‘纤序’芒栽培技术及园林应用

‘纤序’芒是芒属观赏草中的一个新优品种,具有抗性强、养护要求低、观赏价值高的优点,是节约型园林绿化的优良植物材料。本文对‘纤序’芒的品种特性和栽培技术要点进行了阐述,并对其在北京城市绿地中的应用模式进行了分析,可为芒属观赏草的合理应用提供示范与参考。

光缆纤序及衰耗自动检测系统的研究与实现

随着光纤的大量应用,新增光缆数每年都在递增,进而使得光缆验收工作变得愈发繁重。在新建通信光缆完工后的验收过程中,经常遇到光缆纤芯熔接顺序错误,以及光缆不通的情况。使用传统方法进行验收测试时,耗时较长且容易发生误判。为了解决这些问题,文章设计出一套能够实现光缆的纤序、通断、衰耗自动检测的系统,系统采用多路光开关,由STC11F60XE系统板进行控制,解决了光缆验收过程中存在的耗时长、准确率低、专业要求水平高等问题。

光纤通信中纤芯乱序问题的探讨和解决

光纤传输网络是通信运营商运行的基础支撑网络。随着光纤网络的发展,由于各种原因,出现了纤序混乱和鸳鸯的情况,对光缆的割接、基站搬迁、光缆抢修带来极大的障碍,本文分析来乱纤问题产生的原因,通过一些常用的方法,分析在不同的场景下如何应对和解决纤序混乱问题,对现场维护有一定指导意义。

光缆多路自动对纤测试系统的设计与实现

针对短、中、长距离光纤通信网络中突发故障情况下难以快速、准确地恢复光缆中每条光纤的首尾端序号一一对应的现状,文章设计了一种基于信道编码技术的48路自动对纤测试系统。本系统分为光源发送端、功率接收端和操作终端,由光源发送端送入一段特定的编码信号,光纤接收端识别编码信号,从而实现自动识别光纤信号特征来完成纤序对应关系。系统以单片机STM32F407为控制器,以FPGA和CPLD为主要数据处理单元完成各路光纤的纤序识别功能,操作终端生成自动对纤结果的报表并保存以备日后维修。整机产品经过实际测试,能够满足10～200 km中短距离或300 km长距离光缆的纤序识别,检测光功率信号在40 dB动态范围内,并且48路光纤的自动对纤时间控制在5 min之内,纤序识别率达到100%。

Mesoporous Carbon Nanofibers Loaded with Ordered PtFe Alloy Nanoparticles for Electrocatalytic Nitrate Reduction to Ammonia

Highly dispersed bimetallic alloy nanoparticle electrocatalysts have been demonstrated to exhibit exceptional performance in driving the nitrate reduction reaction(NO_(3)RR)to generate ammonia(NH_(3)).In this study,we prepared mesoporous carbon nanofibers(mCNFs)functionalized with ordered PtFe alloys(O-PtFe-mCNFs)by a composite micelle interface-induced co-assembly method using poly(ethylene oxide)-block-polystyrene(PEO-b-PS)as a template.When employed as electrocatalysts,O-PtFe-mCNFs exhibited superior electrocatalytic performance for the NO_(3RR)compared to the mCNFs functionalized with disordered PtFe alloys(D-PtFe-mCNFs).Notably,the NH_(3)production performance was particularly outstanding,with a maximum NH_(3)yield of up to 959.6μmol/(h·cm~2).Furthermore,the Faraday efficiency(FE)was even 88.0%at-0.4 V vs.reversible hydrogen electrode(RHE).This finding provides compelling evidence of the potential of ordered PtFe alloy catalysts for the electrocatalytic NO_(3)RR.

银川市区有线电视网络光缆割接规程

由于城市道路改、扩建和光缆杆路、路由的调整,需要对光缆线路进行割接.光缆线路由架空转入地埋管道、将架空光缆线路路由做必要的调整.为了保证光缆割接工作顺利进行,保证业务在最少时间内中断,提高工作效率,必须进行严密的组织配合和协调工作.

