The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emissi...Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.展开更多
A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was ...A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was studied. The average nanotube diameter and length was 100 nm and 5 μm,respectively. The different amount of octahedral Cu2 O modified TNTs were obtained by varying electrochemical deposition time. TNTs modified with an optimized amount of Cu2 O nanoparticles exhibited high efficiency in the photocatalysis,and the predominant hydrocarbon product was methane. The methane yield increased with increasing Cu2 O content of the catalyst up to a certain deposition time,and decreased with further increase in Cu2 O deposition time. Insufficient deposition time（5 min） resulted in a small amount of Cu2 O nanoparticles on the TNTs,leading to the disadvantage of harvesting light. However,excess deposition time（45 min） gave rise to entire TNT surface being most covered with Cu2 O nanoparticles with large sizes,inconvenient for the transport of photo-generated carriers. The highest methane yield under simulated solar and visible light irradiation was observed for the catalysts prepared at a Cu2 O deposition time of 15 and 30 min respectively. The morphology,crystallization,photoresponse and electrochemical properties of the catalyst were characterized to understand the mechanism of its high photocatalytic activity. The TNT structure provided abundant active sites for the adsorption of reactants,and promoted the transport of photogenerated carriers that improved charge separation. Modifying the TNTs with octahedral Cu2 O nanoparticles promoted light absorption,and prevented the hydrocarbon product from oxidation. These factors provided the Cu2O-modified TNT photocatalyst with high efficiency in the reduction of CO2,without requiring co-catalysts or sacrificial agents.展开更多
The enhancement of the physicochemical characteristics of fossil fuel has been the subject of extensive research to achieve better efficiency and reduced emissions. Diesel is one of the fossil fuels that are highly co...The enhancement of the physicochemical characteristics of fossil fuel has been the subject of extensive research to achieve better efficiency and reduced emissions. Diesel is one of the fossil fuels that are highly consumed in daily life. This paper focuses on the behavior of a refined diesel fuel when copper oxide nanoparticles are added. The resulting blend ofnano-diesel has been analyzed using a four-stroke engine under two loads indicating light vehicles and heavy duty vehicles. The nano-diesel was prepared by the aid of an ultrasonicator and a mechanical homogenizer. A base diesel was taken as a reference to distinguish the effect of the nanoparticles additives. Three different samples with different concentrations are utilized in this study. As a result, the fuel consumption, exhaust temperature, brake power, power losses and engine efficiency have been evaluated and compared to the base diesel in order to demonstrate and access the enhanced performance of the nano-fuel blend. The three concentrations conducted were 100 ppm, 200 ppm and 300 ppm of copper oxide nanoparticles. The results represented that the pure refinery diesel has low exhaust temperatures, high brake power and high efficiency as compared to the commercial diesel supplied from a gas station. In addition, 300 ppm copper oxide nano-diesel showed improvement in engine performances as compared to the other concentrations and pure diesel. In this context, lowest fuel consumption for both passenger cars and heavy duty vehicles was achieved, brake power for passenger cars only was improved and input power showed improvement however, exhaust temperature was the highest as for this fuel.展开更多
Copper oxide nanowires and nanoparticles were fabricated through electrospinning followed by calcinations in different heating conditions.It was found that the solution viscosity and environment humidity had great imp...Copper oxide nanowires and nanoparticles were fabricated through electrospinning followed by calcinations in different heating conditions.It was found that the solution viscosity and environment humidity had great impact on the morphologies of precursor nanowires,and the parameters of heat treatment,including final temperature and heating rate,significantly affected the product morphologies.展开更多
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
基金Project(2010CB631001)supported by the National Basic Research Program of ChinaProject(50871046)supported by the National Natural Science Foundation of China
文摘Cu-doped TiO2 nanoparticles with different doping contents from 0 to 2.0% （mole fraction） were synthesized through sol-gel method. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and field emission scanning electron microscope （FE-SEM） were used to characterize the crystalline structure, chemical valence states and morphology of TiO2 nanoparticles. UV-Vis absorption spectrum was used to measure the optical absorption property of the samples. The photocatalytic performance of the samples was characterized by degrading 20 mg/L methyl orange under UV-Vis irradiation. The results show that the Cu-doped TiO2 nanoparticles exhibit a significant increase in photocatalytic performance over the pure TiO2 nanoparticles, and the TiO2 nanoparticles doped with 1.0% Cu show the best photocatalytic performance. The improvement in photocatalytic performance is attributed to the enhanced light adsorption in UV-Vis range and the decrease of the recombination rate of photoinduced electron-hole oair of the Cu-doped TiO2 nanoparticles.
