Chemical, physical, structural and morphological properties of zinc leaching residue were examined by the combination of various detection means such as AAS, XRF, XRD, M？ssbauer spectrometry, SEM-EDS, TG-DSC, XPS and...Chemical, physical, structural and morphological properties of zinc leaching residue were examined by the combination of various detection means such as AAS, XRF, XRD, M？ssbauer spectrometry, SEM-EDS, TG-DSC, XPS and FTIR. The toxicity characteristic leaching procedure （TCLP） was used to investigate the environmental activity of zinc leaching residue for a short contact time. The phase composition analysis indicated that the zinc leaching residue mainly consists of super refined flocculent particles including zinc ferrite, sulfate and silicate. The physical structural analysis showed that it has a thermal instability and strong water absorption properties. The results of TCLP indicated that the amounts of Zn and Cd in the leaching solution exceed 40 and 90 times of limit, respectively, which demonstrate that this residue is unstable in weak acidic environment for a short contact time.展开更多
TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstru...TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.展开更多
A novel rheocasting process, self-inoculation method （SIM）, was developed for the microstructure control of semisolid wrought Mg alloy. This process involves mixing between liquid alloy and particles of solid alloy ...A novel rheocasting process, self-inoculation method （SIM）, was developed for the microstructure control of semisolid wrought Mg alloy. This process involves mixing between liquid alloy and particles of solid alloy （self-inoculants）, subsequently pouring the mixed melt into a special designed multi-stream fluid director. The primary phase with dendritic morphology in the conventionally cast AZ31 alloy has readily transformed into near spherical one in the slurry produced by SIM from melt treatment temperature between 690 ℃ and 710 ℃ and self-inoculants addition of 3%-7%. Achievement of the non-dendritic microstructure at the higher melt treatment temperature requires more self-inoculants addition or decreases in the slope angle of fluid director. Primary phase in the slurry thus produced has attained an ideally globular morphology after isothermal holding at 620 ℃ for 30 s. The increasing holding time leads to decrease of shape factor but the coarsening of particle size. The spheroidization and coarsening evolution process of solid particles during the isothermal holding were analyzed by Lifshitz-Slyozov-Wagner （LSW） theory.展开更多
This paper relates to Stockhausen＇s composition method of the 1970s based on the concept called ＂formula＂. This method is in part a derivation and in part an improvement of serialism. Stockhausen applied it in his ...This paper relates to Stockhausen＇s composition method of the 1970s based on the concept called ＂formula＂. This method is in part a derivation and in part an improvement of serialism. Stockhausen applied it in his works starting from 1970, with the composition Mantra for two pianos and ring modulator, and refined it during his whole life. This paper will discuss the formula＇s concept and his application. In particular, the author tries to analyze the first composition where the formula＇s method is applied under two different points of view： the composition method and the rule of technology in the composition.展开更多
基金Project(2011AA061001)supported by the Hi-Tech Research and Development Program of ChinaProject(50830301)supported by theKey Program of National Natural Science Foundation of ChinaProject(50925417)supported by the National Science Fund for Distinguished Young Scientists of China
文摘Chemical, physical, structural and morphological properties of zinc leaching residue were examined by the combination of various detection means such as AAS, XRF, XRD, M？ssbauer spectrometry, SEM-EDS, TG-DSC, XPS and FTIR. The toxicity characteristic leaching procedure （TCLP） was used to investigate the environmental activity of zinc leaching residue for a short contact time. The phase composition analysis indicated that the zinc leaching residue mainly consists of super refined flocculent particles including zinc ferrite, sulfate and silicate. The physical structural analysis showed that it has a thermal instability and strong water absorption properties. The results of TCLP indicated that the amounts of Zn and Cd in the leaching solution exceed 40 and 90 times of limit, respectively, which demonstrate that this residue is unstable in weak acidic environment for a short contact time.
基金Projects(51072104,51272141)supported by the National Natural Science Foundation of ChinaProject(ts20110828)supported by Taishan Scholars Project of Shandong,China
文摘TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.
基金Project (2007CB613700) supported by the National Basic Research Program of ChinaProject (50964010) supported by the National Natural Science Foundation of China
文摘A novel rheocasting process, self-inoculation method （SIM）, was developed for the microstructure control of semisolid wrought Mg alloy. This process involves mixing between liquid alloy and particles of solid alloy （self-inoculants）, subsequently pouring the mixed melt into a special designed multi-stream fluid director. The primary phase with dendritic morphology in the conventionally cast AZ31 alloy has readily transformed into near spherical one in the slurry produced by SIM from melt treatment temperature between 690 ℃ and 710 ℃ and self-inoculants addition of 3%-7%. Achievement of the non-dendritic microstructure at the higher melt treatment temperature requires more self-inoculants addition or decreases in the slope angle of fluid director. Primary phase in the slurry thus produced has attained an ideally globular morphology after isothermal holding at 620 ℃ for 30 s. The increasing holding time leads to decrease of shape factor but the coarsening of particle size. The spheroidization and coarsening evolution process of solid particles during the isothermal holding were analyzed by Lifshitz-Slyozov-Wagner （LSW） theory.
文摘This paper relates to Stockhausen＇s composition method of the 1970s based on the concept called ＂formula＂. This method is in part a derivation and in part an improvement of serialism. Stockhausen applied it in his works starting from 1970, with the composition Mantra for two pianos and ring modulator, and refined it during his whole life. This paper will discuss the formula＇s concept and his application. In particular, the author tries to analyze the first composition where the formula＇s method is applied under two different points of view： the composition method and the rule of technology in the composition.
