期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
基于线示模型的铣削CAD/CAM系统的研究 被引量:2
1
作者 于忠海 吴凤和 《燕山大学学报》 CAS 1999年第3期228-230,共3页
基于线示模型理论,开发了一种实用铣削CAD/CAM系统.该系统不仅能完成直纹面、拉伸曲面等自由曲面的构型与合成,还可实现NC代码的自动生成及加工模拟.
关键词 线示模型 自由曲面 NC代码 CAD/CAM.
下载PDF
基于线示模型法的数控自动编程 被引量:1
2
作者 吴凤和 朱继武 《齐齐哈尔大学学报(自然科学版)》 2000年第2期46-48,共3页
在Auto CAD环境下,基于线示模型,利用图形的DXF文件,经后置处理自动生成了数控程序。
关键词 线示模型 DXF文件 数控程序 自动编程 CAD/CAM
下载PDF
基于线示模型法的数控自动编程及加工仿真
3
作者 于忠海 《燕山大学学报》 CAS 2000年第2期132-134,共3页
在AutoCAD环境下,基于线示模型理论,利用图形的DXF文件,经后置处理自动生成了数控程序(NC代码),并能进行数控加工过程的仿真。
关键词 线示模型 NC代码 数控加工过程仿真
下载PDF
基于Auto CAD的数控自动编程系统中的图形处理 被引量:3
4
作者 吴凤和 王志勇 《齐齐哈尔大学学报(自然科学版)》 2000年第4期38-40,共3页
介绍了基于AutoCAD的数控自动编程系统所采用的几何建模方法—线示模型法 。
关键词 AUTO CAD 线示模型 数控自动编程 几何建模 图形处理 基本体素 行间距 步长 CAD CAM
下载PDF
MCSYS系统的开发及微机CAD/CAM(Ⅰ)
5
作者 刘庆民 《吉林林学院学报》 1992年第1期35-40,共6页
本文论述了MCSYS系统的第一部分——CAD部分。该系统以断面曲线的集合来表现形状,断面曲线用直线和圆弧逼近,可生成棱柱体、棱锥体、球体、平面和Bezier曲面。在相同间隔的线元上,可以进行"和"与"差"的组合运算,得... 本文论述了MCSYS系统的第一部分——CAD部分。该系统以断面曲线的集合来表现形状,断面曲线用直线和圆弧逼近,可生成棱柱体、棱锥体、球体、平面和Bezier曲面。在相同间隔的线元上,可以进行"和"与"差"的组合运算,得到所需要的形状。CAD为下一步CAM加工做了充分准备。 展开更多
关键词 线示模型 线 数据结构
下载PDF
三维微机数控图形自动编程系统
6
作者 袁懿先 刘杰 《技术经济》 1997年第3期61-63,共3页
关键词 图形自动编程 线示模型 微机数控 合成运算 线间距 数控图形 断面曲线 数控加工指令 文件描述符 预定义函数
下载PDF
A new group contribution-based method for estimation of flash point temperature of alkanes
7
作者 戴益民 刘辉 +5 位作者 陈晓青 刘又年 李浔 朱志平 张跃飞 曹忠 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第1期30-36,共7页
Flash point is a primary property used to determine the fire and explosion hazards of a liquid. New group contribution-based models were presented for estimation of the flash point of alkanes by the use of multiple li... Flash point is a primary property used to determine the fire and explosion hazards of a liquid. New group contribution-based models were presented for estimation of the flash point of alkanes by the use of multiple linear regression(MLR)and artificial neural network(ANN). This simple linear model shows a low average relative deviation(AARD) of 2.8% for a data set including 50(40 for training set and 10 for validation set) flash points. Furthermore, the predictive ability of the model was evaluated using LOO cross validation. The results demonstrate ANN model is clearly superior both in fitness and in prediction performance.ANN model has only the average absolute deviation of 2.9 K and the average relative deviation of 0.72%. 展开更多
关键词 flash point alkane group contribution artificial neural network(ANN) quantitative structure-property relationship(QSPR)
下载PDF
Optimal Multimodel Representation by Laguerre Filters Applied to a Communicating Two Tank System
8
作者 SAMEH Adaily ABDELKADER Mbarek +1 位作者 TAREK Garna JOSE Ragot 《Journal of Systems Science & Complexity》 SCIE EI CSCD 2018年第3期621-646,共26页
This paper presents the development of a new nonlinear representation by exploiting the multimodel approach and the new linear representation ARX-Laguerre for each operating region. The resulting multimodel, entitled ... This paper presents the development of a new nonlinear representation by exploiting the multimodel approach and the new linear representation ARX-Laguerre for each operating region. The resulting multimodel, entitled ARX-Laguerre multimodel, is characterized by the parameter number reduction with a recursive representation. However, a significant reduction of this multimodel is subject to an optimal choice of Laguerre poles characterizing each local linear model ARX-Laguerre. Therefore, the authors propose an optimization algorithm to estimate, from input/output measurements, the optimal values of Laguerre poles. The ARX-Laguerre multimodel as well as the proposed optimization algorithm are tested on a continuous stirred tank reactor system (CSTR). Moreover, the authors take into account a practical validation on an experimental communicating two tank system (CTTS). 展开更多
关键词 ARX-Laguerre model Laguerre poles multimodel approach optimization
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部