Effect of Chinese medicine Qinggan Huoxuefang on inducing HSC apoptosis in alcoholic liver fibrosis rats

AIM： To investigate the effect of Qinggan Huoxuefang （QGHXF） on improvement of liver function and pathology in rats, and to analyze the mechanism. METHODS： Wistar rats were divided into three groups at random： normal control group （12）, micro-amount carbon tetrachlodde group （CCh）（12） and model group A （60）. The model group A was ingested with the mixture （500 mL/L alcohol, 8 mL/kg per day; corn oil, 2 mL/kg per day; pyrazole, 24 mg/kg per day） once a day and intraperitoneal injections of 0.25 mL/kg of a 250 mL/L solution of CCh in olive oil twice a week for 12 wk. The CCh group received intraperitoneal injections only. At the end of 8 wk the model group A （60） was divided into 5 subgroups： model group, Xiaochaihu Chongji （XCH） group, QGHXF high dose group, moderate dose group and low dose group, and were given the drugs respectively. At the end of 12 wk, all the rats were killed and blood samples collected, as well as liver tissue. Blood samples were used for evaluation of alanine transaminase （ALT）, aspartate aminotransferase （AST）, alkaline phosphatase （ALP）, gamma-glutamyltransferase （y-GT）. Liver specimens were obtained for routine HE, apoptosis gene array and flow cytometry analysis. RESULTS： A liver fibrosis animal model was successfully established. Fibrosis was obviously reduced in QGHXF high dose group, and no fibrosis formed in CCh group. Compared with model group the QGHXF group and XCH group could obviously decrease the level of ALT, AST, ALP, and GGT （P〈0.05）. QGHXF high dose group was better than XCH group in ALT （615± 190 vs 867± 115）,and AST（1972 ± 366 vs 2777 ± 608）. Moreover, QGHXF could reduce liver inflammation, fibrosis-induced hepatic stellate cell （HSC） apoptosis and regulate apoptosis gene expression. The HSC apoptosis rates of QGHXF groups were 22.4±3.13, 13.79±2.26 and 10.07± 1.14, higher than model group, 6.58±1.04 （P〈 0.05）. Compared to model group, 39 genes were up-regulated, 11 solely expressed and 17 down-regulated in high dose group. CONCLUSION： QGHXF can improve liver fibrosis and induce HSC apoptosis.

Molecular phylogeny and species separation of five morphologically similar Holosticha-complex ciliates(Protozoa, Ciliophora) using ARDRA riboprinting and multigene sequence data

To separate and redefine the ambiguous Holosticha-complex, a confusing group of hypotrichous ciliates, six strains belonging to five morphospecies of three genera, Holosticha heterofoissneri, Anteholosticha sp. popl, Anteholosticha sp. pop2, A. manca, A. gracilis and Nothoholostichafasciola, were analyzed using 12 restriction enzymes on the basis of amplified ribosomal DNA restriction analysis. Nine of the 12 enzymes could digest the DNA products, four （HinfⅠ, Hind Ⅲ, Msp Ⅰ, Taq Ⅰ） yielded species-specific restriction patterns, and Hind Ⅲ and Taq Ⅰ produced different pattems for two Anteholosticha sp. populations. Distinctly different restriction digestion haplotypes and similarity indices can be used to separate the species. The secondary structures of the five species were predicted based on the ITS2 transcripts and there were several minor differences among species, while two Anteholosticha sp. populations were identical. In addition, phylogenies based on the SSrRNA gene sequences were reconstructed using multiple algorithms, which grouped them generally into four clades, and exhibited that the genus Anteholosticha should be a convergent assemblage. The fact that Holosticha species clustered with the oligotrichs and choreotrichs, though with very low support values, indicated that the topology may be very divergent and unreliable when the number of sequence data used in the analyses is too low.

Feature Recognition of Low-resolution Fiber Image

The interpolatory edge operator is applied to the recognition of cotton and ramie fibers. Its performance is studied in comparison with the Canny edge operator in the fiber’s edge detection for cross-sectional image. The input image is interpolated other than Gaussian function smoothing. The quality of edge output is improved by the interpolatory edge operator. It produces edge output with good continuity for low-resolution input. The fine edge output, such as cross-markings, can be distinguished clearly, so the interpolatory edge operator is suitable for the study of cotton and ramie fibers. Furthermore, the application of the interpolatory edge operator can cut the hardware cost, reduce the storage and speed up the data transmission.

