Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is propose...Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is proposed in this paper. The new topology can correspond to a 90 plus percent of power converting. So,a novel topology of an state of art integrated circuit, which can be used as power management circuit, has been designed based on the above new topology. A simulator which is specifically suitable for the power controller has been founded in this work and it has been used for the simulation of the novel architecture and the proposed integrated circuit.展开更多
The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiment...The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiments and simulations. Two kinds of cylindrical compression samples were cut from the AZ31 extruded rod: one was cut with the compression direction parallel to the extruded direction(ED), and the other was cut with the compression axis perpendicular to the ED. The samples were termed as C//ED sample and C⊥ED sample, respectively. The results indicate that the general characteristics of flow curves and texture evolutions in both C⊥ED and C//ED samples during compression can be well explained by the relative activities of deformation mechanisms, which show a strong orientation dependence on the initial textures and the current texture. A significant yield behavior can be induced by {10-12} twinning at the starting deformation, and the lower yield stress in C⊥ED sample can be enhanced by the high activity of basal slip. The work hardening behavior is related to the activities of basal slip, pyramidal <c+a> slip, {10-12} twinning, as well as {10-11} twinning. However, the activity of prismatic slip is insensitive to the starting texture, and mostly negligible in all samples.展开更多
基金supported by Program for New Century Excellent Talents in University(NCET)(2008)Funding Project for Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality+1 种基金 (PHR(IHLB)) and Beijing Novel Research Star(2005B01)Ministry of Beijing Science and Technology
文摘Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is proposed in this paper. The new topology can correspond to a 90 plus percent of power converting. So,a novel topology of an state of art integrated circuit, which can be used as power management circuit, has been designed based on the above new topology. A simulator which is specifically suitable for the power controller has been founded in this work and it has been used for the simulation of the novel architecture and the proposed integrated circuit.
基金supported by the National Natural Science Foundation of China(Grant No.51301040)
文摘The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiments and simulations. Two kinds of cylindrical compression samples were cut from the AZ31 extruded rod: one was cut with the compression direction parallel to the extruded direction(ED), and the other was cut with the compression axis perpendicular to the ED. The samples were termed as C//ED sample and C⊥ED sample, respectively. The results indicate that the general characteristics of flow curves and texture evolutions in both C⊥ED and C//ED samples during compression can be well explained by the relative activities of deformation mechanisms, which show a strong orientation dependence on the initial textures and the current texture. A significant yield behavior can be induced by {10-12} twinning at the starting deformation, and the lower yield stress in C⊥ED sample can be enhanced by the high activity of basal slip. The work hardening behavior is related to the activities of basal slip, pyramidal <c+a> slip, {10-12} twinning, as well as {10-11} twinning. However, the activity of prismatic slip is insensitive to the starting texture, and mostly negligible in all samples.
