Comparison on the Tolerance of Cruciferous Crops and Leguminous Crops to Microcystin

[Objective] To study the differences in the tolerance of leguminous crops and cruciferous crops to microcystin （MC）. [Methed] The cruciferous typical crops oilseed rapes, pakchois, cabbages and leguminous typical crops soybeans, peas and broad beans were selected as the materials to test the effects of MC of differ- ent concentrations on the germination, growth and development of leguminous crops and cruciferous crops. The measurement indicators included germination rate, plant height, chlorophyll, etc. [Result] The MC had great effects on the oilseed rape and pakchois of cruciferous crops, and smaller effects on cabbage, while the leguminous crops were generally not affected. [Conclusion] Leguminous crops are more tolerant to MC than cruciferous crops and more preferential in MC polluted regions.

Determining Topographic Shielding from Digital Elevation Models for Cosmogenic Nuclide Analysis:a GIS Approach and Field Validation

Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.

Vibration Analysis for the Comfort Assessment of Superyachts

Comfort levels on modern superyachts have recently been the object of specific attention of the most important Classification Societies, which issued new rules and regulations for evaluating noise and vibration maximum levels. These rules are named "Comfort Class Rules" and set the general criteria for noise and vibration measurements in different vessels' areas, as well as the maximum noise and vibration limit values. As far as the vibration assessment is concerned, the Comfort Class Rules follow either the ISO 6954:1984 standard or the ISO 6954:2000. After an introduction to these relevant standards, the authors herein present a procedure developed to predict the vibration levels on ships. This procedure builds on finite element linear dynamic analysis and is applied to predict the vibration levels on a 60 m superyacht considered as a case study. The results of the numerical simulations are then benchmarked against experimental data acquired during the sea trial of the vessel. This analysis also allows the authors to evaluate the global damping ratio to be used by designers in the vibration analysis of superyachts.

Human Settlement Analysis Based on Multi-temporal Remote Sensing Data： A Case Study of Xuzhou City, China

To evaluate urban human settlement, we propose a human settlement environment development index(HSEDI) model by choosing vegetation coverage, land surface temperature, impervious surfaces, slope, wetness, and water condition as the evaluation factors. We applied the proposed model to Xuzhou City, Jiangsu Province, China. Landsat-5 Thematic Mapper(TM) images from 1998 to 2010 and digital elevation model(DEM) data with a 30-m resolution were used to calculate the values of the six evaluation factors. The HSEDI value in Xuzhou City was found to be between 2.24 and 8.10 from 1998 to 2010, and it was further divided into five levels, uninhabitable, moderately uninhabitable, generally inhabitable, moderately inhabitable, and inhabitable. The best HSEDI value was in 2007. The generally inhabitable region was about 100.98 km^2, covering 30.87% of the total area in 2007; the moderately inhabitable region was about 170.58 km2 covering 52.15% of the total area; the inhabitable region was about 32.03 km^2, covering 9.79% of the total area; the percentage of the uninhabitable region was zero; and that of the moderately uninhabitable region was very small, less than 1.00%. Moreover, we analyzed the habitability in the respect of spatial patterns and change detection. Results show that the degraded regions of habitability quality are mainly located in the urban fringe and the improved regions are mainly located in the main urban and rural areas. Reason for the degraded habitability quality is the rapid progress of urbanization. However, the increase in urban green spaces and the construction of the main urban area promoted the improved habitability quality. Besides, we further analyzed socio-economic and socio-demographic data to confirm the results of the habitability analysis. The results indicate that the human settlement in Xuzhou City is in a satisfactory condition, but some efforts should be made to control the possible uninhabitable and moderately uninhabitable regions, and to improve the quality of the generally inhabitable regions.

Analysis of Three-dimensional Crack Propagation by Using Displacement Discontinuity Method

A technique for modelling of three-dimensional(3D)quasi-statically propagating cracks in elastic bodies by the displacement discontinuity method(DDM)was described.When the crack is closed,the Mohr-coulomb rule on the two contacted surfaces of the crack must be satisfied.A simple iterative method was adopted in order to consider three different states of cracks.Under the assumption that the advance of the point on the crack front would occur only in the normal plane which is through this edge point,the maximum energy release rate criterion is modified to be used as the criterion for the crack growth.With discretization,the process of crack propagation can be seen as the advance of the vertices of the crack front.The program MCP3D was developed based on these theories to simulate the 3D quasi-static crack propagation.A numerical example of a penny-shaped crack subject to tension and compression in an infinite elastic media was analyzed with MCP3D,and the results in comparison with others' show that the present method for 3D crack propagation is effective.

