A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micr...A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.展开更多
The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process wa...The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process was investigated. And the heat transfer of the casting during solidification process was analyzed by simulation technique, resulting from the information of linear segregation obtained by plenty of experiments. The new linear segregation criterion was proposed through the simulation and experimental results. It was found that the melting metal with high Cu contents was feeding the crack shrinkage formed by the tearing under the effect of feeding pressure during the later solidification, which led to the formation of linear segregation. The control methods for the linear segregation were suggested based on the proposed mechanism. Finally, the criterion of linear segregation was confirmed by the production of the actual castings.展开更多
To clarify the taxonomic status of Phlebotomus chinensb, the morphological characters of Ph. chinensis from Shaanxi, Henan, Sichuan and Gansu Provinces, and Ph. wui and Ph. longiductus from Xinjiang were examined and ...To clarify the taxonomic status of Phlebotomus chinensb, the morphological characters of Ph. chinensis from Shaanxi, Henan, Sichuan and Gansu Provinces, and Ph. wui and Ph. longiductus from Xinjiang were examined and the rDNA-ITS2 region and mtDNA Cyt b gene sequences were analyzed simultaneously. It was found that morphological variation was very low in Ph. chinensis among the different localities; the wings of adult samples distributed in high-altitude areas were merely longer. The rDNA-ITS2 and mtDNA Cyt b sequences had an intraspecific variability. The relationships among species in the genus Phlebotomus can be inferred by molecular markers. These results suggest that there is an obvious genetic divergence at the molecular level among the Ph. chinensis populations in China.展开更多
The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accura...The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accurately estimate the bulk modulus by using conventional methods. In this paper, we present a new linear regression equation for calculating the parameter. In order to get this equation, we first derive a simplified Gassmann equation by using a reasonable assumption in which the compressive coefficient of the saturated pore fluid is much greater than the rock matrix, and, second, we use the Eshelby- Walsh relation to replace the equivalent modulus of a dry rock in the Gassmann equation. Results from the rock physics analysis of rock sample from a carbonate area show that rock matrix compressive coefficients calculated with water-saturated and dry rock samples using the linear regression method are very close (their error is less than 1%). This means the new method is accurate and reliable.展开更多
AIM: To observe the effect of solanine on the membrane potential of mitochondria in HepG2 cells and [Ca^2+]i in the cells, and to uncover the mechanism by which solanine induces apoptosis.METHODS: HepG2 cells were ...AIM: To observe the effect of solanine on the membrane potential of mitochondria in HepG2 cells and [Ca^2+]i in the cells, and to uncover the mechanism by which solanine induces apoptosis.METHODS: HepG2 cells were double stained with AO/EB, and morphological changes of the cells were observed using laser confocal scanning microscopy (LCSM). HepG2 cells were stained with TMRE, and change in the membrane potential of mitochondria in the cells were observed using LCSM. HepG2 cells were double stained with Fluo-3/AM, and change of [Ca^2+]i in the cells were observed using LCSM. HepG2 cells were double stained with TMRE and Fluo-3/AM, and both the change in membrane potential of mitochondria and that of [Ca^2+]i in the cells were observed using LCSM.RESULTS: Cells in treated groups showed typical signs of apoptosis. Staining with TMRE showed that solanine could lower membrane potential; staining with Fluo-3/AM showed that solanine could increase the concentration of Ca^2+ in tumor cells; and those of double staining with TMRE and Fluo-3/AM showed that solanine could increase the concentration of Ca^2+ in the cells at the same time as it lowered the membrane potential of mitochondria.CONCLUSION: Solanine opens up the PT channels in the membrane by lowering the membrane potential, leading to Ca^2+ being transported down its concentration gradient, which in turn leads to the rise of the concentration of Ca^2+ in the cell, turning on the mechanism for apoptosis.展开更多
