一种实用的等环量线旋翼尾迹生成新法

提出了一种实用的等环最级旋翼尾迹生成新法。该方法不仅能够满足识别旋翼桨叶展向多环最峰分布的要求，而且能同时处理正环量峰和负环量峰。与传统的涡格法相比，该法具有快速、简便、可靠及易程序化等优点。

等环量线旋翼尾迹生成的广适性方法

不同飞行状态下,旋翼尾迹特性是有差别的,有时还很大。数值计算模拟的尾迹结构不够,将难以获得收敛解。针对旋翼复杂尾迹处理的难度,本文提出了一套独特的等环量线旋翼尾迹生成方法,该方法突破了一般方法对旋翼桨叶展向多环量峰分布所做的限制,能够处理旋翼桨叶展向多环量峰复杂分布的情况,具有适用性广的特点。大量算例结果表明,本文所发展的方法是有效的,可以处理比较宽的飞行参数下的旋翼尾迹,并获得满意的结果。

相对柔韧性测量方法的简化

相对柔韧性测量方法的简化是体育测量与评价的重要问题。分别用线量法、比值法、简易法对实验对象进行评价,得出简易法效标有效性的结果,认为应该推广"简易法",以推动体育测量与评价方法的发展。

扇区波束赋形基站天线分析与综合

本文分析了几种复杂结构基站天线 ,并使用遗传算法进行了方向图综合设计。对天线结构采用线栅网格近似 ,用矩量法分析。并针对方向图参数要求 ,采用遗传算法对天线方向图进行了综合。在优化过程中对方向图参数构造了综合目标函数 ,保证了增益、满足了扇区波束宽度 ,并控制了后瓣。此方法可用于同种类不同振子排列形式的天线。

In-situ measurement and distribution of flue gas mercury for a utility PC boiler system

The in-situ instrumentation technique for measuring mercury and itsspeciation downstream a utility 100 MW pulverized coal (PC) fired boiler system was developed andconducted by the use of the Ontario hydro method (OHM) consistent with American standard test methodtogether with the semi-continuous emissions monitoring (SCEM) system as well as a mobile laboratoryfor mercury monitoring. The mercury and its speciation concentrations including participate mercuryat three locations of before air preheater, before electrostatic precipitator (ESP) and after ESPwere measured using the OHM and SCEM methods under normal operation conditions of the boiler systemas a result of firing a bituminous coal. The vapor-phase total mercury Hg(VT) concentration declinedwith the decrease of flue gas temperature because of mercury species transformation from oxidizedmercury to particulate mercury as the flue gas moved downstream from the air preheater to the ESPand after the ESP. A good agreement for Hg°, Hg^(2+) and Hg( VT) was obtained between the twomethods in the ash-free area. But in the dense particle-laden flue gas area, there appeared to be abig bias for mercury speciation owing to dust cake formed in the filter of OHM sampling probe. Theparticulateaffinity to the flue gas mercury and the impacts of sampling condition to accuracy ofmeasure were discussed.

Impacts of bird abundance, activity height and light intensity on the number of birds captured by mist netting

To understand better the impact on mist net capture rates of the activity height of birds, light intensity, bird richness and abundance, we compared data from mist nets and point counts at the Jianfengling Forest Area, Hainan Island. Mist-nets were operated for a total of 7135 net-hours. A total of 587 individuals of 45 bird species were captured. The total mean capture rate was 8.6 ± 10.4 per 100 net-hours. A total of 4932 individuals of 107 bird species were recorded by visual observation alone and 7616 individuals of 120 species were recorded in a visual and aural combination. The Grey-cheeked Fulvetta (Alcippe morrisonia) was the most abundant species, accounting for 38.7% of total captures, 27.9% of visual observations and 22.2% of visual + aural observations. The capture number was correlated with the number observed. Thirty-one species were more likely to be captured than observed. Canopy species, such as members of the Corvidae and Dicruridae, were seldom captured. For all ground feeding species, the capture number was greater than that of observation. Some cryptic species, such as the Lesser Wren Babbler (Napothera epilepidota), Spotnecked Babbler (Stachyris striolata) and Cuckoo Owl (Glaucidium cuculoides) also had a higher relative capture rate than that of observations. There was a significant relationship between light intensity and the number of birds captured.

Theoretical Study on Stereodynamics of Reactions of N（^2D）＋H2→NH＋H and N（^2D）＋D2→ND＋D

The vector correlations between products and reagents for the title reactions have been calculated by the quasi-classical trajectory method at a collision energy of 21.32 kJ/mol on an accurate potential energy surface of Ho et al. （J. Chem. Phys. 119, 3063 （2003））. The peaks of the product angular distribution are found to be in both backward and forward directions for the two title reactions. The product rotational angular momentum is not only aligned, but also oriented along the negative direction of y-axis. These theoretical results are in good agreement with recent experimental findings for the two title reactions. The isotopic effect is also revealed and primarily attributed to the difference of the mass factor in the two title reactions.

