observer-based controller can be obtained by solving a set of nonlinear minimization problem involving linear matrix inequalities （LMIs） constraints. An iterative algorithm making use of sequential linear programming matrix method （SLPMM） to derive a single-step LMI condition for fuzzy observer-based control design. Finally, an illustrative example is provided to demonstrate the effectiveness of the results proposed in this paper.
基金Project(61104072) supported by the National Natural Science Foundation of China
文摘A discrete observer-based repetitive control(RC) design method for a linear system with uncertainties was presented based on two-dimensional(2D) system theory. Firstly, a 2D discrete model was established to describe both the control behavior within a repetition period and the learning process taking place between periods. Next, by converting the designing problem of repetitive controller into one of the feedback gains of reconstructed variables, the stable condition was obtained through linear matrix inequality(LMI) and also the gain coefficient of repetitive system. Numerical simulation shows an exceptional feasibility of this proposal with remarkable robustness and tracking speed.
文摘This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most widely used motors in electrical appliances, industrial control and automation. However, it is also known that induction motor control is a complex task that is due to its nonlinear characteristics. Two main features of the proposed approach are worth to be mentioned. Firstly, a nonlinear control is carried out using a nonlinear feedback linearization technique involving non available state variable measurements of the induction motor system. Secondly, a nonlinear observer is designed to estimate these pertinent but unmeasurable state variables of the machine. The circle-criterion approach is performed to compute the observer gain matrices as a solution of LMI （linear matrix inequalities） that ensure the stability conditions, in the sense of Lyapunov, of the estimated state error dynamics of the designed observer. Simulation results are presented to validate the effectiveness of the proposed approach.
