Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin ...Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin films were deposited on MC membrane at room temperature using radio frequency （RF） magnetron sputtering.The optimum ITO deposition conditions were achieved by examining crystalline structure,surface morphology and op-toelectrical characteristics with X-ray diffraction （XRD）,scanning electron microscopy （SEM）,atomic force mi-croscopy （AFM）,and UV spectroscopy.The sheet resistance of the samples was measured with a four-point probe and the resistivity of the film was calculated.The results reveal that the preferred orientation of the deposited ITO crystals is strongly dependent upon with oxygen content （O2/Ar,volume ratio） in the sputtering chamber.And the ITO crystalline structure directly determines the conductivity of ITO-deposited films.High conductive [sheet resis-tance ～120 Ω·square-1 （Ω·sq-1）] and transparent （above 76%） ITO thin films （240 nm thick） were obtained with a moderate sputtering power （about 60 W） and with an oxygen flow rate of 0.25 ml·min-1 （sccm） during the deposi-tion.These results show that the ITO-MC electrodes can find their potential application in optoelectrical devices.展开更多
An immobilized cell membrane bioreaction system was developed to promote cell stability. The hollow fiber membrane bioreactor with immobilized Pseudomonas putida cells, operating in continual repeated batch operation ...An immobilized cell membrane bioreaction system was developed to promote cell stability. The hollow fiber membrane bioreactor with immobilized Pseudomonas putida cells, operating in continual repeated batch operation mode was used for producing D-p-hydroxyphenylglycine from DL-5-p-hydroxyphenyl hydantoin. The concentration of N-carbamyl-D-p-hydroxyphenylglycine and D-p-hydroxyphenylglycine in the efflux was analyzed by high performance liquid chromatography at different intervals.展开更多
Wastewater from the production of cellulosic ethanol was treated by the processes of internal micro-electrolysis method ＋ABR＋UASB ＋MBR. The results of running indicated that, when COD is 12000 mg/L and HRT of UASB ...Wastewater from the production of cellulosic ethanol was treated by the processes of internal micro-electrolysis method ＋ABR＋UASB ＋MBR. The results of running indicated that, when COD is 12000 mg/L and HRT of UASB is 48 h, the COD removal rate reaches 72% and HRT of MBR is 20 h, COD removal rate is between 80.8% and 87.5%. The effluent COD concentration stabilized at 301- 537 mg/L, it indicates that the MBR system has a strong ability to resist impact load.展开更多
基金Supported by the National Natural Science Foundation of China （10776014） Nanjing University of Science and Technology （NUST） Research Funding
文摘Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin films were deposited on MC membrane at room temperature using radio frequency （RF） magnetron sputtering.The optimum ITO deposition conditions were achieved by examining crystalline structure,surface morphology and op-toelectrical characteristics with X-ray diffraction （XRD）,scanning electron microscopy （SEM）,atomic force mi-croscopy （AFM）,and UV spectroscopy.The sheet resistance of the samples was measured with a four-point probe and the resistivity of the film was calculated.The results reveal that the preferred orientation of the deposited ITO crystals is strongly dependent upon with oxygen content （O2/Ar,volume ratio） in the sputtering chamber.And the ITO crystalline structure directly determines the conductivity of ITO-deposited films.High conductive [sheet resis-tance ～120 Ω·square-1 （Ω·sq-1）] and transparent （above 76%） ITO thin films （240 nm thick） were obtained with a moderate sputtering power （about 60 W） and with an oxygen flow rate of 0.25 ml·min-1 （sccm） during the deposi-tion.These results show that the ITO-MC electrodes can find their potential application in optoelectrical devices.
文摘An immobilized cell membrane bioreaction system was developed to promote cell stability. The hollow fiber membrane bioreactor with immobilized Pseudomonas putida cells, operating in continual repeated batch operation mode was used for producing D-p-hydroxyphenylglycine from DL-5-p-hydroxyphenyl hydantoin. The concentration of N-carbamyl-D-p-hydroxyphenylglycine and D-p-hydroxyphenylglycine in the efflux was analyzed by high performance liquid chromatography at different intervals.
文摘Wastewater from the production of cellulosic ethanol was treated by the processes of internal micro-electrolysis method ＋ABR＋UASB ＋MBR. The results of running indicated that, when COD is 12000 mg/L and HRT of UASB is 48 h, the COD removal rate reaches 72% and HRT of MBR is 20 h, COD removal rate is between 80.8% and 87.5%. The effluent COD concentration stabilized at 301- 537 mg/L, it indicates that the MBR system has a strong ability to resist impact load.