Research of Degumming Process, Microstructure and Properties of Mulberry Fiber

More and more novel nature fibers are used in textiles. The natural fibers include banana fiber, pineapple fiber and bamboo fiber etc. In this paper, as a kind of novel natural fiber, mulberry fiber is studied. The chemical component of mulberry bast is tested and analyzed. Meanwhile, the degumming method and process of mulberry bast are studied. Chemical degumming experiments to investigate the influence of alkali concentration, alkali boiling time and sodium phosphate tribasic ratio to material are conducted. Consequently, optimum parameters are obtained. The crystallinity of mulberry fiber is tested by using X-ray line, and the photos of scanning electron microscope （SEM） are observed. Testing results of the fiber properties （e. g. fineness, tenacity, length and elongation） show that mulberry fiber can be spun blend with cotton.

Phylogenetic studies of four species of ciliate inferred from 16s-like small subunit rRNA gene sequences

The phylogenetic relationships of four ciliate genera （Urostyla, Euplotes, Stylonychia and Pseudokeronopsis）, which also are the important environment inspection species, were analyzed by the comparison of small subunit ribosomal RNA gene sequences. Euplotes appeared as an early branching group whose divergence from the hypotrichous line at a deep level was strongly supported by parsimony and matrix analyses. The analyses also supported the hypothesis that there were closely relationship between species in Urostyla and Holosticha. The sibling species Stylonychia mytilus and S. lemnae could be separated by the evolutionary analyses. Furthermore, Pseudokeronopsis rubra had relatively more closely relationship with the species in Holostichidae than that in Urostylidae based on the evolutionary distance value.

Molecular phylogeny of oligotrich genera Omegastrombidium and Novistrombidium(Protozoa,Ciliophora) for the systematical relationships within Family Strombidiidae

The phylogeny of the oligotrich ciliates is currently a hot debate despite the availability of both morphological and molecular data.In the present paper,further small subunit rRNA(SS rRNA) genes were analyzed from the Genera Omegastrombidium and Novistrombidium,as well as from Strombidium,and combined with three new SS rRNA sequences from Strombidium basimorphum,S.sulcatum population QD-1,and Novistrombidium testaceum population GD.The phylogenetic positions of these organisms were inferred using Bayesian inference,Maximum Likelihood,and Maximum Parsimony methods.The main results are:(1) the SS rRNA gene sequence analyses match the recent findings about the molecular evolution of oligotrichs,indicating that the family Strombidiidae is paraphyletic;(2) the Genus Omegastrombidium is separated from the Genus Strombidium,as shown in recent cladistic analyses;(3) morphospecies in Genus Novistrombidium,based on similarity of somatic ciliature,are separated from each other in all topological trees,indicating that this genus could be a paraphyletic group;(4) the molecular data indicate a possibility of paraphyly for the genus Strombidium;and(5) the similarities of the SS rRNA gene of specimens identified as S.sulcatum and S.inclinatum are 99.8%-100%.However,present knowledge on the oligotrichs sensu stricto is still insufficient and further studies based on both molecular and other technologies are required.

Molecular Phylogenetic Lineage of Plagiopogon and Askenasia(Protozoa, Ciliophora) Revealed by Their Gene Sequences

Prostomates and haptorians are two basal groups of ciliates with limited morphological characteristics available for tax- onomy. Morphologically, the structures used to identify prostomates and haptorians are similar or even identical, which generate heavy taxonomic and phylogenetic confusion. In present work, phylogenetic positions lineage of two rare genera, Plagiopogon and Askenasia, were investigated. Three genes including small subunit ribosomal RNA gene （hereafter SSU rDNA）, internal transcribed spacer region （ITS region）, and large subunit ribosomal RNA gene （LSU rDNA） were analyzed, 10 new sequences five species each. Our findings included 1） class Prostomatea and order Haptorida are multiphyletic; 2） it may not be appropriate to place order Cyclotriehiida in subclass Haptoria, and the systematic lineage of order Cyclotrichiida needs to be verified further; 3） genus Plagio- pogon branches consistently within a clade covering most prostomes and is basal of clade Colepidae, implying its close lineage to Prostomatea; and 4） Askenasia is phylogenetically distant from the subclass Haptoria but close to classes Prostomatea, Plagiopylea and Oligohymenophorea. We supposed that the toxicyst of Askenasia may be close to taxa of prostomes instead of haptorians, and the dorsal brush is a more typical morphological characteristics of haptorians than toxicysts.