Perciformes,the largest order of vertebrates with 20 suborders,is the most diverse fish order that dominates vertebrate ocean life.The complete mitochondrial control region(CR) of Trichiurus japonicus(Trichiuridae,Sco...Perciformes,the largest order of vertebrates with 20 suborders,is the most diverse fish order that dominates vertebrate ocean life.The complete mitochondrial control region(CR) of Trichiurus japonicus(Trichiuridae,Scombroidei) and Pampus sp.(Stromateidae,Stromateoidei) were amplified and sequenced.Together with data from GenBank,the tandem repeats in the mitochondrial CR from 48 species,which covered nine suborders of Perciformes,are reported in this study.The tandem repeats tend to be long in the suborder Percoidei and Stromateoidei.The identical repeats in 21 species of Cichlidae suggest a common origin and have existed before species divergence.Larimichthys crocea shows tandem repeats instead of the typical structure of the central conserved sequence blocks,which was first reported in Perciformes and vertebrates.This might have resulted from interruption of the polymerase activity during the H-strand synthesis.The four broader patterns presented here for the tandem repeats,including those in both the 5' and 3' ends,only in the either 5' or 3' end,and in the central conserved domain of the control region,will be useful for understanding the evolution of species.展开更多
The essential of feature matching technology lies in how to measure the similarity of spatial entities.Among all the possible similarity measures,the shape similarity measure is one of the most important measures beca...The essential of feature matching technology lies in how to measure the similarity of spatial entities.Among all the possible similarity measures,the shape similarity measure is one of the most important measures because it is easy to collect the necessary parameters and it is also well matched with the human intuition.In this paper a new shape similarity measure of linear entities based on the differences of direction change along each line is presented and its effectiveness is illustrated.展开更多
A new record of Sebastes koreanus (Kim and Lee, 1994) was documented based on morphological characters and DNA barcoding. Fifty-six Sebastes specimens were collected from the coastal waters of northern China. Sample...A new record of Sebastes koreanus (Kim and Lee, 1994) was documented based on morphological characters and DNA barcoding. Fifty-six Sebastes specimens were collected from the coastal waters of northern China. Samples were identified as S. koreanus based on morphological characters. The coloration and morphometric measurements were consistent with those described from specimens collected in South Korea. In this study, specimens had the following morphological characteristics: light brown body with dark stripes and tiny dark spots, 4-5 wide indistinct vertical patterns on the side, 2 radial stripes behind and below the eyes, 1 large dark blotch on the opercle. Additionally, the following meristie characters were recorded: dorsal fin XIV-13, pectoral fin 16, anal fin III-6-7, pelvic fin [-5, lateral line scales 29-30, and vertebrae 26. The fragment of cytochrome oxidase subunit I (CO1) gene of mitochondrial DNA was sequenced for phylogenetic analysis. The mean genetic distance within the species was 0.3%. Net genetic distances between S. koreanus and other Sebastes species ranged from 3.1% to 7.6%, which was greater than the threshold for species delimitation. The phylogenetic analysis strongly supports the validity of S. koreanus in China at the genetic level. The origion, evolution, patterns of speciation and unique features in genome divergence among primate lineages of this species still need future directions of research.展开更多
The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. T...The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. The numerical and experimental approaches were utilized to examine the time dependent flow field and the pressure oscillation around the bluff bodies. The numerical data were obtained by the advanced large eddy simulation model. The experiment was conducted on a laboratory scale of Karman vortex flowmeter with 40 mm diameter. It is revealed that the optimized dual bluff body combinations strengthened the hydrodynamic vibration. It was also found that the hydrodynamic vibration with 180° phase difference occurred at the axisymmetric points of circular pipe on the lateral faces of the equilateral triangle-section bluff bodies. Using the dual bluff body configuration and the differential sensing technique, a novel prototype of vortex flowmeter with excellent noise immunity and improved sensibility was developed.展开更多
Grain growth of nanostructured Al6061produced by cryorolling and aging process was investigated during isothermalheat treatment in100?500°C temperature range.Transmission electron microscopy(TEM)observations demo...Grain growth of nanostructured Al6061produced by cryorolling and aging process was investigated during isothermalheat treatment in100?500°C temperature range.Transmission electron microscopy(TEM)observations demonstrate that aftercryorolling and aging at130°C for30h,the microstructure contains61nm grains with dispersed50?150nm precipitates and0.248%lattice strain.In addition,an increase in tensile strength up to362MPa because of formation of fine strengtheningprecipitation and nano-sized grains was observed.Thermal stability investigation within100?500°C temperature range showedrelease of lattice strain,dissolution of precipitates and grain growth.According to the X-ray diffraction(XRD)analysis,Mg2Siprecipitates disappeared after annealing at temperatures higher than300°C.According to the results,due to the limited grain growthup to200°C,there would be little decrease in mechanical properties,but within300?500°C range,the grain growth,dissolution ofstrengthening precipitates and decrease in mechanical properties are remarkable.The activation energies for grain growth werecalculated to be203.3kJ/mol for annealing at100?200°C and166.34kJ/mol for annealing at300?500°C.The effect ofprecipitation dissolution on Al lattice parameter,displacement of Al6061(111)XRD peak and Portevin?LeChatelier(PLC)effect onstress?strain curves is also discussed.展开更多