The Study on the Sports Injuries and Psychological Stress of Chinese Elite Players

Through national gymnastics to 30 active athletes and 30 national women＇s handball training athletes, which results in the paper are as follows： outstanding gymnastics. The main part of injury is elbow, ankle, and the degree of damage to elbow as the worst. Women＇s handball player injury occurred campaign main pan is knees joint, ankle, with the most serious level of knee injuries. Outstanding women athletes in gymnastics and handball injury occurred campaign＇s state anxiety level is higher, were reached 49.37 ± 94 and 49. 00 ±61.3, excellent gymnast sports injury of the main source of stress for coach criticism, leading opponent table Now when the good. Good men＇s gymnastics athlete sports injury of main source of stress for physical or psychological made a mistake, coach criticism, suffered severe pain or injury After. Outstanding female handball player of the main source of the sports injury stress for the referee injustice, not the bad climate space equipment and error, etc. 4, excellent gymnastics The main way to deal with the players face for attributed to the outside world not controllable factors, focus your attention on the action or distracting, excellent handball in the athletes to diversify To strengthen the way to deal with the game for faith, quickly forget unhappy experience and experience of stress take more carefully way. The abstract should summarize the contents of the paper and should contain at least 70 and at most 150 words. It should be set in 9-point font size and should be inset 1.0 cm from the fight and left margins. There should be two blank （10-point） lines before and aiter the abstract. This document is in the required format.

New Pseudorandom Number Generator Artin-Sc hreier Tower for p = 5

The standard method to construct a finite field requires a primitive irreducible polynomial of a given degree. Therefore, it is difficult to apply for the construction of huge finite fields. To avoid this problem, we propose a new method to construct huge finite fields with the characteristic p = 5 by using an Artin-Schreier tower. Utilizing the recursive basis of the Artin-Schreier tower, we define a nmltiplication algorithm The algorithm can explicitly calculate the multiplication of two elements on the top finite field of this tower, without any primitive element. We also define a linear recurrence equation as an application, which produces a sequence of numbers, and call the new pseudorandom number generator Abstract Syntax Tree （AST） for p = 5. The experircental results show that our new pseudorandom number generator can produce a sequence of numbers with a long period.

Ophthalmic Syndrome Differentiation System and Digital Chinese Medicine

In traditional Chinese medicine(TCM),ophthalmic syndrome differentiation is an ophthalmology-specific method for identifying syndromes based on the“Five Orbiculi”theory.It was devised by Professor Qing-Hua PENG through an unprecedented combination of syndrome element differentiation and ophthalmic clinical practices,based on the Clinical Terminology of Chinese Medical Diagnosis and Treatment-Syndromes of the National Standards of the People's Republic of China.This approach integrates an ophthalmic syndrome differentiation system with digital Chinese medicine(DCM),and proposes the extraction of syndrome elements of ophthalmic diseases from research on DCM.These elements are then quantified and organized to form a model of digital diagnosis and treatment specific to ophthalmology,which should help to achieve synergistic development of the ophthalmic syndrome differentiation system and DCM.

Numerical Simulation of Projection Welding Processes for Door Hinge of Automobile Based on Coupled Fields Analysis

Projection welding is a variation of electric resistance welding with the dynamic changes of the flow paths for heat and electrical properties with changing temperature caused by the large plastic deformation collapse of projection. As the joint type between the auto door hinge and the inner plate, projection welding may bring welding distortions and would affect the assembly quality of auto body. A comprehensive electric-thermal-mechanical numerical simulation was performed to quantitatively simulate the processes of projection welding by using a coupled finite element method. The mechanism of projection collapse and the formation process of nugget were discussed and good conclusions have been achieved comparing with the test results.

