TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of...TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.展开更多
In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby ...In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby changing the length and surface roughness of the nanotubes.When the anodizing temperature is increased from 30 to 75℃,the length of the nanotubes increases from 1.459 to 4.183μm,which hinders the transfer of extracellular electrons to the electrodes.On the other hand,the surface roughness of TNA is significantly improved at higher temperatures,which is conducive to electron transfer.Therefore,samples processed at 45℃have the best current output performance.Compared with the treatment at 30℃under anodization,samples processed at 45℃can balance the resistance and roughness and have a higher electron transfer rate;the current output density of which is increased by 1.5 times,and the decolorization rate is increased by 0.8 times.Therefore,proper TNA surface morphology can improve the current output and the potential of wastewater treatment.展开更多
Thin titanium oxide nanotube arrays (TNAs) films were synthesized by anodization of titanium foil in an aqueous dimethyl sulfoxide solution using a platinum foil counter electrode.TNAs up to 6.8 μm in length,120 nm i...Thin titanium oxide nanotube arrays (TNAs) films were synthesized by anodization of titanium foil in an aqueous dimethyl sulfoxide solution using a platinum foil counter electrode.TNAs up to 6.8 μm in length,120 nm in inner pore diameter,and 20 nm in wall thickness were obtained by 40 V potentials anodization for 24 h.Their microstructures and surface morphologies were characterized by XRD,TEM,SAED and UV-vis spectroscopy.The photoelectrochemical properties of as-prepared unsensitized and dye-sensitized TNAs electrodes were examined under simulated solar light (AM 1.5,100 mW/cm2) illumination.The results showed that the photocurrent of the dye-sensitized TNAs electrodes reached 6.9 mA/cm2,which was 6 times more than that of the dye-sensitized TiO2 nanoparticles (TNPs) electrodes.It implied that the electron transport process and the charge recombination suppression within TNAs electrodes were much more favorable in comparison with that in the TNPs electrodes.Electrodes applying such kind of titania nanotubes will have a potential to further enhance the efficiencies of TNAs-based dye-sensitized solar cells.展开更多
基金ACKNOWLEDGMENTS This work was supported by the Science Foundation of Chongqing Science and Technology Committee （No.CSTS2009BB4047）, and Innovative Talent Training Project, the Third Stage of ＂211 Project＂ of Chongqing University （No.S-09109）.
文摘TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.
基金The National Major Science and Technology Project(No.2017ZX07202004-005)the Natural Science Foundation of Jiangsu Province(No.BK20171351)+2 种基金the Japan Society for the Promotion of Science(No.P 19056)the National Natural Science Foundation of China(No.51828801)the Fundamental Research Funds for the Central Universities(No.2242016K41042)。
文摘In order to investigate the effect of the surface morphology and resistance of the TiO2 semiconductor on current output,TiO2 nanotube array bio-anodes(TNA)are synthesized at different electrolyte temperatures,thereby changing the length and surface roughness of the nanotubes.When the anodizing temperature is increased from 30 to 75℃,the length of the nanotubes increases from 1.459 to 4.183μm,which hinders the transfer of extracellular electrons to the electrodes.On the other hand,the surface roughness of TNA is significantly improved at higher temperatures,which is conducive to electron transfer.Therefore,samples processed at 45℃have the best current output performance.Compared with the treatment at 30℃under anodization,samples processed at 45℃can balance the resistance and roughness and have a higher electron transfer rate;the current output density of which is increased by 1.5 times,and the decolorization rate is increased by 0.8 times.Therefore,proper TNA surface morphology can improve the current output and the potential of wastewater treatment.
基金supported by the National Natural Science Foundation of China (10904128)the Zhejiang Provincial Natural Science Foundation (Y6100171 and Y6110467)Start-up Research Foundation of Zhejiang University of Science and Technology (F501108C01)
文摘Thin titanium oxide nanotube arrays (TNAs) films were synthesized by anodization of titanium foil in an aqueous dimethyl sulfoxide solution using a platinum foil counter electrode.TNAs up to 6.8 μm in length,120 nm in inner pore diameter,and 20 nm in wall thickness were obtained by 40 V potentials anodization for 24 h.Their microstructures and surface morphologies were characterized by XRD,TEM,SAED and UV-vis spectroscopy.The photoelectrochemical properties of as-prepared unsensitized and dye-sensitized TNAs electrodes were examined under simulated solar light (AM 1.5,100 mW/cm2) illumination.The results showed that the photocurrent of the dye-sensitized TNAs electrodes reached 6.9 mA/cm2,which was 6 times more than that of the dye-sensitized TiO2 nanoparticles (TNPs) electrodes.It implied that the electron transport process and the charge recombination suppression within TNAs electrodes were much more favorable in comparison with that in the TNPs electrodes.Electrodes applying such kind of titania nanotubes will have a potential to further enhance the efficiencies of TNAs-based dye-sensitized solar cells.
