A modified reduced-order method for RC networks which takes a division-and-conquest strategy is presented.The whole network is partitioned into a set of sub-networks at first,then each of them is reduced by Krylov sub...A modified reduced-order method for RC networks which takes a division-and-conquest strategy is presented.The whole network is partitioned into a set of sub-networks at first,then each of them is reduced by Krylov subspace techniques,and finally all the reduced sub-networks are incorporated together.With some accuracy,this method can reduce the number of both nodes and components of the circuit comparing to the traditional methods which usually only offer a reduced net with less nodes.This can markedly accelerate the sparse-matrix-based simulators whose performance is dominated by the entity of the matrix or the number of components of the circuits.展开更多
A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced w...A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced which can distinguish six freedom degrees of optical probe to realize coordinate measurement of the object surface. The effects of some factors on the resolution of the system are analyzed. The simulating experiments have shown that the system model is available.展开更多
A restricted edge cut is an edge cut of a connected graph whose removal resultsin a disconnected graph without isolated vertices. The size of a minimum restricted edge cutof a graph G is called its restricted edge con...A restricted edge cut is an edge cut of a connected graph whose removal resultsin a disconnected graph without isolated vertices. The size of a minimum restricted edge cutof a graph G is called its restricted edge connectivity, and is denoted by λ′(G). Let ξ(G) bethe minimum edge degree of graph G. It is known that λ′(G) ≤ξ(G) if G contains restrictededge cuts. Graph G is called maximal restricted edge connected if the equality holds in thethe preceding inequality. In this paper, undirected Kautz graph UK(2, n) is proved to bemaximal restricted edge connected if n ≥ 2.展开更多
A two-stage method for image segmentation based on edge and region information is proposed. Different deformation schemes are used at two stages for segmenting the object correctly in image plane. At the first stage, ...A two-stage method for image segmentation based on edge and region information is proposed. Different deformation schemes are used at two stages for segmenting the object correctly in image plane. At the first stage, the contour of the model is divided into several segments hierarchically that deform respectively using affine transformation. After the contour is deformed to the approximate boundary of object, a fine match mechanism using statistical information of local region to redefine the external energy of the model is used to make the contour fit the object's boundary exactly. The algorithm is effective, as the hierarchical segmental deformation makes use of the globe and local information of the image, the affine transformation keeps the consistency of the model, and the reformative approaches of computing the internal energy and external energy are proposed to reduce the algorithm complexity. The adaptive method of defining the search area at the second stage makes the model converge quickly. The experimental results indicate that the proposed model is effective and robust to local minima and able to search for concave objects.展开更多
The Gauss-Seidel method is effective to solve the traditional sparse linear system. In the paper, we define a class of sparse linear systems in iterative algorithm. The iterative method for linear system can be extend...The Gauss-Seidel method is effective to solve the traditional sparse linear system. In the paper, we define a class of sparse linear systems in iterative algorithm. The iterative method for linear system can be extended to the dummy sparse linear system. We apply the Gauss-Seidel method, which is one of the iterative methods for linear system, to the thermal model of floorplan of VLSI physical design. The experimental results of dummy sparse linear system are computed by using Gauss-Seidel method that have shown our theory analysis and extendibility. The iterative time of our incremental thermal model is 5 times faster than that of the inverting matrix method.展开更多
Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the aut...Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the authors for podded propulsors, a ship model towing tank, and under water particle image velocimetry （PIV） measurement systems. Under the three types of conditions, the main parameters of an L-type podded propulsor were measured, including the propeller thrust and torque, as well as the thrust, side force, and moment of the whole pod unit.In addition, the flow field on the section between the propeller and the strut was analyzed. Experimental results demonstrate that the dynamic azimuthing rate and direction and the turning direction affect the forces on the propeller and the whole pod unit. Forces are asymmetrically distributed between the left and right azimuthing directions because of the effect of propeller rotation. The findings of this study provide a foundation for further research on L-type podded propulsors.展开更多
The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous ...The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous rate-based kinetic model and the NRTL activity coefficient model. The results show that the unstable node branch emerges from the ethyl acetate/water edge, moving toward the chemical equilibrium surface with the increase of Damkoeler value （D）, and the node reaches the ternary reactive azeotrope when D-∞ eventually. Conceptual design for the ethyl acetate synthesis of reactive distillation based on the residue curve maps is presented at last.展开更多
In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this ...In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this model, we establish a variety of exact solutions. To study the exact solutions, we used a fractional complex transform to convert the particular partial differential equation of fractional order into corresponding partial differential equation and modified exp-function method is implemented to investigate the nonlinear equation. Graphical demonstrations along with the numerical data reinforce the efficacy of the used procedure. The specified idea is very effective, unfailing, well-organized and pragmatic for fractional PDEs and could be protracted to further physical happenings.展开更多
文摘科技期刊电脑排版已越来越普遍了,但科技论文中的插图往往还是手工绘制,费时费力,效果还不一定理想。即使有的刊物采用扫描制图,仍需根据作者原图按照版式要求精心绘制,然后扫描输入。与前者不同的只是无需将文字和图分别出片后再划块拼版。如果能利用图像处理软件在电脑中对图像进行修改处理,就可将作者原图直接扫描输入电脑后再按刊物要求作进一步的编辑加工,从而摆脱手工绘制、文字粘贴、复印缩放、单独拍照和图文拼版等工序。Photoshop 4.0是建立在 Windows
文摘A modified reduced-order method for RC networks which takes a division-and-conquest strategy is presented.The whole network is partitioned into a set of sub-networks at first,then each of them is reduced by Krylov subspace techniques,and finally all the reduced sub-networks are incorporated together.With some accuracy,this method can reduce the number of both nodes and components of the circuit comparing to the traditional methods which usually only offer a reduced net with less nodes.This can markedly accelerate the sparse-matrix-based simulators whose performance is dominated by the entity of the matrix or the number of components of the circuits.
