XCTD, as one of the most important instruments for the deep sea exploration, is an important device for deep-sea hydrological data acquisition. But some difficult technical problems of traditional metal enameled wire ...XCTD, as one of the most important instruments for the deep sea exploration, is an important device for deep-sea hydrological data acquisition. But some difficult technical problems of traditional metal enameled wire channel have become the major bottleneck for XCTD development. Aiming at this problem, this paper puts forward with using single-mode fiber as the transmission channel of XCTD. Firstly, this paper makes a brief analysis on the problems of using enameled wire as transmission channel faces. Secondly, it analyzes the advantages of the single mode fiber technology. Finally, it makes theoretical research and experimental verification of the influence of seawater temperature change on the optical fiber transmission channel. The experimentat results show that the error rate at the transmission rate of 10 MB/S is 0, and the loss can be negligible when the single-mode fiber channel is used in the sea water and the seawater temperature changes from 0 to 20℃. This method will greatly increase the rate of signal transmission and the transmission stability. And this paper shows that using the single-mode fiber as the transmission channel of XCTD has certain feasibility.展开更多
We report on a fast and sensitive temperature sensor using a micro-structured or photonic crystal fiber interferometer with a high germanium doped fiber core. The wavelength sensitivity for temperature variation was a...We report on a fast and sensitive temperature sensor using a micro-structured or photonic crystal fiber interferometer with a high germanium doped fiber core. The wavelength sensitivity for temperature variation was as high as △λ/△T= 78 pm/℃ up to 500℃, which was 6 times more sensitive than the fiber Bragg grating temperature sensitivity of △λ/△TT= 13pm/℃ at 1550nm. The sensor device was investigated conceming the sensitivity characteristics and response time.展开更多
An interferometer based on a D-shape chaotic optical tiber tor measurement ot multiparameters was proposed. The sensing structure relied on a D-shape fiber section spliced in between two singlemode fibers and interrog...An interferometer based on a D-shape chaotic optical tiber tor measurement ot multiparameters was proposed. The sensing structure relied on a D-shape fiber section spliced in between two singlemode fibers and interrogated in transmission. The optical spectrum was composed by multiple interference loss peaks, which were sensitive to the refractive index, temperature and strain-maximum sensitivities of 95.2 nm/RIU, 10.5 pm/℃ and -3.51 pm/με, respectively, could be achieved.展开更多
An all-metal 3-component optical fiber seismometer was proposed and experimentally demonstrated. The theoretical analysis was given based on the electro-mechanical theory. Calibration results showed that the axis sens...An all-metal 3-component optical fiber seismometer was proposed and experimentally demonstrated. The theoretical analysis was given based on the electro-mechanical theory. Calibration results showed that the axis sensitivity was about 41 dB （re： 0dB=1rad/g） with a fluctuation ＋2dB in the frequency bandwidth of 5 Hz - 400 Hz. A transverse sensitivity of about -40 dB was achieved. The fluctuation of the acceleration sensitivity for the three accelerometers in the seismometer was within ±2.5 dB. The minimum phase demodulation detection accuracy of the phase-generated cartier （PGC） was 10-Srad/√Hz, and the minimum detectable acceleration was calculated to be 90 ng/√Hz.展开更多
In this paper, a tension insensitive Pb S fiber temperature sensor based on Sagnac interferometer is proposed and demonstrated. The sensing mechanism of tension and temperature is analyzed. The relationships between t...In this paper, a tension insensitive Pb S fiber temperature sensor based on Sagnac interferometer is proposed and demonstrated. The sensing mechanism of tension and temperature is analyzed. The relationships between the interference spectrum, temperature and tension are analyzed, respectively. The experimental temperature range is 36—70 °C. The experimental results show that the interference spectrum is red shifted, and its sensitivity is 53.89 pm/°C. In tension experiment, the tension range is 0—1 400 με. The experimental results show that there is no wavelength shift in the interference spectrum. The sensor is immune to tension cross-sensitivity compared with other sensors. It can be used for temperature testing in aerospace, chemistry and pharmacy.展开更多
A novel miniature Fabry-Perot interferometric(FPI) temperature sensor is proposed and demonstrated experimentally. The modal interferometer is fabricated by just splicing a section of photonic crystal fiber(PCF) with ...A novel miniature Fabry-Perot interferometric(FPI) temperature sensor is proposed and demonstrated experimentally. The modal interferometer is fabricated by just splicing a section of photonic crystal fiber(PCF) with a single-mode fiber(SMF). The air holes of the PCF are fully collapsed by the discharge arc during the splicing procedure to enhance the reflection coefficient of the splicing point. The transmission spectra with different temperatures are measured, and the experimental results show that the linear response of 11.12 pm/°C in the range of 30–80 °C is obtained. This sensor has potential applications in temperature measurement field.展开更多
A novel optical microfiber asymmetric Fabry-Perot interferometric （MAFPI） sensor is developed for simultaneous measurement of force and temperature. The MAFPI structure is formed by a weak fiber Bragg grating （FBG...A novel optical microfiber asymmetric Fabry-Perot interferometric （MAFPI） sensor is developed for simultaneous measurement of force and temperature. The MAFPI structure is formed by a weak fiber Bragg grating （FBG）, a section of the microfiber, and a cleaved fiber end surface. The narrowband beam reflected from the low-reflectivity FBG and the broadband beam from the Fresnel reflection interfere lead to its unique sensing performance. The force sensing is performed by detecting the bending-loss induced fringe contrast changes, while the Bragg wavelength shift is employed for temperature measurement. Sensitivities of 9.8pm/℃ and 0.025dB/μN were obtained experimentally for temperature and force measurements, respectively.展开更多
基金supported by the Research Program of Application Foundation and Advanced Technology of Tianjin (No. 14JCYBJC16300)the National Natural Science Foundation of China (No. 41206031)
文摘XCTD, as one of the most important instruments for the deep sea exploration, is an important device for deep-sea hydrological data acquisition. But some difficult technical problems of traditional metal enameled wire channel have become the major bottleneck for XCTD development. Aiming at this problem, this paper puts forward with using single-mode fiber as the transmission channel of XCTD. Firstly, this paper makes a brief analysis on the problems of using enameled wire as transmission channel faces. Secondly, it analyzes the advantages of the single mode fiber technology. Finally, it makes theoretical research and experimental verification of the influence of seawater temperature change on the optical fiber transmission channel. The experimentat results show that the error rate at the transmission rate of 10 MB/S is 0, and the loss can be negligible when the single-mode fiber channel is used in the sea water and the seawater temperature changes from 0 to 20℃. This method will greatly increase the rate of signal transmission and the transmission stability. And this paper shows that using the single-mode fiber as the transmission channel of XCTD has certain feasibility.