Development of inhomogeneous deformation is an interest matter in material engineering. Synchrotron radiation tomography provides 3D distribution map of local strain in polycrystalline aluminum alloy by tracking micro...Development of inhomogeneous deformation is an interest matter in material engineering. Synchrotron radiation tomography provides 3D distribution map of local strain in polycrystalline aluminum alloy by tracking microstructural features. To perform further deep analysis on development of inhomogeneous deformation, crystallographic grain orientation is necessary. Three-dimensional X-ray diffraction technique was developed. A new crystallographic orientation measurement method was described in 3D space, utilizing grain boundary tracking (GBT) information.展开更多
The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) h...The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.展开更多
The water entry problem of an asymmetric wedge with roll motion was analyzed by the method of a modified Logvinovich model (MLM). The MLM is a kind of analytical model based on the Wagner method, which linearizes the ...The water entry problem of an asymmetric wedge with roll motion was analyzed by the method of a modified Logvinovich model (MLM). The MLM is a kind of analytical model based on the Wagner method, which linearizes the free surface condition and body boundary condition. The difference is that the MLM applies a nonlinear Bernoulli equation to obtain pressure distribution, which has been proven to be helpful to enhance the accuracy of hydrodynamic loads. The Wagner condition in this paper was generalized to solve the problem of the water entry of a wedge body with rotational velocity. The comparison of wet width between the MLM and a fully nonlinear numerical approach was given, and they agree well with each other. The effect of angular velocity on the hydrodynamic loads of a wedge body was investigated.展开更多
For cooled 320 × 240 detector with staring focal plane array, a novel middle infrared athermal optical system is presented. The system is composed of 5 spherical lenses. The materials of lenses are silicon and ge...For cooled 320 × 240 detector with staring focal plane array, a novel middle infrared athermal optical system is presented. The system is composed of 5 spherical lenses. The materials of lenses are silicon and germanium. The optical parameters and modulation transfer function (MTF) are investigated. The system has the diffraction limited image quality and stable image plane from -30 ℃ to 70 ℃. The characteristic parameters of the system are as follows:flnumber of 4, cold shield efficiency of 100%, spectrum region of 3.7-4.8 μm and transmissivity of 80%. The system has the merits of simple structure, low price, and it is easy to machining.展开更多
基金the National Natural Science Foundation of China(Nos.U21A2051,52173297,52071133)the R&D Projects of Henan Academy of Sciences of China(No.220910009)+2 种基金the Key R&D and Promotion Projects of Henan Province of China(No.212102210441)the Joint Fund of Henan Science and Technology R&D Plan of China(No.222103810037)the Zhongyuan Scholar Workstation Funded Project of China(No.214400510028).
文摘A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.
文摘The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process was investigated. And the heat transfer of the casting during solidification process was analyzed by simulation technique, resulting from the information of linear segregation obtained by plenty of experiments. The new linear segregation criterion was proposed through the simulation and experimental results. It was found that the melting metal with high Cu contents was feeding the crack shrinkage formed by the tearing under the effect of feeding pressure during the later solidification, which led to the formation of linear segregation. The control methods for the linear segregation were suggested based on the proposed mechanism. Finally, the criterion of linear segregation was confirmed by the production of the actual castings.
基金supported by the Chinese National Natural Science Foundations(No.30771869)
文摘To clarify the taxonomic status of Phlebotomus chinensb, the morphological characters of Ph. chinensis from Shaanxi, Henan, Sichuan and Gansu Provinces, and Ph. wui and Ph. longiductus from Xinjiang were examined and the rDNA-ITS2 region and mtDNA Cyt b gene sequences were analyzed simultaneously. It was found that morphological variation was very low in Ph. chinensis among the different localities; the wings of adult samples distributed in high-altitude areas were merely longer. The rDNA-ITS2 and mtDNA Cyt b sequences had an intraspecific variability. The relationships among species in the genus Phlebotomus can be inferred by molecular markers. These results suggest that there is an obvious genetic divergence at the molecular level among the Ph. chinensis populations in China.