An Improved Method for Modeling Spatial Distribution of δD in Surface Snow over Antarctic Ice Sheet

Using the recent compilation of the isotopic composition data of surface snow of Antarctic ice sheet, we proposed an improved interpolation method of δD, which utilizes geographical factors （i.e., latitude and altitude） as the primary predictors and incorporates inverse distance weighting （IDW） technique. The method was applied to a high-resolution digital elevation model （DEM） to produce a grid map of multi-year mean δD values with lkm spatial resolution for Antarctica. The mean absolute deviation between observed and estimated data in the map is about 5.4‰, and the standard deviation is 9‰. The resulting δD pattern resembles well known characteristics such as the depletion of the heavy isotopes with increasing latitude and distance from coast line, but also reveals the complex topographic effects.

Stability influence factors analysis and construction of a deep beam anchorage structure in roadway roof

Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are studied in this paper using mechanical calculations, numerical analysis and field measurements, A mechanical model of deep beam structure subjected to multiple loading is established, including analysis of roof support in the return airway of S1203 working face in the Yuwu coal mine, China, The expression of maximum shear stress in the deep beam structure is deduced according to the stress superposition criterion, It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing, The variation of maximum shear stress distribution and prestressed field diffusion effects according to various factors are analyzed using Matlah and FLAC3DTM software, and practical support parameters of the S1203 return airway roof are determined, According to the observations of rock pressure, there is no evidence of roof separation, and the maximum values of roof subsidence and convergence of wall rock are 72 and 48 mm, respectively, The results show that the proposed roof support design with a deep beam structure is feasible and achieves effective control of the roadway roof,

Study on the Digital Art Design and Practice of the Visual Elemems of Minority in Ningxia

Digital art design refers to the art and design activities that are implemented based on computers and related digital equipments. Today, the digital art has been extensively applied in all sorts of social areas and relevant industries such as animation, design, film and television production, games, advertising, multimedia design, and network. The artistic creations such as Helan Mountain Rock Painting, Xixia cultural patterns and ethnic patterns, in which Ningxia visual elements were taken as design themes, are diversified in forms and rich in contents, and also have been extensively applied. However, because of the application of the digital technology with powerful functions, the digital art has the ability to provide a wide creation space for national culture. Meanwhile, some special effects of the digital technology can also be applied in the creation of minority art.

Crime and Race： A Cross-Disciplinary Analysis of Hispanic Males and Criminality

The focus of this study is the critical analysis of data related to Hispanic males and criminality, Factors, such as marital status, income level, age, and police contact, are measureable entities that are at the core of the statistical ,analysis, A cross-disciplinary approach provides a cultural context for the statistical world of numbers, The socially conflicting terms of masculinity and maleness will lead to a discussion of macho behavior and criminaliW, Macho behavior, often interpreted as aggressive, may arouse police suspicion, In this case, the police will stop Hispanic males because of their behavior, not necessarily because they committed a crime, This study will show that the cycle of poverty prevents Hispanic males of low-income families from contacting with the police, whereas uneducated Hispanic males must confirm their masculinity in a criminal behavior, CriminaliW, often associated with violence as machismo, is the social over compensation for a male inferiority complex that finds its origin in the Spanish conquest of South America,

Autonomous optical navigation for interplanetary exploration based on information of earth-moon

The image elements of earth-center and moon-center are obtained by processing the images of earthand moon, these image elements in combination with the inertial attitude information and the moon ephemerisare utilized to obtain the probe initial position relative to earth, and the Levenberg-Marquardt algorithm is usedto determine the accurate probe position relative to earth, and the probe orbit relative to earth is estimated by u-sing the extended Kalman filter. The autonomous optical navigation algorithm is validated using the digital simu-lation.

At the Crossroads： Examining a New Paradigm for Documentaries in the Twenty-First Century

The culture and history of traditional documentaries carries a set of expectations about types and topics, which are covered by the genre. Documentaries are designed to push social agendas with few thoughts to the audience reaction. They align more closely with the vision of the creators and producers, often delivering ideological expressions that present cultural, political, and historical content. However, this might be a voice from the past as television, film, and consumer-generated content finds easy voices for expression due to accessibility of technology in the digital era. The role of documentaries as a genre is in the process of changing. The challenges to this type of production are the result of both intrinsic and extrinsic factors. Production costs for creating documentaries have simultaneously soared and shrunk, depending on the accessibility of equipment, post-production facilities and distribution. Of course there are many exceptions to this rule given outlets such as film festivals and YouTube as well as Michael Moore-level auteurs. External influences center on the blurring of lines, caused by the proliferation of television programs under the ＂umbrella＂ of reality television. This, in turn, begs the question： Is reality programming the new documentary or is it a new separate genre？ This discussion will explore the overlap and similarities that exist between documentary programming and reality television programming. Furthermore, it will develop a paradigm of comparisons that re-examines the role and character of documentary production and aesthetics within the landscape of the reality television genre.

