Thermal performance was the most important factor in the development of borehole heat exchanger utilizing geothermal energy. The thermal performance was affected by many different design parameters, such as configurat...Thermal performance was the most important factor in the development of borehole heat exchanger utilizing geothermal energy. The thermal performance was affected by many different design parameters, such as configuration type and borehole size of geothermal heat exchanger. These eventually determined the operation and cost efficiency of the geothermal heat exchanger system. The main purpose of this work was to assess the thermal performance of geother^nal heat exchanger with variation of borehole sizes and numbers of U-tubes inside a borehole. For this, a thermal response test rig was established with line-source theory. The thermal response test was performed with in-line variable input heat source. Effective thermal conductivity and thermal resistance were obtained from the measured data. From the measurement, the effective thermal conductivity is found to have similar values for two- pair type （4 U-tubes） and three-pair type （6 U-tubes） borehole heat exchanger systems indicating similar heat transfer ability. Meanwhile, the thermal resistance shows lower value for the three-pair type compared to the two-pair type. Measured data based resistance have lower value compared to computed result from design programs. Overall comparison finds better thermal performance for the three-pair type, however, fluctuating temperature variation indicates complex flow behavior inside the borehole and requires further study on flow characteristics.展开更多
As the traditional RISC+ASIC/ASSP approach for network processor design can not meet the today’s requirements, this paper described an alternate approach, Reconfigurable Processing Architecture, to boost the performa...As the traditional RISC+ASIC/ASSP approach for network processor design can not meet the today’s requirements, this paper described an alternate approach, Reconfigurable Processing Architecture, to boost the performance to ASIC level while reserve the programmability of the traditional RISC based system. This paper covers both the hardware architecture and the software development environment architecture.展开更多
Pneumatic driven system is widely used in industrial automation, mainly for relatively simple tasks with open-loop control. Because of the pneumatic system’s compressibility and few stop positions, it was considered ...Pneumatic driven system is widely used in industrial automation, mainly for relatively simple tasks with open-loop control. Because of the pneumatic system’s compressibility and few stop positions, it was considered hard to control in a precise motion control system. With the help of newly developed pneumatic servo control technology, using servo-pneumatic positioning controller now is just as easy as using electro-servo system. This article discusses Web-based servo-pneumatic manipulator control and object recognition and positioning. The authors built a three-degrees-of-freedom (3 DOF) pneumatic manipulator with a servo-pneumatic closed-loop control system and machine vision system in their lab. Web-based tele-operation was a basic ability in this experimental system. After installing a CCD camera, video capture card, and related software developed by the authors, the robot could recognize the user specified object through the Web page and find its position. The remote user could command the robot to move to the position and to grab the object. The critical issues of Web-based control are to integrate hybrid open-architecture mechatronic system through the Web and develop a software language environment characterized by the script. The authors’ experiment showed that pneumatic devices could serve as accurate position control and be controlled through the Web.展开更多
A self-reconfigurable robot is a non-linear complex system composed of a large number of modules. The complexity caused by non-linearity makes it difficult to solve the problem of module motion planning and shape-chan...A self-reconfigurable robot is a non-linear complex system composed of a large number of modules. The complexity caused by non-linearity makes it difficult to solve the problem of module motion planning and shape-changing control with the traditional algorithm. In this paper, a full-discrete metamorphic algorithm is proposed. The modules concurrently process the local sensing information, update their eigenvector, and act by the same predetermined logical rules. Then a reasonable motion sequence for modules and the global metamorphosis can be obtained. Therefore, the complexity of metamorphic algorithm is reduced, the metamorphic procedure is simplified, and the self-organizing metamorphosis can be obtained. The algorithm cases of several typical systems are studied and evaluated through simulation program of 2-D planar homogeneous modular systems.展开更多
This paper analyzes of the bottleneck to influence the running efficiency of educational administration system in universities and colleges,and from the system deployment architecture, server configuration, database S...This paper analyzes of the bottleneck to influence the running efficiency of educational administration system in universities and colleges,and from the system deployment architecture, server configuration, database SQL statement optimization and other aspects, it puts forwards the optimization scheme.展开更多
In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum siz...In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum sizing of STATCOM is managed using the genetic algorithm. The average model can account for the high-frequency effects and power electronic losses, and more accurately predict the active and reactive power outputs of the STATCOM. This paper employs the DIgSILENT simulator and DPL （DIgSILENT programming language） as a programming tool of the DIgSILENT to show the validity of the proposed method. The effectiveness of suggested approach has been tested on part of the distribution network of Iran, Khoramdarreh city in Zanjan province.展开更多
