Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile ...Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile fibers and multi-variance fibers used in textile industry, the properties of above two kinds of differential polyester filaments after drawing in different heat conditions were studied. Finally following conclusions were obtained: Firstly, the tenacity and elongation at break decreases with the rise of Tp. Secondly, the tenacity rises but the elongation at break decreases with the increase of Tb. Then, when the Tb is low, both the shrinkage in boiling water and hi hot air decreases with the rise of Tp, while, when the Tb is high, both the shrinkage rises with the rise of Tp. The last, both the shrinkage decreases with the rise of Tb.展开更多
Warp is a nonlinear viscoelastic material. The loom efficiency was reduced considerably by the increase of the frequency of weak places in the warp. Warp should vibrate with low-frequency to reduce the friction times....Warp is a nonlinear viscoelastic material. The loom efficiency was reduced considerably by the increase of the frequency of weak places in the warp. Warp should vibrate with low-frequency to reduce the friction times. The objective of this research was to establish the transverse/longitudinal vibration differential equations of warp and analyze the fluctuation process of warp movement by nonlinear method. Based on variable separation method, the time variable was separated from space variable, and the numerical solutions of vibration equations were obtained by the fourth-order Runge-Kutta method. Finally, the influencing factors and variable trends on warp vibration were discussed. The methods on control warp vibration were introduced, which could guide the engineering practice. The most important way to reduce warp vibration is quick adjustment of warp tension.展开更多
Adsorption is an important process in wastewater treatment,and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon.This study investigat...Adsorption is an important process in wastewater treatment,and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon.This study investigated the adsorption behaviour of Reactive Black 5（RB5）and methylene blue（MB）onto activated carbon produced from textile sludge（TSAC）.The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650℃ under nitrogen flow.Effects of time（0–200 min）,pH（2–10）,temperature（25–60℃）,initial dye concentration（0–200 mg·L^-1）,and adsorbent dosage（0.01–0.15 g）on dye removal efficiency were investigated.Preliminary screening revealed that TSAC synthesized via H2SO4activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl2.The adsorption capacity of TSAC was found to be 11.98 mg·g^-1（RB5）and 13.27 mg·g^-1（MB）,and is dependent on adsorption time and initial dye concentration.The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface.The dye adsorption obeyed pseudo-second order kinetic model,thus chemisorption was the controlling step.This study reveals potential of textile sludge in removal of dyes from aqueous solution,and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.展开更多
The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specifi...The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.展开更多
This experiment researches textile wastewater, adopts a BAF process that has developed quickly in recent years, and makes use of dissolved air flotation as a pretreatment process that can effectively make up for BAF’...This experiment researches textile wastewater, adopts a BAF process that has developed quickly in recent years, and makes use of dissolved air flotation as a pretreatment process that can effectively make up for BAF’s lack of removing Chromaticity color. Performance effect, influencing factor, control condition have been reviewed and parameters of correlation have been analyzed in this experiment. The experiment and actual performance results indicate that this process is an effective way to remove the COD, suspended solid and colority with the value of 100 mg/L, 50 mg/L and 70 multiple respectively. The effluent meets the requirement of the standards of national sewage discharge. This process features a simple schematic, small location, continuous, reliable performance, strong shock and loading resistance and easy operation. Experimental data can provide scientific evidence and technical support for engineering practice of this process.展开更多
文摘Many properties of polyester filaments such as heat shrinkage, tenacity, elongation at break and etc. are greatly influenced by drawing, so post-drawing is important in downstream processing. As more and more profile fibers and multi-variance fibers used in textile industry, the properties of above two kinds of differential polyester filaments after drawing in different heat conditions were studied. Finally following conclusions were obtained: Firstly, the tenacity and elongation at break decreases with the rise of Tp. Secondly, the tenacity rises but the elongation at break decreases with the increase of Tb. Then, when the Tb is low, both the shrinkage in boiling water and hi hot air decreases with the rise of Tp, while, when the Tb is high, both the shrinkage rises with the rise of Tp. The last, both the shrinkage decreases with the rise of Tb.
基金Natural Science Foundation of Shaanxi Province,China(No. 09JK456)
文摘Warp is a nonlinear viscoelastic material. The loom efficiency was reduced considerably by the increase of the frequency of weak places in the warp. Warp should vibrate with low-frequency to reduce the friction times. The objective of this research was to establish the transverse/longitudinal vibration differential equations of warp and analyze the fluctuation process of warp movement by nonlinear method. Based on variable separation method, the time variable was separated from space variable, and the numerical solutions of vibration equations were obtained by the fourth-order Runge-Kutta method. Finally, the influencing factors and variable trends on warp vibration were discussed. The methods on control warp vibration were introduced, which could guide the engineering practice. The most important way to reduce warp vibration is quick adjustment of warp tension.
基金the Ministry of Higher Education,Malaysia(MOHE)for the financial supports received under University Grant(08H05)and Fundamental Research Grant Scheme(4F872)Universiti Teknologi Malaysia for the GUP grant No.17H65the support to the main author,Wong Syie Luing,in the form of Post-Doctoral Fellowship Scheme for the project"Catalytic Cracking of Low Density Polyethylene Waste to Liquid Fuels in Fixed Bed Reactor"
文摘Adsorption is an important process in wastewater treatment,and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon.This study investigated the adsorption behaviour of Reactive Black 5（RB5）and methylene blue（MB）onto activated carbon produced from textile sludge（TSAC）.The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650℃ under nitrogen flow.Effects of time（0–200 min）,pH（2–10）,temperature（25–60℃）,initial dye concentration（0–200 mg·L^-1）,and adsorbent dosage（0.01–0.15 g）on dye removal efficiency were investigated.Preliminary screening revealed that TSAC synthesized via H2SO4activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl2.The adsorption capacity of TSAC was found to be 11.98 mg·g^-1（RB5）and 13.27 mg·g^-1（MB）,and is dependent on adsorption time and initial dye concentration.The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface.The dye adsorption obeyed pseudo-second order kinetic model,thus chemisorption was the controlling step.This study reveals potential of textile sludge in removal of dyes from aqueous solution,and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.
文摘The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.
文摘This experiment researches textile wastewater, adopts a BAF process that has developed quickly in recent years, and makes use of dissolved air flotation as a pretreatment process that can effectively make up for BAF’s lack of removing Chromaticity color. Performance effect, influencing factor, control condition have been reviewed and parameters of correlation have been analyzed in this experiment. The experiment and actual performance results indicate that this process is an effective way to remove the COD, suspended solid and colority with the value of 100 mg/L, 50 mg/L and 70 multiple respectively. The effluent meets the requirement of the standards of national sewage discharge. This process features a simple schematic, small location, continuous, reliable performance, strong shock and loading resistance and easy operation. Experimental data can provide scientific evidence and technical support for engineering practice of this process.
