The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller spe...The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller speed and aeration rate on the separating effect was investigated. And the optimum process conditions of flotation were confirmed. The results show that the agent dosage, pulp concentration, impeller speed and aeration rate have a significant impact on flotation recovery and en- richment of macerals. The float recovery was 73.28% and enrichment ratio of vitrinite was 83.89% when CTAB dosage of 1.0 kg/t, pulp concentration of 100 g/L, impeller speed of 1 700 r/min and aeration rate of 0.25 m3/（m2·min） were used. The tailings yield was 60.30% and enrichment ratio of inertinite was 61.44% when CTAB dosage of 0.5 kg/t, pulp concentration of 100 g/L, impeller speed of I 700 r/min and aeration rate of 0.20 m3/（m2·min） were used.展开更多
The shell and tube heat exchanger is an essential part of a power plant for recovering heat transfer between the feed water of a boiler and the wasted heat.The baffles are also an important element inside the heat exc...The shell and tube heat exchanger is an essential part of a power plant for recovering heat transfer between the feed water of a boiler and the wasted heat.The baffles are also an important element inside the heat exchanger.Internal materials influence the flow pattern in the bed.The influence of baffles in the velocity profiles was observed using a three-dimensional particle image velocimetry around baffles in a horizontal circular tube.The velocity of the particles was measured before the baffle and between them in the test tube.Results show that the flows near the front baffle flow were parallel to the vertical wall,and then concentrate on the upper opening of the front baffle.The flows circulate in the front and rear baffles.These flow profiles are related to the Reynolds number(Re) or the flow intensity.The velocity profiles at lower Re number showed a complicated mixing,concentrating on the lower opening of the rear baffle as front wall.Swirling flow was employed in this study,which was produced using tangential velocities at the inlet.At the entrance of the front baffle,the velocity vector profiles with swirl were much different from that without swirl.However,velocities between two baffles are not much different from those without swirl.展开更多
文摘The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller speed and aeration rate on the separating effect was investigated. And the optimum process conditions of flotation were confirmed. The results show that the agent dosage, pulp concentration, impeller speed and aeration rate have a significant impact on flotation recovery and en- richment of macerals. The float recovery was 73.28% and enrichment ratio of vitrinite was 83.89% when CTAB dosage of 1.0 kg/t, pulp concentration of 100 g/L, impeller speed of 1 700 r/min and aeration rate of 0.25 m3/（m2·min） were used. The tailings yield was 60.30% and enrichment ratio of inertinite was 61.44% when CTAB dosage of 0.5 kg/t, pulp concentration of 100 g/L, impeller speed of I 700 r/min and aeration rate of 0.20 m3/（m2·min） were used.
基金supported by the RESEAT program funded by the Ministry of Science,ICT and Future Planning through the National Research Foundation of Koreaby the National Research Laboratory Program of the National Research Foundation(No.2008-0060153)of Korea
文摘The shell and tube heat exchanger is an essential part of a power plant for recovering heat transfer between the feed water of a boiler and the wasted heat.The baffles are also an important element inside the heat exchanger.Internal materials influence the flow pattern in the bed.The influence of baffles in the velocity profiles was observed using a three-dimensional particle image velocimetry around baffles in a horizontal circular tube.The velocity of the particles was measured before the baffle and between them in the test tube.Results show that the flows near the front baffle flow were parallel to the vertical wall,and then concentrate on the upper opening of the front baffle.The flows circulate in the front and rear baffles.These flow profiles are related to the Reynolds number(Re) or the flow intensity.The velocity profiles at lower Re number showed a complicated mixing,concentrating on the lower opening of the rear baffle as front wall.Swirling flow was employed in this study,which was produced using tangential velocities at the inlet.At the entrance of the front baffle,the velocity vector profiles with swirl were much different from that without swirl.However,velocities between two baffles are not much different from those without swirl.
