The purification and separation of durene from the mixture containing durene isomers were studied.Since the boiling points of tetramethyl benzene isomers are very close but their melting points are of great difference...The purification and separation of durene from the mixture containing durene isomers were studied.Since the boiling points of tetramethyl benzene isomers are very close but their melting points are of great differences,static melt crystallization was applied to separate and purify durene from its isomers.Crystallization experiments were carried out under various operating conditions.The effects of cooling rate,crystallization temperature,sweating temperature and sweating time on the yield and purity of crystal were investigated.Orthogonal experimental design method was adopted to analyze the factors that may affect the yield of durene.Under the optimal crystallization conditions,the purity of durene could reach as high as 99.06%with the yield of 75.3%through one crystallization process.By fitting purification data based on sweating time in isothermal operations,the purification rate coefficient was obtained.展开更多
With properties of complete degradation and favorable mechanical behavior, Mg and its alloys are regarded as the next generation medical metal materials. However, fast degradation and poor surface biocompatibility hin...With properties of complete degradation and favorable mechanical behavior, Mg and its alloys are regarded as the next generation medical metal materials. However, fast degradation and poor surface biocompatibility hinder their clinical applications. Inspired by the ＂petal effect＂, we successfully constructed a superhydrophobic and highly adhesive coating on pure Mg via a simple hydrothermal treatment in a solution containing sodium oleate. The superhydrophobicity of the fabricated coating results from its flake-like micro-nanostructure and the low-surface-energy oleate group. Water droplet on the superhydrophobic coating cannot roll off even when the sample is turned upside down, owing to the sealed air-pockets and the van der Waals’ attraction at the solidliquid interface, indicating a highly adhesive force. The chemical and mechanical stability of the superhydrophobic coating were measured. Potentiodynamic polarization and electrochemical impedance spectroscopy measurements suggest enhanced corrosion resistance of the as-prepared sample.Furthermore, cell cytotoxicity, migration and adhesion data of human umbilical vein endothelial cells（HUVECs） reveal an improved cytocompatibility of the modified surface. Finally,hemolysis assay and platelet adhesion assay suggest an improved hemocompatibility. It is believed that the facile and low-cost method can expand the new application of superhydrophobic surface with highly adhesive on Mg in biomedical fields.展开更多
基金Supported by the National Natural Science Foundation of China(21176172)Top Talents Program of Yunnan Province,China(2011HA010)
文摘The purification and separation of durene from the mixture containing durene isomers were studied.Since the boiling points of tetramethyl benzene isomers are very close but their melting points are of great differences,static melt crystallization was applied to separate and purify durene from its isomers.Crystallization experiments were carried out under various operating conditions.The effects of cooling rate,crystallization temperature,sweating temperature and sweating time on the yield and purity of crystal were investigated.Orthogonal experimental design method was adopted to analyze the factors that may affect the yield of durene.Under the optimal crystallization conditions,the purity of durene could reach as high as 99.06%with the yield of 75.3%through one crystallization process.By fitting purification data based on sweating time in isothermal operations,the purification rate coefficient was obtained.
基金financially supported by the Distinguished Young Scholars of China(51525207)the National Natural Science Foundation of China(31570973)+1 种基金the National Key Research and Development Program of China(2016YFC1100604)Shanghai Committee of Science and Technology,China(15441904900)
文摘With properties of complete degradation and favorable mechanical behavior, Mg and its alloys are regarded as the next generation medical metal materials. However, fast degradation and poor surface biocompatibility hinder their clinical applications. Inspired by the ＂petal effect＂, we successfully constructed a superhydrophobic and highly adhesive coating on pure Mg via a simple hydrothermal treatment in a solution containing sodium oleate. The superhydrophobicity of the fabricated coating results from its flake-like micro-nanostructure and the low-surface-energy oleate group. Water droplet on the superhydrophobic coating cannot roll off even when the sample is turned upside down, owing to the sealed air-pockets and the van der Waals’ attraction at the solidliquid interface, indicating a highly adhesive force. The chemical and mechanical stability of the superhydrophobic coating were measured. Potentiodynamic polarization and electrochemical impedance spectroscopy measurements suggest enhanced corrosion resistance of the as-prepared sample.Furthermore, cell cytotoxicity, migration and adhesion data of human umbilical vein endothelial cells（HUVECs） reveal an improved cytocompatibility of the modified surface. Finally,hemolysis assay and platelet adhesion assay suggest an improved hemocompatibility. It is believed that the facile and low-cost method can expand the new application of superhydrophobic surface with highly adhesive on Mg in biomedical fields.
