铝合金板织构组分单晶屈服轨迹计算

织构单晶体组分研究是分析多晶体板材塑性各向异性的基础。文章利用晶体学屈服函数CMTP方法,结合塑性力学知识计算得到6个常见单晶体织构组分产生的屈服轨迹形状,分析织构组分对板材各向异性影响,结果表明,6种织构组分在不同拉伸坐标系中产生的单晶屈服轨迹呈多边形或椭圆形,并随散布宽度增加而扩大。{001}<100>织构组分有利于多晶体板材产生各向同性,{123}<634>织构组分则易于形成各向异性。

材料织构组分(宏观对称型)分数的定量确定

提出一定量确定有宏观对称的立方系材料中织构组分的体积分数的数模。

N36锆合金管材的织构研究

利用X射线衍射测试技术,对N36锆合金成品管材的织构进行了测量。利用极图、织构取向因子,特别是采用三维晶体学取向分布函数等表征手段,系统分析了N36锆合金成品管材的织构特征。研究结果表明,N36锆合金成品管材的主要织构组分为基面型(0002)<1120>;管材径向上织构取向因子最大,大多数晶粒的[0002]基极集中在与管材的轴向垂直的ND-TD面上,并且偏离径向30°左右呈现典型双峰分布;除基面类型织构组分外,N36锆合金管材还存在一些相对强度比(0002)基面类型织构更高的锥面类型织构,而柱面类型织构较弱。

Morphology and chemical composition of γ/γ' phases in Re-containing Ni-based single crystal superalloy during two-step aging

The γ/γ＇ microstructure of a Re-containing Ni-based single crystal super alloy after a two-step aging was studied using scanning electron microscopy （SEM）,transmission electron microscopy （TEM） and scanning transmission electron microscopy （STEM）.The crystals were grown by the floating zone （FZ） method.Both cuboidal and spherical γ＇ precipitates were formed after a two-step aging.The size of the cuboidal γ＇ phases first increased and then decreased with the extension of the second-step aging time.Re,Co and Cr strongly concentrated in the γ phase whereas Ni and Al enriched in the γ＇ phase.Thermodynamic calculation by JMatPro was performed to explain the experimental observations.

Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process

TA2/TA15 graded structural material（GSM） was fabricated by the laser additive manufacturing（LAM） process. The chemical composition, microstructure and micro-hardness of the as-deposited GSM were investigated. The results show that the TA2 part of exhibiting near-equiaxed grains was Widmanst？tten α-laths microstructure. The TA15 part containing large columnar grains was fine basket-weave microstructure. The graded zone was divided into four deposited layers with 3000 μm in thickness. As the distance from the TA2 part increases, the alloy element contents and the β phase volume fraction increase, the α phase volume fraction decreases and the microstructure shows the evolution from Widmanst？tten α-laths to basket-weave α-laths gradually. The micro-hardness increases from the TA2 part to the TA15 part due to the solid solution strengthening and grain boundary strengthening.

Cytological Studies on the Development of Sieve Element and Floral Nectary Tissue in Arabidopsis thaliana

Ultrastructural changes in the sieve element and dense cells of nectariferous tissue during the development of floral nectary in Arabidopsis thaliana L. were investigated with transmission electron microscopy. Samples were prepared with high pressure freezing and freeze substitution techniques. The ultrastructure of dense cell was similar to that of sieve element at its early developmental stage. With the concurrent agglutination of chromatin in the nucleus, the abnormal location of organelles and the high density of cytoplasm, the ultrastructural characteristics in die dense cells of the nectariferous tissue and in the sieve element are matched with those of the programmed cell death in animal and plant reported in recent years. The disorganization of nucleus and most organelles in the differentiation of sieve elements and dense cells is closely associated with the transportation and modification of pre-nectar and the transference of nectar. This suggests that the cytological changes in sieve element and nectariferous tissue are closely associated with the nectary functional activities.

A 3D-QSAR Study on a Novel Chromanol Class of I_ (Ks) Potassium Channel Blockers

Aim and Method A novel three-dimensional quantitative structure-activityrelationship (3D-QSAR) method, self-organizing molecular field analysis (SOMFA) , was used toinvestigate the correlation between the molecular properties and a class of chromanol analogs asI_(Ks) blockers. Results The cross-validated correlation coefficient q^2 values (0.698) and noncross-validated correlation coefficient r^2 values (0.701) proved a good conventional statisticalcorrelation. Conclusion The final SOMFA model has therefore good predictive activity for the furthermolecular design of chromanol I_(Ks) potassium channel blockers.

