As the spring equation is limited to the accuracy of mill stiffness and the linearity of the mill spring curve, the traditional gaugemeter automatic gauge control(GM-AGC) system based on spring equation cannot meet th...As the spring equation is limited to the accuracy of mill stiffness and the linearity of the mill spring curve, the traditional gaugemeter automatic gauge control(GM-AGC) system based on spring equation cannot meet the requirements of practical production. In allusion to this problem, a kind of novel GM-AGC system based on mill stretch characteristic curve was proposed. The error existing in calculating strip thickness by spring equation were analyzed first. And then the mill stretch characteristic curve which could effectively eliminate the influence of mill stiffness was described. The novel GM-AGC system has been applied successfully in a hot strip mill, the application results show that the thickness control precision is improved significantly, with the novel GM-AGC system, over 98.6% of the strip thickness deviation of 3.0 mm class can be controlled within the target tolerances of ±20 μm.展开更多
This paper focused on the crystal structures of two new ternary phases,Ti(Cu,Pt)2 and Ti(Cu,Pt)3,which were studied by X-ray powder diffraction data using Rietveld method.Electron probe microanalysis was used for samp...This paper focused on the crystal structures of two new ternary phases,Ti(Cu,Pt)2 and Ti(Cu,Pt)3,which were studied by X-ray powder diffraction data using Rietveld method.Electron probe microanalysis was used for sample composition examination.Elastic properties of these phases were further measured by nano-indentation,and meanwhile calculated with first-principle(FP)calculations.It is found that the crystal structure of Ti(Cu,Pt)2 is of orthorhombic cell space group Amm2(No.38)with structural prototype of VAu2.The resolved structure of Ti(Cu,Pt)3 is of tetragonal Al Pt3 type,belonging to the space group P4/mmm(No.123).The nano-indentation measurement and FP calculations show that the elastic modulus of Ti(Cu,Pt)2 increases firstly then decreases with Pt content,whereas that of Ti(Cu,Pt)3almost linearly increases with Pt content.展开更多
The nonlinear aeroelastic system of an airfoil with an external store was investigated,with emphasis on the bounds of limit cycle oscillations(LCOs).Based on the equivalent linearization,an approach was proposed to ca...The nonlinear aeroelastic system of an airfoil with an external store was investigated,with emphasis on the bounds of limit cycle oscillations(LCOs).Based on the equivalent linearization,an approach was proposed to calculate the bounds on LCOs over the full flight envelope.The bounds are determined directly without solving LCOs one by one as the flow speed varies.The presented approach can provide us with the maximal LCO amplitudes and the lower threshold for flow speed beyond which LCOs may arise.Numerical examples show that the obtained bounds are in nice agreement with numerical simulation results.The speed threshold can be predicted to a relative error less than 0.1%,and the maximal LCO amplitude to about 3%.The influences of the system parameters on the speed threshold for speed were investigated efficiently by the proposed approach.展开更多
Based on the crystal plasticity theory and interatomic potential, in this paper a new thermo-elasto-plasticity constitutive model is proposed to study the behavior of metal crystals at finite temperature. By applying ...Based on the crystal plasticity theory and interatomic potential, in this paper a new thermo-elasto-plasticity constitutive model is proposed to study the behavior of metal crystals at finite temperature. By applying the present constitutive model, the stress-strain curves under uniaxial tension at different temperatures are calculated for the typical crystal A1, and the calculated results are compared with the experimental results. From the comparisons, it can be seen that the present theory has the capability to describe the thermo-elasto-plastic behavior of metal crystals at finite temperature through a concise and explicit calculation process.展开更多
基金Project(51074051) supported by the National Natural Science Foundation of ChinaProject(N110307001) supported by the Fundamental Research Funds for the Central Universities,China
文摘As the spring equation is limited to the accuracy of mill stiffness and the linearity of the mill spring curve, the traditional gaugemeter automatic gauge control(GM-AGC) system based on spring equation cannot meet the requirements of practical production. In allusion to this problem, a kind of novel GM-AGC system based on mill stretch characteristic curve was proposed. The error existing in calculating strip thickness by spring equation were analyzed first. And then the mill stretch characteristic curve which could effectively eliminate the influence of mill stiffness was described. The novel GM-AGC system has been applied successfully in a hot strip mill, the application results show that the thickness control precision is improved significantly, with the novel GM-AGC system, over 98.6% of the strip thickness deviation of 3.0 mm class can be controlled within the target tolerances of ±20 μm.
基金Projects(2016YFB07014042016YFB0701301)supported by the National Key Research and Development Program of China。
文摘This paper focused on the crystal structures of two new ternary phases,Ti(Cu,Pt)2 and Ti(Cu,Pt)3,which were studied by X-ray powder diffraction data using Rietveld method.Electron probe microanalysis was used for sample composition examination.Elastic properties of these phases were further measured by nano-indentation,and meanwhile calculated with first-principle(FP)calculations.It is found that the crystal structure of Ti(Cu,Pt)2 is of orthorhombic cell space group Amm2(No.38)with structural prototype of VAu2.The resolved structure of Ti(Cu,Pt)3 is of tetragonal Al Pt3 type,belonging to the space group P4/mmm(No.123).The nano-indentation measurement and FP calculations show that the elastic modulus of Ti(Cu,Pt)2 increases firstly then decreases with Pt content,whereas that of Ti(Cu,Pt)3almost linearly increases with Pt content.
基金supported by the National Natural Science Foundation of China(Grant Nos.11002088,11272361)the Innovation Foundation for PhD Graduates of SYSU
文摘The nonlinear aeroelastic system of an airfoil with an external store was investigated,with emphasis on the bounds of limit cycle oscillations(LCOs).Based on the equivalent linearization,an approach was proposed to calculate the bounds on LCOs over the full flight envelope.The bounds are determined directly without solving LCOs one by one as the flow speed varies.The presented approach can provide us with the maximal LCO amplitudes and the lower threshold for flow speed beyond which LCOs may arise.Numerical examples show that the obtained bounds are in nice agreement with numerical simulation results.The speed threshold can be predicted to a relative error less than 0.1%,and the maximal LCO amplitude to about 3%.The influences of the system parameters on the speed threshold for speed were investigated efficiently by the proposed approach.
基金supported by the National Natural Science Foundation of China(Grant Nos.11021262,11172303 and 11132011)National Basic Research Program of China(Grant No.2012CB937500)
文摘Based on the crystal plasticity theory and interatomic potential, in this paper a new thermo-elasto-plasticity constitutive model is proposed to study the behavior of metal crystals at finite temperature. By applying the present constitutive model, the stress-strain curves under uniaxial tension at different temperatures are calculated for the typical crystal A1, and the calculated results are compared with the experimental results. From the comparisons, it can be seen that the present theory has the capability to describe the thermo-elasto-plastic behavior of metal crystals at finite temperature through a concise and explicit calculation process.
