由于跟踪过程目标不规则形变的影响,采用固定纵横比的尺度模型无法精确地估计目标的尺度.为解决该问题,本文提出基于纵横比自适应的相关滤波跟踪算法.基于fDSST(fast Discriminative Scale Space Tracking)算法,训练学习纵横比模型,更...由于跟踪过程目标不规则形变的影响,采用固定纵横比的尺度模型无法精确地估计目标的尺度.为解决该问题,本文提出基于纵横比自适应的相关滤波跟踪算法.基于fDSST(fast Discriminative Scale Space Tracking)算法,训练学习纵横比模型,更新目标的纵横比,获取更精确的目标尺度.在此基础上,本文设计了平滑修正方案以及学习率自适应机制,可以有效地缓解因目标出现遮挡导致的模型漂移问题.在OTB100、VOT2016和VOT2018数据集上与其他跟踪算法进行对比实验,结果表明本文算法改善了基准算法的性能,特别是在OTB100上的总体准确率和成功率比fDSST提高了9.6%和6.2%.展开更多
High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effect...High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques.This study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio.Unlike conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving tool.The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation.Thanks to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling off.Since one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of EV-chiseling.Next,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process parameters.Then,surface texturing tests are performed on copper to verify the efficacy of EV-chiseling.Uniformed micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on copper.Compared with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times.The experimental results also verify the accuracy of the developed surface generation model of microstructures.Finally,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.展开更多
Objective: Describe the psychosocial aspects of male infertility at the hospital of the Sino-Guinean Friendship. Patients and method: It is a prospective study of a descriptive type covering a period of 6 months. The ...Objective: Describe the psychosocial aspects of male infertility at the hospital of the Sino-Guinean Friendship. Patients and method: It is a prospective study of a descriptive type covering a period of 6 months. The study covered 17 patients, all received for a desire to conceive after at least one year of regular sexual intercourse without contraception. The data were collected from patient interviews using a pre-established questionnaire. Results: The average age of the patients was 32.07 years with extremes of 23 years and 42 years. During this study, 64.70% of patients were no longer participating in community ceremonies. The patients’ relationships with their spouse and family deteriorated in 52.94% and 47.06%, respectively. Conversely, relations with the family of origin remained unchanged in 70.59 percent of cases. The reduction in economic activity was by 13 patients (76.48%). Conclusion: Male infertility causes a real psychic earthquake in men with its corollaries of negative feelings. The rather complex moral repercussions of male infertility affect not only the individual, his/her partner, and family, but also economic activity.展开更多
文摘由于跟踪过程目标不规则形变的影响,采用固定纵横比的尺度模型无法精确地估计目标的尺度.为解决该问题,本文提出基于纵横比自适应的相关滤波跟踪算法.基于fDSST(fast Discriminative Scale Space Tracking)算法,训练学习纵横比模型,更新目标的纵横比,获取更精确的目标尺度.在此基础上,本文设计了平滑修正方案以及学习率自适应机制,可以有效地缓解因目标出现遮挡导致的模型漂移问题.在OTB100、VOT2016和VOT2018数据集上与其他跟踪算法进行对比实验,结果表明本文算法改善了基准算法的性能,特别是在OTB100上的总体准确率和成功率比fDSST提高了9.6%和6.2%.
基金supported by National Natural Science Foundation of China(No.61806006)Jiangsu University Superior Discipline Construction ProjectTalent Introduction Project(No.B12018)。
基金support for this research provided by the National Natural Science Foundation of China(Grant No.52105458)Beijing Natural Science Foundation(Grant No.3222009)+1 种基金Huaneng Group Science and Technology Research Project(No:HNKJ22-H105)China Postdoctoral Science Foundation(Grant No.2022M711807)。
文摘High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques.This study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio.Unlike conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving tool.The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation.Thanks to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling off.Since one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of EV-chiseling.Next,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process parameters.Then,surface texturing tests are performed on copper to verify the efficacy of EV-chiseling.Uniformed micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on copper.Compared with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times.The experimental results also verify the accuracy of the developed surface generation model of microstructures.Finally,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.
文摘Objective: Describe the psychosocial aspects of male infertility at the hospital of the Sino-Guinean Friendship. Patients and method: It is a prospective study of a descriptive type covering a period of 6 months. The study covered 17 patients, all received for a desire to conceive after at least one year of regular sexual intercourse without contraception. The data were collected from patient interviews using a pre-established questionnaire. Results: The average age of the patients was 32.07 years with extremes of 23 years and 42 years. During this study, 64.70% of patients were no longer participating in community ceremonies. The patients’ relationships with their spouse and family deteriorated in 52.94% and 47.06%, respectively. Conversely, relations with the family of origin remained unchanged in 70.59 percent of cases. The reduction in economic activity was by 13 patients (76.48%). Conclusion: Male infertility causes a real psychic earthquake in men with its corollaries of negative feelings. The rather complex moral repercussions of male infertility affect not only the individual, his/her partner, and family, but also economic activity.