Practice of Project Management Methodology for Commercial Aero engines Based on Integrative Project Architectures

To collect and share information of projects or products and make it consistent and correct so that the quality and costs of projects can be effectively controlled,an integrative project architecture integrating different types of breakdown structures is necessary.In this paper,the international research status on work breakdown structure(WBS)was analyzed,and an integrative project architecture for commercial aero-engines was designed,where product breakdown structure(PBS),WBS,organization breakdown structure(OBS)and cost breakdown structure(CBS)were integrated and built.And the architecture was applied in information systems.A transfer from technological views of complex products through their lifecycles to management views has been realized with this standardized architecture,thus development tasks and costs can be controlled.

Metrically measuring liver biopsy:A chronic hepatitis B and C computer-aided morphologic description

AIM： To describe a quantitative analysis method for liver biopsy sections with a machine that we have named ＂Dioguardi Histological Metriser＂ which automatically measures the residual hepatocyte mass （including hepatocytes vacuolization）, inflammation, fibrosis and the loss of liver tissue tectonics.METHODS： We analysed digitised images of liver biopsy sections taken from 398 patients, The analysis with Dioguardi Histological Metriser was validated by comparison with semi-quantitative scoring system.RESULTS： The method provides： （1） the metrical extension in two-dimensions （the plane） of the residual hepatocellular set, including the area of vacuoles pertinent to abnormal lipid accumulation; （2） the geo- metric measure of the inflammation basin, which distinguishes intra-basin space and extra-basin dispersed parenchymal leukoo/tes; （3） the magnitude of collagen islets, （which were considered truncated fractals and classified into three degrees of magnitude）; and （4） the tectonic index that quantifies alterations （disorders） in the organization of liver tissue. Dioguardi Histological Metriser machine allows to work at a speed of 0.1 mm^2/s, scanning a whole section in 6-8 min.CONCLUSION： The results are the first standardized metrical evaluation of the geometric properties of the parenchyma, inflammation, fibrosis, and alterations in liver tissue tectonics of the biopsy sections. The present study confirms that biopsies are still valuable, not only for diagnosing chronic hepatitis, but also for quantifying changes in the organization and order of liver tissue structure.

Theoretical design and distribution control of precipitates and solute elements in Al−Zn−Mg−Cu alloys with heterostructure

In order to simultaneously improve strength and formability,an analytical model for the concentration distribution of precipitates and solute elements is established and used to theoretically design and control the heterogeneous microstructure of Al−Zn−Mg−Cu alloys.The results show that the dissolution of precipitates is mainly affected by particle size and heat treatment temperature,the heterogeneous distribution level of solute elements diffused in the alloy matrix mainly depends on the grain size,while the heat treatment temperature only has an obvious effect on the concentration distribution in the larger grains,and the experimental results of Al−Zn−Mg−Cu alloy are in good agreement with the theoretical model predictions of precipitates and solute element concentration distribution.Controlling the concentration distribution of precipitates and solute elements in Al−Zn−Mg−Cu alloys is the premise of accurately constructing heterogeneous microstructure in micro-domains,which can be used to significantly improve the formability of Al−Zn−Mg−Cu alloys with a heterostructure.

Computer aided modeling and pore distribution of bionic porous bone structure

Artificial bone with porous structure is crucial for tissue scaffold and clinic implants.Scaffold provides structure support for cells and guides tissues regeneration for final tissue structure.A computational aided process of porous bone modeling was developed which described the design and fabrication of tissue scaffolds by considering intricate architecture,porosity and pore size.To simulate intricate bone structure,different constructive units were presented.In modeling process,bone contour was gotten from computed tomography(CT)images and was divided into two levels.Each level was represented by relatively reconstructive process.Pore size distribution was controlled by using mesh generation.The whole hexahedral mesh was reduced by unit structure,when a 3D mesh with various hexahedral elements was provided.The simulation results show that constructive structure of porous scaffold can meet the needs of clinic implants in accurate and controlled way.

