In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that,...In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that, when the gauge is 1 nun, most parameters of card sliver quality are better when voltage is 600 V than those when no voltage is applied. The contents of nep, trash, visible foreign matter （VFM） and short fiber content by number （SFCn）, short fiber content by weight （SFCw）, immature fiber content （IFC） of card sliver decrease by 5.9%, 16.7%, 12.5%, 5.3%, 4.8% and 1.6%, respectively, but seed coat nep （SCN） content of card sliver doesn＇t decrease. When the electrostatic plate gauge is 2 mm and electrostatic voltage is 4000 V, the removal efficiency of neps and SCN is remarkable, decreasing by 8.7% and 25% respectively. Card sliver quality is hardly improved under any voltage when the gauge between electrostatic plate and cylinder is 3mm.展开更多
This paper reports the evolution of textile structure and mechanical properties of vascular prosthesis in the level of the whole prosthesis and the constituent filaments with respect to the manufacturing process. The ...This paper reports the evolution of textile structure and mechanical properties of vascular prosthesis in the level of the whole prosthesis and the constituent filaments with respect to the manufacturing process. The tubular wall of the prosthesis is divided circumferentially into three zones; basic line (BL), remeshing line ( RL) and guide line ( GL). Some heterogeneity has been observed on the tubular wall in terms of stitch structure of the prosthesis and linear density of the constituent filaments. The breaking position of the prosthesis under circumferential tensile localizes preferentially in remeshing line that is the weakest zone by warp knitting with double needle bed. Furthermore, the statistical differences of the mechanical properties of the filaments of zone RL, GL and BL have been confirmed too. It is predictable that the deterioration of prosthesis, under physiological loads (periodical pulse blood pressure etc.), could happen firstly in the weaker zone in vivo.展开更多
In this study,the sol-gel method was introduced to prepare the composite phase change material (CPCM). The CPCM was added to fabric with coating techniques and the thermal activity of modified fabric was studied. In a...In this study,the sol-gel method was introduced to prepare the composite phase change material (CPCM). The CPCM was added to fabric with coating techniques and the thermal activity of modified fabric was studied. In addition,the thermal property and the microstructure of CPCM were also discussed in detail by means of polarization microscope and differential scanning calorimeter,respectively. According to the analysis of main influencial factors of the property of CPCM,the optimal preparing technique was determined. It was proved that CPCM could exhibit a good thermal property while phase transformation process took place,and a better appearance of the fabric modified with CPCM could be obtained due to the fact that in a warm circumstance,the liquid-state phase change material could be firmly enwrapped and embedded in the three-dimensional network all the time during the phase transformation. Besides,the fabric treated with CPCM had a high phase-transition enthalpy and an appropriate phase-transition temperature. As a result,a desirable temperature-adjustable function appeared.展开更多
The methods in testing the bean-protein fiber and the standards used were simply introduced. The fiber's mechanical and chemical performances were further analyzed. And the correlative performance of the bean-prot...The methods in testing the bean-protein fiber and the standards used were simply introduced. The fiber's mechanical and chemical performances were further analyzed. And the correlative performance of the bean-protein fibers and other natural fibers have been compared, then full knowledge of the fiber's performance was concluded.展开更多
Three-dimensional Rotational Microscopy was used to take the photos of the fabrics. Three categories of yarn appearance diameters in the worsted fabrics were discussed. The fabrics were grouped into two to explore the...Three-dimensional Rotational Microscopy was used to take the photos of the fabrics. Three categories of yarn appearance diameters in the worsted fabrics were discussed. The fabrics were grouped into two to explore the relationships between yam appearance diameters at the interlacing points, opening points, and the calculated yam diameters. The correlations between the appearance diameters and fabric parameters were given, and the results showed that the calculated yam diameter and warp cover factor had a very big influence on yam appearance diameter. The equations expressing the relationship between yam appearance diameters and fabric parameters are established using step-regression method. The validation of the equations for one type of fabrics shows a good accuracy with the average error below 9% except the weft fdaments exceeding 22%.展开更多
基金Supported by Fund of Scientific and Technological Key Project Plan of Liaoning Province , China(No.2003220026)Fund of Education Depart ment of Liaoning Province,China(No.05L147)
文摘In order to find the effect of state device installed on a carding machine on card sliver quality, card slivers produced in conditions of different voltages and gauges were tested by USTER AFIS. The results show that, when the gauge is 1 nun, most parameters of card sliver quality are better when voltage is 600 V than those when no voltage is applied. The contents of nep, trash, visible foreign matter （VFM） and short fiber content by number （SFCn）, short fiber content by weight （SFCw）, immature fiber content （IFC） of card sliver decrease by 5.9%, 16.7%, 12.5%, 5.3%, 4.8% and 1.6%, respectively, but seed coat nep （SCN） content of card sliver doesn＇t decrease. When the electrostatic plate gauge is 2 mm and electrostatic voltage is 4000 V, the removal efficiency of neps and SCN is remarkable, decreasing by 8.7% and 25% respectively. Card sliver quality is hardly improved under any voltage when the gauge between electrostatic plate and cylinder is 3mm.