Throughput scheduling in cognitive radio networks based on immune optimization

To study the throughput scheduling problem under interference temperature in cognitive radio networks, an immune algorithm-based suboptimal method was proposed based on its NP-hard feature. The problem is modeled as a constrained optimization problem to maximize the total throughput of the secondary users（ SUs）. The mapping between the throughput scheduling problems and the immune algorithm is given. Suitable immune operators are designed such as binary antibody encoding, antibody initialization based on pre-knowledge, a proportional clone to its affinity and an adaptive mutation operator associated with the evolutionary generation. The simulation results showthat the proposed algorithm can obtain about 95% of the optimal throughput and operate with much lower liner computational complexity.

Determination of the intrinsic kinetics of iron oxide reduced by carbon monoxide in an isothermal differential micro-packed bed

The intrinsic kinetics of iron oxide reduced by carbon monoxide is evaluated by a method of online measuring concentration of off-gas in an isothermal differential micro-packed bed. Under the condition of getting away from the influence of gas diffusion and gas–solid heat transfer and mass transfer, the reaction of Fe2O3 to Fe3O4, Fe3O4 to Fe O and Fe O to Fe in the process of single reaction can be clearly distinguished from each other, and the relevant activation energy is characterized to be 75.4, 74.4, and 84.0 k J·mol-1, respectively. Therefore, the change of surface area in the reaction process due to losing oxygen could be easily calculated by combining it with pre-exponential parameters of Arrhenius equations. In conclusion, these kinetic parameters are verified by the experimental data for the process of ore reduced by carbon monoxide in a packed bed.

Estimation of Geodetic Parameters with VLBI Data of Last 5 Years

The meaning to research the potential of VLBI for geodetic applications is summarized. And the observation models and their related parameters of geodetic interest are investigated. Then, the principle and method of using the random model in VLBI data processing are investigated. With the world wide VLBI data from 2000-2004, the conditions to compute the parameters of geodetic interest are introduced, and so are the computing methods and processes. And the computed resuits of the parameters of geodetic interest are analyzed.

Exploration of Influential People for Viral Marketing

Exploration of influential people is really a hot issue for effective viral marketing these days. Prior studies overlooked to consider the influence of interaction between users and the authority of users during information dissemination. In this article, we proposed an innovative concept by employing communication strength and authority in order to explore the influential people. First, we calculated communication strength by three kinds of actions including retweets, comments and mentions. Second, we deliberated authority metric by employing total times getting re-tweeted, number of tweets and followers of a user. Then, we propose a novel algorithm called Influential People Label Propagation Algorithm(IPLPA) that considers the proposed metric to explore the influential people in micro-blog networks. We performed extensive experiments to measure the influence and rank of each person within micro-blog network. The comparative study presents that IPLPA depicted effective people while baseline algorithms retrieved low influenced people at top rank. Additionally, influence dissemination also measured for obtained influential people in order to validate proposed concept. The findings of this study would be useful for viral marketing and advertisement campaigns.

Experimental study by online measurement of the precipitation of nickel hydroxide: Effects of operating conditions

The objective of this work is using the online measurement method to study the process of precipitation of nickel hydroxide in a single-feed semi-batch stirred reactor with an internal diameter ofD = 240mm. The effects of impeller speed, impeller type, impeller diameter and feed location on the mean particle size d43 and particle size distribution （PSD） were investigated, d43 and PSD were measured online using a Malvern Insitec Liquid Pro- cess Sizer every 20 s. It was found that d43 varied between 13 kwh and 26 lain under different operating conditions, and it decreased with increasing impeller diameter. When feeding at the off-bottom distance of D/2 under lower impeller speeds, d43 was significantly smaller than that at D/3. PSDs were slightly influenced by operating conditions.

Multiple sub-array beamspace CAATI algorithm for multi-beam bathymetry system

This paper extends CAATI （Computed Angle-of-Arrival Transient Imaging） technique of Multi-angle Swath Bathymetry Sidesean Sonar （MSBSS） into Multi-Beam Bathymetry Sonar （MBBS） and presents a new Multiple Sub-array Beamspaee - CAATI （MSB-CAATI） algorithm. The method not only can achieve high resolution seafloor mapping in the whole wide swath, but also can work well in complex acoustic environments or geometries. Simulation results and processing results of sea-experiment data prove the validity and superiority of the algorithm.