基金supported by the National Nature Science Foundation of China (Grant Noss 40739907 and 40774064)National Science and Technology Major Project (Grant No. 2008ZX05025-003)
文摘The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accurately estimate the bulk modulus by using conventional methods. In this paper, we present a new linear regression equation for calculating the parameter. In order to get this equation, we first derive a simplified Gassmann equation by using a reasonable assumption in which the compressive coefficient of the saturated pore fluid is much greater than the rock matrix, and, second, we use the Eshelby- Walsh relation to replace the equivalent modulus of a dry rock in the Gassmann equation. Results from the rock physics analysis of rock sample from a carbonate area show that rock matrix compressive coefficients calculated with water-saturated and dry rock samples using the linear regression method are very close (their error is less than 1%). This means the new method is accurate and reliable.
基金Supported by the National Natural Science Foundation of China, No. 30400591 the Heilongjiang Province Natural Science Foundation, No. D2004-13, D200505 Harbin City Young Scientist Foundation, No. 2004AFQXJ035
文摘AIM: To observe the effect of solanine on the membrane potential of mitochondria in HepG2 cells and [Ca^2+]i in the cells, and to uncover the mechanism by which solanine induces apoptosis.METHODS: HepG2 cells were double stained with AO/EB, and morphological changes of the cells were observed using laser confocal scanning microscopy (LCSM). HepG2 cells were stained with TMRE, and change in the membrane potential of mitochondria in the cells were observed using LCSM. HepG2 cells were double stained with Fluo-3/AM, and change of [Ca^2+]i in the cells were observed using LCSM. HepG2 cells were double stained with TMRE and Fluo-3/AM, and both the change in membrane potential of mitochondria and that of [Ca^2+]i in the cells were observed using LCSM.RESULTS: Cells in treated groups showed typical signs of apoptosis. Staining with TMRE showed that solanine could lower membrane potential; staining with Fluo-3/AM showed that solanine could increase the concentration of Ca^2+ in tumor cells; and those of double staining with TMRE and Fluo-3/AM showed that solanine could increase the concentration of Ca^2+ in the cells at the same time as it lowered the membrane potential of mitochondria.CONCLUSION: Solanine opens up the PT channels in the membrane by lowering the membrane potential, leading to Ca^2+ being transported down its concentration gradient, which in turn leads to the rise of the concentration of Ca^2+ in the cell, turning on the mechanism for apoptosis.
基金Supported by the National Natural Science Foundation of China(No.40676085)
文摘Perciformes,the largest order of vertebrates with 20 suborders,is the most diverse fish order that dominates vertebrate ocean life.The complete mitochondrial control region(CR) of Trichiurus japonicus(Trichiuridae,Scombroidei) and Pampus sp.(Stromateidae,Stromateoidei) were amplified and sequenced.Together with data from GenBank,the tandem repeats in the mitochondrial CR from 48 species,which covered nine suborders of Perciformes,are reported in this study.The tandem repeats tend to be long in the suborder Percoidei and Stromateoidei.The identical repeats in 21 species of Cichlidae suggest a common origin and have existed before species divergence.Larimichthys crocea shows tandem repeats instead of the typical structure of the central conserved sequence blocks,which was first reported in Perciformes and vertebrates.This might have resulted from interruption of the polymerase activity during the H-strand synthesis.The four broader patterns presented here for the tandem repeats,including those in both the 5' and 3' ends,only in the either 5' or 3' end,and in the central conserved domain of the control region,will be useful for understanding the evolution of species.
文摘The essential of feature matching technology lies in how to measure the similarity of spatial entities.Among all the possible similarity measures,the shape similarity measure is one of the most important measures because it is easy to collect the necessary parameters and it is also well matched with the human intuition.In this paper a new shape similarity measure of linear entities based on the differences of direction change along each line is presented and its effectiveness is illustrated.
基金Supported by the National Natural Science Foundation of China(No.41176117)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20120132110009)
文摘A new record of Sebastes koreanus (Kim and Lee, 1994) was documented based on morphological characters and DNA barcoding. Fifty-six Sebastes specimens were collected from the coastal waters of northern China. Samples were identified as S. koreanus based on morphological characters. The coloration and morphometric measurements were consistent with those described from specimens collected in South Korea. In this study, specimens had the following morphological characteristics: light brown body with dark stripes and tiny dark spots, 4-5 wide indistinct vertical patterns on the side, 2 radial stripes behind and below the eyes, 1 large dark blotch on the opercle. Additionally, the following meristie characters were recorded: dorsal fin XIV-13, pectoral fin 16, anal fin III-6-7, pelvic fin [-5, lateral line scales 29-30, and vertebrae 26. The fragment of cytochrome oxidase subunit I (CO1) gene of mitochondrial DNA was sequenced for phylogenetic analysis. The mean genetic distance within the species was 0.3%. Net genetic distances between S. koreanus and other Sebastes species ranged from 3.1% to 7.6%, which was greater than the threshold for species delimitation. The phylogenetic analysis strongly supports the validity of S. koreanus in China at the genetic level. The origion, evolution, patterns of speciation and unique features in genome divergence among primate lineages of this species still need future directions of research.
