为探索煤炭精细分级分选,优化生产系统,淮北选煤厂对煤泥重介质旋流器及粗煤泥振动弧形筛进行了优化,通过采用大直径煤泥重介质旋流器,改变弧形筛工艺参数,增加筛面喷水,稳定斜管浓缩机溢流等措施,加强重介分选环节对>0.25 m m粒级...为探索煤炭精细分级分选,优化生产系统,淮北选煤厂对煤泥重介质旋流器及粗煤泥振动弧形筛进行了优化,通过采用大直径煤泥重介质旋流器,改变弧形筛工艺参数,增加筛面喷水,稳定斜管浓缩机溢流等措施,加强重介分选环节对>0.25 m m粒级煤炭的精选,降低了重介系统分选下限,有效控制了粗精煤灰分、水分;降低了浮选入浮量、粒度、灰分,减轻了浮选系统的压力。同时通过采用“2+2”浮选工艺,降低了浮选精煤灰分,避免了重介精煤“背灰”现象,实现了精煤产率最大化。展开更多
Ultrasound with different intensities was applied to treating AZ80 alloy melt to improve its solidification structure.The average grain size of the alloy could be decreased from 303 to 148 μm after the ultrasound wit...Ultrasound with different intensities was applied to treating AZ80 alloy melt to improve its solidification structure.The average grain size of the alloy could be decreased from 303 to 148 μm after the ultrasound with intensity of 30.48 W/cm2 was applied.To gain insight into the mechanism of ultrasonic treatment which affected the microstructure of the alloy,numerical simulations were carried out and the effects of different ultrasonic pressures on the behaviors of cavitation bubble in the melt were studied.The ultrasonic field propagation in the melt was also characterized.The results show that samples from different positions are subjected to different acoustic pressures and the effect of grain refinement by ultrasonic treatment for these samples is different.With the increase of ultrasonic intensity,the acoustic pressure is increased and the grain size is decreased generally.展开更多
Al-7.5Si-4Cu cast alloy melt modified by Al-5Ti-B, RE and Al-10Sr master alloys were poured in the chromite sand moulds, to investigate comparatively the effects of individual or combined additions of grain refiners a...Al-7.5Si-4Cu cast alloy melt modified by Al-5Ti-B, RE and Al-10Sr master alloys were poured in the chromite sand moulds, to investigate comparatively the effects of individual or combined additions of grain refiners and modifiers on the mechanical properties, microstructures, grain refining and modification, and intermetallic compounds of the alloy. The results show that the mechanical properties and the microstructures of Al-7.5Si-4Cu cast alloys are improved immensely by combining addition of 0.8%Al-5Ti-B, 0.1%RE and 0.1%Al-10Sr grain refiners and modifiers compared with the individual addition and cast conditions. For individual addition condition, addition of 0.8%Al-5Ti-B master alloy can obtain superior tensile strength, Brinell hardness and finer equiaxedα（Al） dendrites. The alloy with 0.1%RE master alloy shows the highest improvement in ductility because the rare earth can purify the molten metal and change the shape of intermetallic compounds. While the alloy with 0.1%Al-10Sr modifier shows only good improvement in yield strength, and the improvement of other performance is unsatisfactory. The Al-10Sr modifier has a significant metamorphism for the eutectic silicon, but will make the gas content in the aluminum alloy melt increase to form serious columnar grain structures. The effects of grain refining and modification on mean area and aspect ratio have the same conclusions obtained in the mechanical properties and the microstructures analyses.展开更多
The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental resul...The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.展开更多
The evaluation on the callus embryogenesis capacity of 15 genotypes of citrus showed that stress treatments were conducive to somatic embryogenesis and could enhance the recovery of the missed capacity of embryogenes...The evaluation on the callus embryogenesis capacity of 15 genotypes of citrus showed that stress treatments were conducive to somatic embryogenesis and could enhance the recovery of the missed capacity of embryogenesis for some genotypes. Randomly amplified polymorphic DNA (RAPD) and methylation sensitive amplified polymorphism (MSAP) analysis indicated that there existed significant differences in DNA methylation status between the callus capable of producing somatic embryoids and that which missed the embryogenesis capacity of the same genotype Newhall navel orange ( Citrus sinensis Osb. cv. Newhall). The DNA methylation level of the former was lower than that of the latter. However, RAPD profiles did not show any difference between these two kinds of callus.展开更多
In order to optimize the ductility of orthorhombic Ti2AlNb-based alloys sheet,Ti22Al27Nb sheet was treated by high density electropulsing（J max =6.80 7.09 kA/mm2,tp =110 μs） under ambient condition.Microstructures ...In order to optimize the ductility of orthorhombic Ti2AlNb-based alloys sheet,Ti22Al27Nb sheet was treated by high density electropulsing（J max =6.80 7.09 kA/mm2,tp =110 μs） under ambient condition.Microstructures were observed by SEM,and the tensile properties were also studied using uniaxial tension tests.The experimental results show that electropulsing can refine the microstructures of Ti22Al27Nb sheets.The specimen with the fine and homogeneous microstructures has good plasticity,and its elongation reaches 19.4%.The mechanism about the effect of electropulsing treatment on the microstructure of Ti22Al27Nb sheets was discussed.It was thought that the increase in nucleation rate during phase transformation and a very short treating time were regarded as the main reasons of producing smaller grains and increase in the plasticity by electropulsing.展开更多