基金Funded by the Shanghai Post Doctoral Foundation Overseas Returned Scholars' Foundation of Education Ministry the Shanghai Key Discipline Project
文摘This paper reports the evolution of textile structure and mechanical properties of vascular prosthesis in the level of the whole prosthesis and the constituent filaments with respect to the manufacturing process. The tubular wall of the prosthesis is divided circumferentially into three zones; basic line (BL), remeshing line ( RL) and guide line ( GL). Some heterogeneity has been observed on the tubular wall in terms of stitch structure of the prosthesis and linear density of the constituent filaments. The breaking position of the prosthesis under circumferential tensile localizes preferentially in remeshing line that is the weakest zone by warp knitting with double needle bed. Furthermore, the statistical differences of the mechanical properties of the filaments of zone RL, GL and BL have been confirmed too. It is predictable that the deterioration of prosthesis, under physiological loads (periodical pulse blood pressure etc.), could happen firstly in the weaker zone in vivo.
基金Fujian Province I mportant Science and Technology Development Fund,China (No.2005Z17)
文摘In this study,the sol-gel method was introduced to prepare the composite phase change material (CPCM). The CPCM was added to fabric with coating techniques and the thermal activity of modified fabric was studied. In addition,the thermal property and the microstructure of CPCM were also discussed in detail by means of polarization microscope and differential scanning calorimeter,respectively. According to the analysis of main influencial factors of the property of CPCM,the optimal preparing technique was determined. It was proved that CPCM could exhibit a good thermal property while phase transformation process took place,and a better appearance of the fabric modified with CPCM could be obtained due to the fact that in a warm circumstance,the liquid-state phase change material could be firmly enwrapped and embedded in the three-dimensional network all the time during the phase transformation. Besides,the fabric treated with CPCM had a high phase-transition enthalpy and an appropriate phase-transition temperature. As a result,a desirable temperature-adjustable function appeared.
文摘The methods in testing the bean-protein fiber and the standards used were simply introduced. The fiber's mechanical and chemical performances were further analyzed. And the correlative performance of the bean-protein fibers and other natural fibers have been compared, then full knowledge of the fiber's performance was concluded.
文摘Three-dimensional Rotational Microscopy was used to take the photos of the fabrics. Three categories of yarn appearance diameters in the worsted fabrics were discussed. The fabrics were grouped into two to explore the relationships between yam appearance diameters at the interlacing points, opening points, and the calculated yam diameters. The correlations between the appearance diameters and fabric parameters were given, and the results showed that the calculated yam diameter and warp cover factor had a very big influence on yam appearance diameter. The equations expressing the relationship between yam appearance diameters and fabric parameters are established using step-regression method. The validation of the equations for one type of fabrics shows a good accuracy with the average error below 9% except the weft fdaments exceeding 22%.
