Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl ...Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl methacrylate) (PMMA)/nano-CaCO3 composite. The reaction between nano-CaCO3 and MPTMS, and the grafting of PMMA onto nano-CaCO3 were confirmed by infrared spectrum. The grafting ratio and grafting efficiency of PMMA on nano-CaCO3 modified with MPTMS were much higher than that on nano-CaCO3 modified with stearic acid. The grafting ratio of PMMA increased as the weight ratio between MMA and nano-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that nano-CaCO3 covered with PMMA was formed by in-situ emulsion polymerization.展开更多
Acid functionalized single walled carbon nanotubes （CNTs） were grafted to chitosan by first reacting the oxidized CNTs with thionyl chloride to form acyl-chlorinated CNTs. This product was subsequently dispersed in ...Acid functionalized single walled carbon nanotubes （CNTs） were grafted to chitosan by first reacting the oxidized CNTs with thionyl chloride to form acyl-chlorinated CNTs. This product was subsequently dispersed in chitosan and covalently grafted to form CNT-chitosan. CNT-chitosan was further grafted onto 3-trimethoxysilylpropyl methacrylate by free radical polymerization conditions, to yield CNT-g-chitosan-g-3-trimethoxysilylpropyl methacrylate （TMSPM）, hereafter referred to as CNT-chitosan-3-TMSPM. These composites were characterized by Fourier Transform Infrared Resonance Spectroscopy （FTIR）, carbon-13 nuclear magnetic resonance （13C NMR）, Yhermogravimetric Analysis （TGA）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The composite showed improved thermal stability and could be of great potential use in bone tissue engineering.展开更多
High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistanc...High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.展开更多
Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemb...Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemble hybrid CNT- graphene films by a blown bubble method combined with selective substrate annealing. We use polymethylmethacrylate （PMMA） as the polymeric matrix to blow bubbles containing self-assembled multi-walled CNT arrays, and then transform the bubble film into a CNT-graphene hybrid film by thermal annealing on a Cu substrate; PMMA serves as the carbon source for growing single to few-layer graphene among the CNT network until a continuously hybridized structure is formed. Compared to the bare （non-hybridized） CNT networks, the hybrid films exhibit improved electrical conductivity and structural integrity. Our method also enables the fabrication of a multi-walled CNT-Si solar cell, which has high power conversion efficiency, through the assembly of hybrid CNT-graphene structures.展开更多
To enhance the stability in humidity is very crucial to hybrid organic-inorganic lead halide perovskites in a broad range of applications. This report describes a coating stratergy of perovskite nanocrystals via poly-...To enhance the stability in humidity is very crucial to hybrid organic-inorganic lead halide perovskites in a broad range of applications. This report describes a coating stratergy of perovskite nanocrystals via poly- methylmethacrylate-introdnced ligand-assisted reprecipita- tion, using the interactions between the Pb cations on the surface of perovskite nanocrystals and the functional ester carbonyl groups in polymethylmethacrylate framework. The hydrophobic framework shields the open metal sites of hybrid organic-inorganic lead halide perovskites from being attacked by water, effectively retarding the diffusion of water into the perovskite nanocrystals. The as-prepared films demonstrate high resistance to heat and moisture. Additionally, the in- troduction of polymethylmethacrylate into ligand-assisted reprecipitation can effectively control the bulk precipitation and promote the stability of the perovskite solution.展开更多
文摘Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl methacrylate) (PMMA)/nano-CaCO3 composite. The reaction between nano-CaCO3 and MPTMS, and the grafting of PMMA onto nano-CaCO3 were confirmed by infrared spectrum. The grafting ratio and grafting efficiency of PMMA on nano-CaCO3 modified with MPTMS were much higher than that on nano-CaCO3 modified with stearic acid. The grafting ratio of PMMA increased as the weight ratio between MMA and nano-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that nano-CaCO3 covered with PMMA was formed by in-situ emulsion polymerization.
文摘Acid functionalized single walled carbon nanotubes （CNTs） were grafted to chitosan by first reacting the oxidized CNTs with thionyl chloride to form acyl-chlorinated CNTs. This product was subsequently dispersed in chitosan and covalently grafted to form CNT-chitosan. CNT-chitosan was further grafted onto 3-trimethoxysilylpropyl methacrylate by free radical polymerization conditions, to yield CNT-g-chitosan-g-3-trimethoxysilylpropyl methacrylate （TMSPM）, hereafter referred to as CNT-chitosan-3-TMSPM. These composites were characterized by Fourier Transform Infrared Resonance Spectroscopy （FTIR）, carbon-13 nuclear magnetic resonance （13C NMR）, Yhermogravimetric Analysis （TGA）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The composite showed improved thermal stability and could be of great potential use in bone tissue engineering.
文摘High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.
基金This work was financially supported by the National Nature Science Foundation of China （Nos. 91127004 and 51325202）.
文摘Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemble hybrid CNT- graphene films by a blown bubble method combined with selective substrate annealing. We use polymethylmethacrylate （PMMA） as the polymeric matrix to blow bubbles containing self-assembled multi-walled CNT arrays, and then transform the bubble film into a CNT-graphene hybrid film by thermal annealing on a Cu substrate; PMMA serves as the carbon source for growing single to few-layer graphene among the CNT network until a continuously hybridized structure is formed. Compared to the bare （non-hybridized） CNT networks, the hybrid films exhibit improved electrical conductivity and structural integrity. Our method also enables the fabrication of a multi-walled CNT-Si solar cell, which has high power conversion efficiency, through the assembly of hybrid CNT-graphene structures.
基金supported by the Thousand Young Talents Programthe National Natural Science Foundation of China (21422507,21635002 and 21321003)
文摘To enhance the stability in humidity is very crucial to hybrid organic-inorganic lead halide perovskites in a broad range of applications. This report describes a coating stratergy of perovskite nanocrystals via poly- methylmethacrylate-introdnced ligand-assisted reprecipita- tion, using the interactions between the Pb cations on the surface of perovskite nanocrystals and the functional ester carbonyl groups in polymethylmethacrylate framework. The hydrophobic framework shields the open metal sites of hybrid organic-inorganic lead halide perovskites from being attacked by water, effectively retarding the diffusion of water into the perovskite nanocrystals. The as-prepared films demonstrate high resistance to heat and moisture. Additionally, the in- troduction of polymethylmethacrylate into ligand-assisted reprecipitation can effectively control the bulk precipitation and promote the stability of the perovskite solution.