文摘A new vision coordinate measuring system--single camera 3 D coordinate measuring system based on optical probe imaging is presented. A new idea in vision coordinate measurement is proposed. A linear model is deduced which can distinguish six freedom degrees of optical probe to realize coordinate measurement of the object surface. The effects of some factors on the resolution of the system are analyzed. The simulating experiments have shown that the system model is available.
基金Supported by the NNSF of China(10271105) Supported by the NSF of Fujian EducationMinistry(JA03145) Supported by the NNSF of China(10071080)
文摘A restricted edge cut is an edge cut of a connected graph whose removal resultsin a disconnected graph without isolated vertices. The size of a minimum restricted edge cutof a graph G is called its restricted edge connectivity, and is denoted by λ′(G). Let ξ(G) bethe minimum edge degree of graph G. It is known that λ′(G) ≤ξ(G) if G contains restrictededge cuts. Graph G is called maximal restricted edge connected if the equality holds in thethe preceding inequality. In this paper, undirected Kautz graph UK(2, n) is proved to bemaximal restricted edge connected if n ≥ 2.
基金Sponsored by Shanghai Leading Academic Discipline Project(Grant No T0603)the National Natural Science Foundation of China (Grant No60271033)
文摘A two-stage method for image segmentation based on edge and region information is proposed. Different deformation schemes are used at two stages for segmenting the object correctly in image plane. At the first stage, the contour of the model is divided into several segments hierarchically that deform respectively using affine transformation. After the contour is deformed to the approximate boundary of object, a fine match mechanism using statistical information of local region to redefine the external energy of the model is used to make the contour fit the object's boundary exactly. The algorithm is effective, as the hierarchical segmental deformation makes use of the globe and local information of the image, the affine transformation keeps the consistency of the model, and the reformative approaches of computing the internal energy and external energy are proposed to reduce the algorithm complexity. The adaptive method of defining the search area at the second stage makes the model converge quickly. The experimental results indicate that the proposed model is effective and robust to local minima and able to search for concave objects.
文摘The Gauss-Seidel method is effective to solve the traditional sparse linear system. In the paper, we define a class of sparse linear systems in iterative algorithm. The iterative method for linear system can be extended to the dummy sparse linear system. We apply the Gauss-Seidel method, which is one of the iterative methods for linear system, to the thermal model of floorplan of VLSI physical design. The experimental results of dummy sparse linear system are computed by using Gauss-Seidel method that have shown our theory analysis and extendibility. The iterative time of our incremental thermal model is 5 times faster than that of the inverting matrix method.
基金Foundation item： Supported by the National Natural Science Foundation of China （Grant Nos. 41176074, 51379043 and 51409063）Acknowledgement This project was supported by the National Natural Science Foundation of China （Grant Nos. 41176074,51379043 and 51409063） and was conducted in response to the great support received from a basic research project entitled ＂Multihull Ship Technology Key Laboratory of Fundamental Science for National Defence＂, which was conducted at Harbin Engineering University. The authors would like to extend their sincere gratitude to their colleagues in the towing tank laboratory.
文摘Experimental tests were conducted to evaluate the hydrodynamic performance of an L-type podded propulsor in straight-ahead motion and off-design conditions using an open-water measuring instrument developed by the authors for podded propulsors, a ship model towing tank, and under water particle image velocimetry （PIV） measurement systems. Under the three types of conditions, the main parameters of an L-type podded propulsor were measured, including the propeller thrust and torque, as well as the thrust, side force, and moment of the whole pod unit.In addition, the flow field on the section between the propeller and the strut was analyzed. Experimental results demonstrate that the dynamic azimuthing rate and direction and the turning direction affect the forces on the propeller and the whole pod unit. Forces are asymmetrically distributed between the left and right azimuthing directions because of the effect of propeller rotation. The findings of this study provide a foundation for further research on L-type podded propulsors.
基金Project(2008-XY-6) supported by the Development of Science and Technology Start-up Fund of Fuzhou University, ChinaProject(XRC-0826) supported by the Talents Fund of Fuzhou University, China
文摘The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous rate-based kinetic model and the NRTL activity coefficient model. The results show that the unstable node branch emerges from the ethyl acetate/water edge, moving toward the chemical equilibrium surface with the increase of Damkoeler value （D）, and the node reaches the ternary reactive azeotrope when D-∞ eventually. Conceptual design for the ethyl acetate synthesis of reactive distillation based on the residue curve maps is presented at last.
文摘In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this model, we establish a variety of exact solutions. To study the exact solutions, we used a fractional complex transform to convert the particular partial differential equation of fractional order into corresponding partial differential equation and modified exp-function method is implemented to investigate the nonlinear equation. Graphical demonstrations along with the numerical data reinforce the efficacy of the used procedure. The specified idea is very effective, unfailing, well-organized and pragmatic for fractional PDEs and could be protracted to further physical happenings.