Rational offset approximation of rational Bézier curves

The problem of parametric speed approximation of a rational curve is raised in this paper. Offset curves are widely used in various applications. As for the reason that in most cases the offset curves do not preserve the same polynomial or rational polynomial representations, it arouses difficulty in applications. Thus approximation methods have been introduced to solve this problem. In this paper, it has been pointed out that the crux of offset curve approximation lies in the approximation of parametric speed. Based on the Jacobi polynomial approximation theory with endpoints interpolation, an algebraic rational approximation algorithm of offset curve, which preserves the direction of normal, is presented.

Design of ground-airborne TEM three-component air-core coil sensor

Transient electromagnetic method (TEM),as a non-seismic geophysical exploration mainstream electromagnetic method,is widely used in oil,gas,mineral and other underground resources exploration areas. The coil sensor is generally used to collect data. In view of the problems of incomplete information of the abnormal body and the data loss in the existing TEM single-component coil sensor,a three-component TEM coil sensor is designed. By analyzing the relationship between sensor sensitivity and coil structure parameters,the coil structure and turns are designed. By analyzing the frequency response characteristics of the TEM magnetic field sensor,the signal distortion is reduced by using the under-damped matching mode. By analyzing the distribution of various noise sources of the magnetic sensor,the appropriate amplifier is selected to reduce the background noise. Finally,a three-component TEM induction magnetic field sensor is designed. The weight of the sensor is controlled at 3.2 kg and the working frequency is 10 mHz-10 kHz. The background noises of X and Y components probably keep in 1.5×10^-8 V/ Hz and sensitivities are 8.4 and 9.8 nT/s,respectively,the background noise of vertical component is 2.1× 10^-7 V/ Hz and sensitivity is 18.5 nT/s. Compared with the existing single-component TEM receiving magnetic field sensor,the designed sensor realizes the signal acquisition of three components. Without too much increase in volume and total weight,it improves the sensitivity of the sensor and reduces the background noise,thus the signal-to-noise ratio (SNR) of the signal is improved.

Application of 2-D Position Sensitive Detector in Spatial Straightness Measurement of Guide Rails

A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity errors of PSD and a multilayer feedforward neural network based on error back-propagation algorithm was used to compensate errors. With the aid of computer-based data acquisition system, an automatic dynamic measuring process was realized. A series of experiments, including comparison tests with laser interferometer, were done to evaluate the performance of the measuring system. The experimental results show that the spatial straightness errors of guide rails can be measured with high accuracy. The maximum differences between the device and laser interferometer are 0.027 mm in Y direction, and 0.053 mm in X direction in the measuring distance of 6 m.

High Accuracy On-line Measurement Method of Motion Error on Machine Tools Straight-going Parts

Harmonic suppression, non-periodic and non-closing in straightness profile error that will bring about harmonic component distortion in measurement result are analyzed. The countermeasure-a novel accurate two-probe method in time domain is put forward to measure straight-going component motion error in machine tools based on the frequency domain 3-point method after symmetrical continuation of probes' primitive signal. Both straight-going component motion error in machine tools and the profile error in workpiece that is manufactured on this machine can be measured at the same time. The information is available to diagnose the fault origin of machine tools. The analysis result is proved to be correct by the experiment.

Research on the Algorithm of Extracting Ridgeand Valley Lines from Contour Data

In this paper, the authors put forward a brief and practical arithmetic for auto extracting terrain lines from digital terrain data after analyzing and comparing current arithmetics.This paper gives an experiment result that the ridge and valley extracted by the arithmetic is consistent with the experimental terrain.

Interaction Between Line Soliton and Algebraic Soliton for Asymmetric Nizhnik-Novikov-Veselov Equation

Starting from the variable separation approach, the algebraic soliton solution and the solution describing the interaction between line soliton and algebraic soliton are obtained by selecting appropriate seed solution for （2＋1）-dimensional ANNV equation. The behaviors of interactions are discussed in detail both analytically and graphically. It is shown that there are two kinds of singular interactions between line soliton and algebraic soliton： 1） the resonant interaction where the algebraic soliton propagates together with the line soliton and persists infinitely; 2） the extremely repulsive interaction where the algebraic soliton affects the motion of the line soliton infinitely apart.

TWO FAST ALGORITHMS FOR COMPUTING POINT SCALAR MULTIPLICATIONS ON ELLIPTIC CURVES

The key operation in Elliptic Curve Cryptosystems(ECC) is point scalar multiplication. Making use of Frobenius endomorphism, Muller and Smart proposed two efficient algorithms for point scalar multiplications over even or odd finite fields respectively. This paper reduces the corresponding multiplier by modulo Υk-1 +…+Υ+ 1 and improves the above algorithms. Implementation of our Algorithm 1 in Maple for a given elliptic curve shows that it is at least as twice fast as binary method. By setting up a precomputation table, Algorithm 2, an improved version of Algorithm 1, is proposed. Since the time for the precomputation table can be considered free, Algorithm 2 is about (3/2) log2 q - 1 times faster than binary method for an elliptic curve over