Energy storage plays an increasingly important role in modem power systems. It can add value to power systems in various aspects. This paper discusses possible energy storage system （ESS） applications and their bene...Energy storage plays an increasingly important role in modem power systems. It can add value to power systems in various aspects. This paper discusses possible energy storage system （ESS） applications and their benefits to power systems. The system configuration, converter design, and recent field installations of an LV converter based ESS are presented.展开更多
基金Project financially supported by the Second Stage of Brain Korea 21 Projects and Changwon National University,Korea
文摘Thermal performance was the most important factor in the development of borehole heat exchanger utilizing geothermal energy. The thermal performance was affected by many different design parameters, such as configuration type and borehole size of geothermal heat exchanger. These eventually determined the operation and cost efficiency of the geothermal heat exchanger system. The main purpose of this work was to assess the thermal performance of geother^nal heat exchanger with variation of borehole sizes and numbers of U-tubes inside a borehole. For this, a thermal response test rig was established with line-source theory. The thermal response test was performed with in-line variable input heat source. Effective thermal conductivity and thermal resistance were obtained from the measured data. From the measurement, the effective thermal conductivity is found to have similar values for two- pair type （4 U-tubes） and three-pair type （6 U-tubes） borehole heat exchanger systems indicating similar heat transfer ability. Meanwhile, the thermal resistance shows lower value for the three-pair type compared to the two-pair type. Measured data based resistance have lower value compared to computed result from design programs. Overall comparison finds better thermal performance for the three-pair type, however, fluctuating temperature variation indicates complex flow behavior inside the borehole and requires further study on flow characteristics.
文摘As the traditional RISC+ASIC/ASSP approach for network processor design can not meet the today’s requirements, this paper described an alternate approach, Reconfigurable Processing Architecture, to boost the performance to ASIC level while reserve the programmability of the traditional RISC based system. This paper covers both the hardware architecture and the software development environment architecture.
基金Project (No. ZD0107) supported by Natural Science Foundation of Zhejiang Province, China
文摘Pneumatic driven system is widely used in industrial automation, mainly for relatively simple tasks with open-loop control. Because of the pneumatic system’s compressibility and few stop positions, it was considered hard to control in a precise motion control system. With the help of newly developed pneumatic servo control technology, using servo-pneumatic positioning controller now is just as easy as using electro-servo system. This article discusses Web-based servo-pneumatic manipulator control and object recognition and positioning. The authors built a three-degrees-of-freedom (3 DOF) pneumatic manipulator with a servo-pneumatic closed-loop control system and machine vision system in their lab. Web-based tele-operation was a basic ability in this experimental system. After installing a CCD camera, video capture card, and related software developed by the authors, the robot could recognize the user specified object through the Web page and find its position. The remote user could command the robot to move to the position and to grab the object. The critical issues of Web-based control are to integrate hybrid open-architecture mechatronic system through the Web and develop a software language environment characterized by the script. The authors’ experiment showed that pneumatic devices could serve as accurate position control and be controlled through the Web.
文摘A self-reconfigurable robot is a non-linear complex system composed of a large number of modules. The complexity caused by non-linearity makes it difficult to solve the problem of module motion planning and shape-changing control with the traditional algorithm. In this paper, a full-discrete metamorphic algorithm is proposed. The modules concurrently process the local sensing information, update their eigenvector, and act by the same predetermined logical rules. Then a reasonable motion sequence for modules and the global metamorphosis can be obtained. Therefore, the complexity of metamorphic algorithm is reduced, the metamorphic procedure is simplified, and the self-organizing metamorphosis can be obtained. The algorithm cases of several typical systems are studied and evaluated through simulation program of 2-D planar homogeneous modular systems.
基金Acknowledgement Research of the nature science foundation of Shandong province has a triangular surface modeling and control display representation（No. ZR2012FL05）
文摘This paper analyzes of the bottleneck to influence the running efficiency of educational administration system in universities and colleges,and from the system deployment architecture, server configuration, database SQL statement optimization and other aspects, it puts forwards the optimization scheme.
文摘In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum sizing of STATCOM is managed using the genetic algorithm. The average model can account for the high-frequency effects and power electronic losses, and more accurately predict the active and reactive power outputs of the STATCOM. This paper employs the DIgSILENT simulator and DPL （DIgSILENT programming language） as a programming tool of the DIgSILENT to show the validity of the proposed method. The effectiveness of suggested approach has been tested on part of the distribution network of Iran, Khoramdarreh city in Zanjan province.
文摘Energy storage plays an increasingly important role in modem power systems. It can add value to power systems in various aspects. This paper discusses possible energy storage system （ESS） applications and their benefits to power systems. The system configuration, converter design, and recent field installations of an LV converter based ESS are presented.