文摘We report on a fast and sensitive temperature sensor using a micro-structured or photonic crystal fiber interferometer with a high germanium doped fiber core. The wavelength sensitivity for temperature variation was as high as △λ/△T= 78 pm/℃ up to 500℃, which was 6 times more sensitive than the fiber Bragg grating temperature sensitivity of △λ/△TT= 13pm/℃ at 1550nm. The sensor device was investigated conceming the sensitivity characteristics and response time.
文摘An interferometer based on a D-shape chaotic optical tiber tor measurement ot multiparameters was proposed. The sensing structure relied on a D-shape fiber section spliced in between two singlemode fibers and interrogated in transmission. The optical spectrum was composed by multiple interference loss peaks, which were sensitive to the refractive index, temperature and strain-maximum sensitivities of 95.2 nm/RIU, 10.5 pm/℃ and -3.51 pm/με, respectively, could be achieved.
文摘An all-metal 3-component optical fiber seismometer was proposed and experimentally demonstrated. The theoretical analysis was given based on the electro-mechanical theory. Calibration results showed that the axis sensitivity was about 41 dB （re： 0dB=1rad/g） with a fluctuation ＋2dB in the frequency bandwidth of 5 Hz - 400 Hz. A transverse sensitivity of about -40 dB was achieved. The fluctuation of the acceleration sensitivity for the three accelerometers in the seismometer was within ±2.5 dB. The minimum phase demodulation detection accuracy of the phase-generated cartier （PGC） was 10-Srad/√Hz, and the minimum detectable acceleration was calculated to be 90 ng/√Hz.
基金supported by the National Natural Science Foundation of China(Nos.61675176,61575170 and 61475133)the Research Program of Hebei Province(Nos.16961701D and F2015203270)+1 种基金the Graduate Innovation Project(Nos.2015XJSS031 and 2015XJSS028)the "XinRuiGongCheng" Talent Project of Yanshan University
文摘In this paper, a tension insensitive Pb S fiber temperature sensor based on Sagnac interferometer is proposed and demonstrated. The sensing mechanism of tension and temperature is analyzed. The relationships between the interference spectrum, temperature and tension are analyzed, respectively. The experimental temperature range is 36—70 °C. The experimental results show that the interference spectrum is red shifted, and its sensitivity is 53.89 pm/°C. In tension experiment, the tension range is 0—1 400 με. The experimental results show that there is no wavelength shift in the interference spectrum. The sensor is immune to tension cross-sensitivity compared with other sensors. It can be used for temperature testing in aerospace, chemistry and pharmacy.
基金supported by the National Natural Science Foundation of China(Nos.61205068 and 61475133)the College Youth Talent Project of Hebei Province(No.BJ2014057)"Xin Rui Gong Cheng"Talent Project and the Excellent Youth Funds for School of Information Science and Engineering in Yanshan University(No.2014201)
文摘A novel miniature Fabry-Perot interferometric(FPI) temperature sensor is proposed and demonstrated experimentally. The modal interferometer is fabricated by just splicing a section of photonic crystal fiber(PCF) with a single-mode fiber(SMF). The air holes of the PCF are fully collapsed by the discharge arc during the splicing procedure to enhance the reflection coefficient of the splicing point. The transmission spectra with different temperatures are measured, and the experimental results show that the linear response of 11.12 pm/°C in the range of 30–80 °C is obtained. This sensor has potential applications in temperature measurement field.
基金This work is supported by the National Natural Science Foundation of China （61107073, 61107072 and 61290312）, Fundamental Research Funds for the Central Universities （ZYGX2011J002）, Research Fund for the Doctoral Program of Higher Education of China （20110185120020）, Program for Changjiang Scholars and Innovative Research Team in University （PCSIRT, IRT1218）, and the 111 Project （B 14039）. Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author（s） and source are credited.
文摘A novel optical microfiber asymmetric Fabry-Perot interferometric （MAFPI） sensor is developed for simultaneous measurement of force and temperature. The MAFPI structure is formed by a weak fiber Bragg grating （FBG）, a section of the microfiber, and a cleaved fiber end surface. The narrowband beam reflected from the low-reflectivity FBG and the broadband beam from the Fresnel reflection interfere lead to its unique sensing performance. The force sensing is performed by detecting the bending-loss induced fringe contrast changes, while the Bragg wavelength shift is employed for temperature measurement. Sensitivities of 9.8pm/℃ and 0.025dB/μN were obtained experimentally for temperature and force measurements, respectively.