Analysis of 13Cr bloom solidification structure using CA-FE model

Solidification structure is critical in the control of the mechanical properties and quality during the continuous casting process. The thermo-physical properties of 13 Cr steel added some rare metals, such as Mo, V, Nb, are measured to better understand the solidification structure of 13 Cr bloom. A computational model using CA-FE(cellular automation-finite element) method coupled with heat transfer model is developed to describe the solidification structure in continuous casting process. It is found that the calculated solidification structure is in good agreement with the observed data. The influence of casting speed and superheat on the solidification structure of the bloom is studied in detail. In order to obtain more equiaxed crystal ratio and low degree of the segregation in the bloom, the optimized casting speed 0.6 m/min and superheat less than 25 °C are determined for the caster. Using the optimized manufacturing parameters, these samples are 60% with the equiaxed zone ratio of 8%–10% and below the degree of segregation 1.05.

New advances in coal structure model

Although human beings have come to understand and utilize coal for a very long history, no theoretical breakthrough in the study of coal structure has been made, which still needs continuous efforts of coal chemical workers. Based on the viewpoint of ‘vague/clear', the species classification and accurate analysis on coal were conducted by using the natural clustering all-component separation method. A more systematic and detailed coal embedded structure model theory which is suitable for coal of all ranks was developed from the previous one and a more complete theoretical system about the component and structure of coal was constructed. The whole establishment process of the theory was summarized and some of the main support data and analysis test results, including TEM, AFM, FTIR, GC/MS, MALDI/TOF/MS, DART/MSD, fractal analysis and so on were provided. The coal embedded structure theory fully considers both the identity and the particularity of all-rank coal, reflects the coal component and structure in the full range of coal rank, solves the systematic cognitive problem of coal component and structure on macro and micro level, and provides a valuable and meaningful theoretical approach for the coal processing and conversion technology.

Clinical features of AIDS patients with Hodgkin's lymphoma with isolated bone marrow involvement:report of 12 cases at a single institution

Objective： To study the main clinical and histopathological features of 12 patients with Hodgkin＇s lymphoma （HL） diagnosed primarily from bone marrow （BM） involvement. Methods： We included 12 acquired immunodeficiency syndrome （AIDS） patients with HL assisted in the F. J. Mufiiz Infectious Diseases Hospital since January 2002 to December 2013. The diagnosis of ilL with primary BM involvement in patients was confirmed by clinical, histopathological, and immunohistochemical findings. Results： All patients presented ＂B＂ symptoms and pancytopenia. All of them had stage IV neoplasm disease because of BM infiltration. The median of CD4＋ T-cell counts was 114 cells/μL, and mixed cellularity （MC） was the most frequent histopathological subtype of 92% cases. Conclusion： When other causes are excluded, BM biopsy should be performed in AIDS patients with ＂B＂ symptoms and pancytopenia to evaluate BM infiltration by atypical lymphocytes.

Effects of mechanical activation on the structural changes and microstructural characteristics of the components of ferruginous quartzite beneficiation tailings

The effects of mechanical activation in a planetary mill on the structural changes and microstructural characteristics of the components of ferruginous quartzite beneficiation railings generated by wet magnetic separation process were studied using X-ray and laser diffraction methods. The results revealed the relationship between variations in the mean particle size of activated powders and the milling time. The crystallite size, microstrain, lattice parameters and unit cell volumes were determined for different milling times in powder samples of quartz, hematite, dolomite, and magnetite from the beneficiation tailings. The main trends in the variation of the crystallite size of quartz, hematite, dolomite, and magnetite as a function mean particle size of powder samples were revealed. Changes in the particle shape as a function of the activation time was also investigated.

Robust Background Subtraction Method via Low-Rank and Structured Sparse Decomposition

Background subtraction is a challenging problem in surveillance scenes. Although the low-rank and sparse decomposition(LRSD) methods offer an appropriate framework for background modeling, they fail to account for image's local structure, which is favorable for this problem. Based on this, we propose a background subtraction method via low-rank and SILTP-based structured sparse decomposition, named LRSSD. In this method, a novel SILTP-inducing sparsity norm is introduced to enhance the structured presentation of the foreground region. As an assistance, saliency detection is employed to render a rough shape and location of foreground. The final refined foreground is decided jointly by sparse component and attention map. Experimental results on different datasets show its superiority over the competing methods, especially under noise and changing illumination scenarios.