基金supported by the National Natural Science Foundation of China(2137704421573085)+5 种基金the Key Project of Natural Science Foundation of Hubei Province(2015CFA037)Wuhan Planning Project of Science and Technology(2014010101010023)Self-determined Research Funds of CCNU from the Colleges’Basic Research and Operation of MOE(CCNU15ZD007CCNU15KFY005)China Postdoctoral Science Foundation(2015M572187)Hubei Provincial Department of Education(D20152702)~~
文摘A photocatalyst composed of TiO 2 nanotube arrays（TNTs） and octahedral Cu2 O nanoparticles was fabricated,and its performance in the photocatalytic reduction of CO2 under visible and simulated solar irradiation was studied. The average nanotube diameter and length was 100 nm and 5 μm,respectively. The different amount of octahedral Cu2 O modified TNTs were obtained by varying electrochemical deposition time. TNTs modified with an optimized amount of Cu2 O nanoparticles exhibited high efficiency in the photocatalysis,and the predominant hydrocarbon product was methane. The methane yield increased with increasing Cu2 O content of the catalyst up to a certain deposition time,and decreased with further increase in Cu2 O deposition time. Insufficient deposition time（5 min） resulted in a small amount of Cu2 O nanoparticles on the TNTs,leading to the disadvantage of harvesting light. However,excess deposition time（45 min） gave rise to entire TNT surface being most covered with Cu2 O nanoparticles with large sizes,inconvenient for the transport of photo-generated carriers. The highest methane yield under simulated solar and visible light irradiation was observed for the catalysts prepared at a Cu2 O deposition time of 15 and 30 min respectively. The morphology,crystallization,photoresponse and electrochemical properties of the catalyst were characterized to understand the mechanism of its high photocatalytic activity. The TNT structure provided abundant active sites for the adsorption of reactants,and promoted the transport of photogenerated carriers that improved charge separation. Modifying the TNTs with octahedral Cu2 O nanoparticles promoted light absorption,and prevented the hydrocarbon product from oxidation. These factors provided the Cu2O-modified TNT photocatalyst with high efficiency in the reduction of CO2,without requiring co-catalysts or sacrificial agents.
文摘The enhancement of the physicochemical characteristics of fossil fuel has been the subject of extensive research to achieve better efficiency and reduced emissions. Diesel is one of the fossil fuels that are highly consumed in daily life. This paper focuses on the behavior of a refined diesel fuel when copper oxide nanoparticles are added. The resulting blend ofnano-diesel has been analyzed using a four-stroke engine under two loads indicating light vehicles and heavy duty vehicles. The nano-diesel was prepared by the aid of an ultrasonicator and a mechanical homogenizer. A base diesel was taken as a reference to distinguish the effect of the nanoparticles additives. Three different samples with different concentrations are utilized in this study. As a result, the fuel consumption, exhaust temperature, brake power, power losses and engine efficiency have been evaluated and compared to the base diesel in order to demonstrate and access the enhanced performance of the nano-fuel blend. The three concentrations conducted were 100 ppm, 200 ppm and 300 ppm of copper oxide nanoparticles. The results represented that the pure refinery diesel has low exhaust temperatures, high brake power and high efficiency as compared to the commercial diesel supplied from a gas station. In addition, 300 ppm copper oxide nano-diesel showed improvement in engine performances as compared to the other concentrations and pure diesel. In this context, lowest fuel consumption for both passenger cars and heavy duty vehicles was achieved, brake power for passenger cars only was improved and input power showed improvement however, exhaust temperature was the highest as for this fuel.
基金The National Natural Science Foundation of China(Grant No.51171006)The Key Research Project in Science and Technology of Leshan(Grant No.12GZD066)
文摘Copper oxide nanowires and nanoparticles were fabricated through electrospinning followed by calcinations in different heating conditions.It was found that the solution viscosity and environment humidity had great impact on the morphologies of precursor nanowires,and the parameters of heat treatment,including final temperature and heating rate,significantly affected the product morphologies.