文摘为探索煤炭精细分级分选,优化生产系统,淮北选煤厂对煤泥重介质旋流器及粗煤泥振动弧形筛进行了优化,通过采用大直径煤泥重介质旋流器,改变弧形筛工艺参数,增加筛面喷水,稳定斜管浓缩机溢流等措施,加强重介分选环节对>0.25 m m粒级煤炭的精选,降低了重介系统分选下限,有效控制了粗精煤灰分、水分;降低了浮选入浮量、粒度、灰分,减轻了浮选系统的压力。同时通过采用“2+2”浮选工艺,降低了浮选精煤灰分,避免了重介精煤“背灰”现象,实现了精煤产率最大化。
基金Projects (2007CB613701,2007CB613702) supported by the National Basic Research Program of ChinaProjects (50974037,50904018) supported by the National Natural Science Foundation of ChinaProject (NCET-08-0098) supported by the Program for New Century Excellent Talents in University of China
文摘Ultrasound with different intensities was applied to treating AZ80 alloy melt to improve its solidification structure.The average grain size of the alloy could be decreased from 303 to 148 μm after the ultrasound with intensity of 30.48 W/cm2 was applied.To gain insight into the mechanism of ultrasonic treatment which affected the microstructure of the alloy,numerical simulations were carried out and the effects of different ultrasonic pressures on the behaviors of cavitation bubble in the melt were studied.The ultrasonic field propagation in the melt was also characterized.The results show that samples from different positions are subjected to different acoustic pressures and the effect of grain refinement by ultrasonic treatment for these samples is different.With the increase of ultrasonic intensity,the acoustic pressure is increased and the grain size is decreased generally.
基金Project (09C26279200863) supported by Technology Innovation Fund Project of High-tech Small and Medium Enterprises,Ministry of Science and Technology of ChinaProject (BA2011084) supported by Special Fund Project on Science and Technology Achievement Transformation of Jiangsu Province,China
文摘Al-7.5Si-4Cu cast alloy melt modified by Al-5Ti-B, RE and Al-10Sr master alloys were poured in the chromite sand moulds, to investigate comparatively the effects of individual or combined additions of grain refiners and modifiers on the mechanical properties, microstructures, grain refining and modification, and intermetallic compounds of the alloy. The results show that the mechanical properties and the microstructures of Al-7.5Si-4Cu cast alloys are improved immensely by combining addition of 0.8%Al-5Ti-B, 0.1%RE and 0.1%Al-10Sr grain refiners and modifiers compared with the individual addition and cast conditions. For individual addition condition, addition of 0.8%Al-5Ti-B master alloy can obtain superior tensile strength, Brinell hardness and finer equiaxedα（Al） dendrites. The alloy with 0.1%RE master alloy shows the highest improvement in ductility because the rare earth can purify the molten metal and change the shape of intermetallic compounds. While the alloy with 0.1%Al-10Sr modifier shows only good improvement in yield strength, and the improvement of other performance is unsatisfactory. The Al-10Sr modifier has a significant metamorphism for the eutectic silicon, but will make the gas content in the aluminum alloy melt increase to form serious columnar grain structures. The effects of grain refining and modification on mean area and aspect ratio have the same conclusions obtained in the mechanical properties and the microstructures analyses.
基金Projects(51074031,51271042,50874022)supported by the National Natural Science Foundation of ChinaProject(2013M530913)supported by the China Postdoctoral Science FoundationProject(DUT12RC(3)35)supported by the Fundamental Research Funds for the Central Universities of China
文摘The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.
文摘The evaluation on the callus embryogenesis capacity of 15 genotypes of citrus showed that stress treatments were conducive to somatic embryogenesis and could enhance the recovery of the missed capacity of embryogenesis for some genotypes. Randomly amplified polymorphic DNA (RAPD) and methylation sensitive amplified polymorphism (MSAP) analysis indicated that there existed significant differences in DNA methylation status between the callus capable of producing somatic embryoids and that which missed the embryogenesis capacity of the same genotype Newhall navel orange ( Citrus sinensis Osb. cv. Newhall). The DNA methylation level of the former was lower than that of the latter. However, RAPD profiles did not show any difference between these two kinds of callus.
基金Project(50875061) supported by the National Natural Science Foundation of ChinaProject(20092302110016) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘In order to optimize the ductility of orthorhombic Ti2AlNb-based alloys sheet,Ti22Al27Nb sheet was treated by high density electropulsing（J max =6.80 7.09 kA/mm2,tp =110 μs） under ambient condition.Microstructures were observed by SEM,and the tensile properties were also studied using uniaxial tension tests.The experimental results show that electropulsing can refine the microstructures of Ti22Al27Nb sheets.The specimen with the fine and homogeneous microstructures has good plasticity,and its elongation reaches 19.4%.The mechanism about the effect of electropulsing treatment on the microstructure of Ti22Al27Nb sheets was discussed.It was thought that the increase in nucleation rate during phase transformation and a very short treating time were regarded as the main reasons of producing smaller grains and increase in the plasticity by electropulsing.