Human Factors in the Analysis of the ＂Tram-Car Drivers＂ at Intersections

The modem tramway has resurfaced as the cure to today＇s urban transport problems such as pollution, road congestion and uneven access to transit. However, trams at intersections often experience frequent and extended delays due to vehicles crossing the tram tracks. There is an increased potential for conflict between trams and vehicles at these locations and crashes are common. The question of the effects of human factors on trams crossroads safety has been little dealt with in literature. The general aim of this article is to further knowledge about the influence of tramway and surrounding environment on car＇s driver behavior at intersections. Understanding these influences, involve conducting a systematic review of the cognitive tasks related to driving and identifying the hazards that can arise at each task, and what factors can make these more or less likely to arise, considering the environmental design at intersections and behavioral factors. To achieve that, the HAZOP （Hazard and Operability Study） approach is conducted for this study. Concerning data collection, the methodology includes site visits to record user behavior and questionnaires to determine the opinion, concerns and knowledge of car drivers in interaction with the tram environment.

Image Processing algorithm Based On The Solitary Wave

The core algorithm of digital image processing has mainly involved three aspects： random theory, wavelet analysis and partial differential equations. This paper presents a new algorithm, which takes the digital image as a pixel grid, and then establishes the dynamic equation that has solitary wave solutions. Moreover, the solution can become analytic so it can be applied to the image directly. Meanwhile, due to the elastic collision properties of the solitary wave, pixel of the same size can produce the same kind of solitary wave, which facilitates a further processing of pixel. The interplay between pixels can be further studied in terms of collision property on account of the nonlinear effect. Analysis of the algorithm shows that solitary wave amplitude characterize the effect between adjacent pixels, and the phase change of solitary waves provide the azimuth information of image.

秋风起兮尽相思

秋风秋雨秋零乱,情浓情深情意长。半朵素字,一笺梦语,静静诉柔肠。记得一个寒冷的秋晨,家附近新开了一个蛋糕店。我趴在玻璃墙上,想买,又担心太贵。外婆说:'想吃就去买,我给你付钱。'香甜的蛋糕带着浓浓的暖意,我趴在外婆的背上,丝毫感觉不到秋天的任何一点悲凉之意。外婆背着我,穿过大街小巷,在城市的每一个角落,都留下欢声笑语。一瞬间似乎全都回想起来了。

Halton-type sequences from global function fields

For any prime power q and any dimension s≥1, a new construction of (t, s)-sequences in base q using global function fields is presented. The construction yields an analog of Halton sequences for global function fields. It is the first general construction of (t, s)-sequences that is not directly based on the digital method. The construction can also be put into the framework of the theory of (u, e, s)-sequences that was recently introduced by Tezuka and leads in this way to better discrepancy bounds for the constructed sequences.

Numerical Study on the Thermal Stress and its Formation Mechanism of a Thermoelectric Device

The strong thermo-mechanical stress is one of the most critical failure mechanisms that affect the durability of thermoelectric devices. In this study, numerical simulations on the formation mechanism of the maximum thermal stress inside the thermoelectric device have been performed by using finite element method. The influences of the material properties and the thermal radiation on the thermal stress have been examined. The results indicate that the maximum thermal stress was located at the contact position between the two materials and occurred due to differential thermal expansions and displacement constraints of the materials. The difference in the calculated thermal stress value between the constant and the variable material properties was between 3% and 4%. At a heat flux of 1 W·cm^(-2) and an emissivity of 0.5, the influence of the radiation heat transfer on the thermal stress was only about 5%; however, when the heat flux was 20 W·cm^(-2) and the emissivity was 0.7, the influence of the radiation heat transfer was more than 30%.