Case Study of Service Oriented Enterprise Architecture Framework

Many organizations have now adopted Service Oriented Architecture （SOA） as an architectural style to help them with architecture, design and implementation of their core services and systems. Most of these organizations are challenged in integrating SOA style with their overall Enterprise Architecture work. This framework links an SOA style with the Enterprise Architecture （EA） methodologies to help organizations organize their SOA effort as a key part of their Enterprise Architecture. The case study demonstrates the implementation of architecture goal with organization vision in service oriented organizational structure using services that align Business with Technology. The framework is validated and has reserved the privileges of SOA and EA.

Competitiveness of Travel Agencies in the European Tourism Market

The concept of competitiveness influenced by many factors is analyzed in terms of terminology distinctions. This is the reason of numerous definitions of this term included in the first part of the paper, which varies according to the aspect of the analysis, analyzed marketing unit, tourism product, geographical unit, region, destination, or entities that offer an acceptable integrated product a package by specific indicators for comparison of elements of competitiveness. The first part of the article theoretically emphasizes the distinction in defining the concept of competitiveness from various aspects of the analyzed market subjects （different features and facilities provided）, and from those aspects of their specific business relationship in the market. Special contribution to the study of competitiveness is contained in the second part of the paper that analyzes the existing situation of intermediation in the European tourism market. This research is based on using the data of descriptive statistics and the secondary research which gives insights into the business of travel agencies, using the data such as number of employees, annual personnel costs, and the average annual cost per person employed in travel agencies in some European countries. The changes in the environment, and the competition initiate a need for an analysis of the internal environment, travel agencies＇ tasks, and their organizational structure. Also, the results conducted research on a sample of 500 travel agencies in 20 European countries indicate the dominance of quality service, price, and value for money as key factors of demand for achieving the competitiveness. It indicates new trends focused on needs for more specific--integrated tourist products that ensure the quality of service, value for money, and for the time that tourists invest in their obtaining.

Value Creation of Business Process Management （BPM） and Managerial Accounting System （MAS）： A Case Study

This paper explores the value creation of business process management （BPM） and managerial accounting system （MAS） using a case study. The findings show that BPM shortens the management chain and increases the connections among functions in the organization by right reassignment. Accounting indicators in MAS provide necessary information about business processes, which assists performance evaluation in BPM, and meanwhile, incentive schemes give enough motives, which guide employees to take actions in accordance with the organizational strategies and processes＇ goals. The information effect and motive effect of MAS increase employees＇ work satisfaction and their cooperation with each other. In the end, the integration of BPM and MAS improves the organizational economic performance, thus creating value for the organization. The results explain the reason why so much BPM fails in practice, because right assignment, performance evaluation system, and incentive schemes constitute organizational architecture, which is critical to organizational value. Additionally, the value creation of BPM and MAS depends on their coordination with the external environment, the internal situation, and the organizational strategy. From the view of managerial accounting perspective, MAS not only changes with the organization development but also facilitates the organization development.

Relationship between Pectic Substances and Strand Separation of Cooked Spaghetti Squash--Part 2. Changes in Firmness, Histological Structure and Pectic Substances during Soaking in Pectin Extractants

The flesh of spaghetti squash separates into strands when cooked. The purpose of this paper is to investigate the cause of strand separation （during cooking） by soaking for 24 h at 35 ℃ in solutions with three kinds of pectin extractant. The changes in strand separation, firmness, histological structure and the pectin of flesh during soaking in 0.01 N HCI solution （pH 2.0）, 0.035 M ammonium oxalate solution （pH 4.0） or 2% sodium hexametaphosphate solution （pH 4.0） were investigated. When flesh was soaked in the HCI solution, the separation into strands and removal of calcium and magnesium were greater than that soaked in other pectin extractants. High methoxyl pectin was extracted by soaking in HC1 solution （pH 2.0） due to removal of polyvalent cations. This result shows that high methoxyl pectin glues strands together in the flesh of spaghetti squash. The shape of the cells which constituted strands was round; on the other hand, that of cells surrounded strands was elongated. When cooked in boiling water or soaked at pH 2.0, the shape of the former cells was maintained, but the latter cells, which contributed to adhesion between strands, broke down. Thus, the flesh separated into strands. When flesh was boiled for 15-30 min, pectin degraded and dissolved in the cooking solution; consequently, the flesh separated into strands and also the middle lamella of cell walls of strands separated. However, pectin remaining in strands maintained their crispness.