基金Supported by the National Natural Science Foundation of China (No. 59835160) and Scientific Research Foundation of State Education Ministry for Returned Overseas Chinese Scholars.
文摘The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. The numerical and experimental approaches were utilized to examine the time dependent flow field and the pressure oscillation around the bluff bodies. The numerical data were obtained by the advanced large eddy simulation model. The experiment was conducted on a laboratory scale of Karman vortex flowmeter with 40 mm diameter. It is revealed that the optimized dual bluff body combinations strengthened the hydrodynamic vibration. It was also found that the hydrodynamic vibration with 180° phase difference occurred at the axisymmetric points of circular pipe on the lateral faces of the equilateral triangle-section bluff bodies. Using the dual bluff body configuration and the differential sensing technique, a novel prototype of vortex flowmeter with excellent noise immunity and improved sensibility was developed.
文摘Grain growth of nanostructured Al6061produced by cryorolling and aging process was investigated during isothermalheat treatment in100?500°C temperature range.Transmission electron microscopy(TEM)observations demonstrate that aftercryorolling and aging at130°C for30h,the microstructure contains61nm grains with dispersed50?150nm precipitates and0.248%lattice strain.In addition,an increase in tensile strength up to362MPa because of formation of fine strengtheningprecipitation and nano-sized grains was observed.Thermal stability investigation within100?500°C temperature range showedrelease of lattice strain,dissolution of precipitates and grain growth.According to the X-ray diffraction(XRD)analysis,Mg2Siprecipitates disappeared after annealing at temperatures higher than300°C.According to the results,due to the limited grain growthup to200°C,there would be little decrease in mechanical properties,but within300?500°C range,the grain growth,dissolution ofstrengthening precipitates and decrease in mechanical properties are remarkable.The activation energies for grain growth werecalculated to be203.3kJ/mol for annealing at100?200°C and166.34kJ/mol for annealing at300?500°C.The effect ofprecipitation dissolution on Al lattice parameter,displacement of Al6061(111)XRD peak and Portevin?LeChatelier(PLC)effect onstress?strain curves is also discussed.
文摘Development of inhomogeneous deformation is an interest matter in material engineering. Synchrotron radiation tomography provides 3D distribution map of local strain in polycrystalline aluminum alloy by tracking microstructural features. To perform further deep analysis on development of inhomogeneous deformation, crystallographic grain orientation is necessary. Three-dimensional X-ray diffraction technique was developed. A new crystallographic orientation measurement method was described in 3D space, utilizing grain boundary tracking (GBT) information.
基金Project(51304041) supported by the National Natural Science Foundation of ChinaProject(N100402015) supported by Fundamental Research Funds for the Central Universities of China+1 种基金Project(2012AA03A502) supported by the National High Technology Research and Development Program of ChinaProject supported by Program for Liaoning Innovative Research Team in University,China
文摘The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.
基金Supported by Supported by "111 Program" (B07019)
文摘The water entry problem of an asymmetric wedge with roll motion was analyzed by the method of a modified Logvinovich model (MLM). The MLM is a kind of analytical model based on the Wagner method, which linearizes the free surface condition and body boundary condition. The difference is that the MLM applies a nonlinear Bernoulli equation to obtain pressure distribution, which has been proven to be helpful to enhance the accuracy of hydrodynamic loads. The Wagner condition in this paper was generalized to solve the problem of the water entry of a wedge body with rotational velocity. The comparison of wet width between the MLM and a fully nonlinear numerical approach was given, and they agree well with each other. The effect of angular velocity on the hydrodynamic loads of a wedge body was investigated.
文摘For cooled 320 × 240 detector with staring focal plane array, a novel middle infrared athermal optical system is presented. The system is composed of 5 spherical lenses. The materials of lenses are silicon and germanium. The optical parameters and modulation transfer function (MTF) are investigated. The system has the diffraction limited image quality and stable image plane from -30 ℃ to 70 ℃. The characteristic parameters of the system are as follows:flnumber of 4, cold shield efficiency of 100%, spectrum region of 3.7-4.8 μm and transmissivity of 80%. The system has the merits of simple structure, low price, and it is easy to machining.