Description of a new species and the first instar larvae of Homidia(Collembola:Entomobryidae) from Taizhou,Zhejiang Province

A new species with four macrochaetae in the ＂eyebrow＂ of the anterior dorsal abdominal segment Ⅳ （Abd.Ⅳ）, Homidia quadriseta Pan sp. nov. is described fi＇om Zhejiang Province, eastern China. It can be discriminated from other recorded species in this genus by entire Abd. Ⅲ and posterior half Abd. IV darkly pigmented, 1 macrochaetae on medial Abd. Ⅲ, 2＋2 macrochaetae in ＂eyebrow＂ on anterior Abd. Ⅳ and 3 macrochaetae on posterior central Abd. Ⅳ, clypens with 12 chaetae, and fewer dental spines （7-8） on basal internal denes and with most spines slightly ciliated. Also, the chaetotaxy of the first instar of this new species is provided here.

Phylogeny of subclass Scuticociliatia(Protozoa,Ciliophora) using combined data inferred from genetic,morphological,and morphogenetic evidence

Gene sequence-based genealogies of scuticociliates are different from those produced by morphological analyses.For this reason,11 representative scuticociliates and two ambiguously related genera were chosen to test the ability of combined phylogenetic analyses using both gene sequences and morphological/morphogenetic characteristics.Analyses of both the SSrRNA gene sequences and the combined datasets revealed a consistent branching pattern.While the terminal branches and the order level relationships were generally well resolved,the family level relationships remain unresolved.However,two other trees based on ITS1-5.8S-ITS2 region sequences and morphological/morphogenetic characters showed limited information,due to a lack of informative sites in these two datasets.Our data suggest,however,that the combined analysis of morphological/morphogenetic characters and gene sequences did produce some changes to the phylogenetic estimates of this group.

An Experimental Investigation of Glass Transition Temperature of Composite Materials Using Bending Test

In this study, the bending test is used to investigate the glass transition temperature for epoxy reinforced with three types ot fibers, fiberglass, Kevlar and synthetic wool, these materials have a wide used in many application which they are used composite materials. The glass transition temperature can be measured at the point of inflection for ＂the curve of variation of the deflection and temperature. The results show that, the glass transition temperature is affected by the type of the reinforcement of the composites. On the other hand, the glass transition temperature of the wool composite is higher than the other.

THE STUDY ON RELATED GENES IN THE NEOPLASTIC TRANSFORMATION OF IMMORTALIZED HUMAN FETAL TRACHEAL FIBROBLAST CELLS INDUCED BY IRRADIATION

In this study, we investigated the genes related to the transformation of immortalized human fetal tracheal fibroblast cell line induced by alpha particles by means of differential display mRNA method. The result revealed that there were 23 DNA fragments that were expressed intensively in alphaSHTF cells (SHTF cells forming clone on agar after irradiated by alpha particles emitted by 238Pu) only and not in SHTF (SV40-immortalized human fetal tracheal fibroblast) cells. Northern dot confirmed two fragments, C17-5, C23-1 which showed intensive mRNA expression in alphaSHTF cells, but not in SHTF cells. The length of the C17-5 fragment was 310bp. Searching in BLAST database revealed that the C17-5 fragment might be an unknown sequence.

OFS Research Over the Last 10 Years at CQU ＆ UESTC

This article reviews my new optical fiber sensing （OFS） research activities in China for the last ten years at Chongqing University and University of Electronic Science and Technology of China, since I returned from UK in 1999. The research progress in long period fiber gratings （LPFGs）, distributed fiber sensing systems and microfiber sensors is introduced. For LPFGs, the processing method with high-frequency CO2 laser pulses types of LPFGs fabricated and the related applications for both optical sensing and optical communication are described. For distributed fiber sensing systems, the fiber-optic polarization optical time domain reflectometer （POTDR）, fiber-optic phase-sensitive optical time domain reflectometer （φ-OTDR） and Brillouin optical time-domain analyzer （BOTDA） are developed, respectively. For microfiber sensors, we mainly focus on the knot resonator and its application for sensing of the refractive index and acceleration, etc.

Robust Fiber-Optic Sensor Networks

The ability to operate despite failure will become increasingly important as the use of optical sensor networks grows, and the amount of sensing information to be handled by a sensor network is increasing, especially for safety and security applications. In this review, the four categories of protection to allow service to be reestablished after a failure （dedicated/shared and line/path） are thoroughly discussed. This paper also presents an overview of the most representative robust fiber-optic sensor systems, discussing their schemes, pros and cons.