“材艺结合”的新专业探索

文章介绍了陶瓷行业消费模式的发展变化及陶瓷行业的新技术发展情况,分析了陶瓷材料及艺术人才的培养现状,提出了"材艺结合"新专业的基本建设思路。要将产品设计和陶瓷材料工程紧密联系起来,充分利用现代信息技术,建立"设计学知识体系+工学知识体系+人文艺术知识体系"融合的课程系列,培养具有陶瓷材料产品设计、材料工艺知识和能力融合的陶瓷材料工程与应用的高级工程技术人才。

Time-dependent effects in transient liquid phase bonding of 304L and Cp-Ti using an Ag-Cu interlayer

One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.

In-situ Micro-CT analysis of deformation behavior in sandwich-structured meta-stable beta Ti−35Nb alloy

Beta Ti−35Nb sandwich-structured composites with various reinforcing layers were designed and produced using additive manufacturing(AM)to achieve a balance between light weight and high strength.The impact of reinforcing layers on the compressive deformation behavior of porous composites was investigated through micro-computed tomography(Micro-CT)and finite element method(FEM)analyses.The results indicate that the addition of reinforcement layers to sandwich structures can significantly enhance the compressive yield strength and energy absorption capacity of porous metal structures;Micro-CT in-situ observation shows that the strain of the porous structure without the reinforcing layer is concentrated in the middle region,while the strain of the porous structure with the reinforcing layer is uniformly distributed;FEM analysis reveals that the reinforcing layers can alter stress distribution and reduce stress concentration,thereby promoting uniform deformation of the porous structure.The addition of reinforcing layer increases the compressive yield strength of sandwich-structured composite materials by 124%under the condition of limited reduction of porosity,and the yield strength increases from 4.6 to 10.3 MPa.

Synthesis,crystal structure and photo-physical properties of tris(4-methyl-2,5-diphenylpyridine)iridium for OLED

Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent materials.In this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical characteristics.Single crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute ethanol.The composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and XRD.The complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral configuration.As measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting profile.The complex has potential for application in the OLED industry.

Fabrication and ablation property of carbon/carbon composites with novel SiC-ZrB_2 coating

A novel SiC?ZrB2 coating was prepared using a two-step technique by slurry-sintering and chemical vapor reaction on carbon/carbon (C/C) composites. The SiC?ZrB2 coating was composed of the scattered ZrB2 phase and the continuous SiC phase. It was observed that a good adhesion was built between the coating and the C/C composites. The SiC?ZrB2 coating samples exhibited a better ablation resistance in comparison with the uncoated C/C composites. The SiO2?ZrO2 barrier layer, the heat dissipation of the gaseous products and the pinning effect of ZrO2 all contributed to the good ablation resistance of the SiC?ZrB2 coated composites.

大范围薪炭林建设及综合效益浅析

庐江县境内的３３３３．３ｈｍ２薪炭林建设基地是安徽最大的薪炭林点。在３３３３．３ｈｍ２林地中，不仅立地条件千差万别，林分状况也不尽相同。为了维护生态，减少投资，多产薪柴和提高经济效益，分别采用调整结构、补植加密、块状更新、材薪结合等方式，综合考虑，分类经营。既保证了其中以取薪为主的薪炭林（占总面积８０％）稳产高产，也保留了不产薪柴的竹林和杂灌（占总面积５％），还保留了用材林（占总面积１０％），并发展了小块状经济林（占总面积５％）。结果，不仅提高了薪柴单产，加大了林分密度，增加了立木蓄积量，使野生动物越来越多，同时，经济效益明显提高。５ａ共创直接经济效益３０００多万元，使大范围薪炭林综合建设取得了显著的经济效益。

Effect of NiAl content on phases and microstructures of TiC-TiB_2-NiAl composites fabricated by reaction synthesis

TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.

Microstructures,mechanical and oxidation behaviors of C/C composites modified by NiAl alloy

Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.

Effect of Mg on nucleation process of recrystallization in Al-Mg-Si/SiC_p composite

The recrystallization nucleation processes of two cold-rolled Al-Mg-Si/SiCpcomposites with different contents of Mg are investigated mainly by dynamic mechanical analyzer （DMA） and electron microscopy including high angle annular dark field scanning transmission electron microscopy （HAADF-STEM） andhigh-resolution transmission electron microscopy （HRTEM）. Internal friction and electron microscopy results show that solute atom clusters are present in association with dislocationsin supersaturated cold-rolled composites. During recrystallization process, the internal friction peak position of Al-Mg-Si/3SiCp/2Mg （volume fraction,%） is higher than that of Al-Mg-Si/3SiCp（volume fraction,%） due to more solute atom clusters formed in association with the dislocations in the cold-rolled composite with a much higher Mg content, indicating a strongerresistance for the recrystallization nucleation.

Beryllium-distribution in metallic glass matrix composite containing beryllium

The morphologies, sizes, compositions and volume fractions of dendritic phases in in situ Ti-based metallic glass matrix composites （MGMCs） containing beryllium （Be） with the nominal composition of Tia7Zr19Cu5V12Be17 （mole fraction, %） were investigated using XRD, SEM, EBSD, TEM, EDS and three-dimensional reconstruction method. Moreover, visualized at the nanoscale, Be distribution is confirmed to be only present in the matrix using scanning transmission electron microscopy-electron energy loss spectroscopy （STEM-EELS）. Based on these findings, it has been obtained that the accurate chemical compositions are Wi28.3Zr19.7Cu8V6.4Be37.6 （mole fraction, %） for glass matrix and Wi62.nZr18.aCu2.6V16.6 （mole fraction, %） for the dendritic phases, and the volume fractions are 38.5% and 61.5%, respectively. It is believed that the results are of particular importance for the designing of Be-containing MGMCs.

Recent development of LiNi_xCo_yMn_zO_2:Impact of micro/nano structures for imparting improvements in lithium batteries

The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.

Properties and microstructure of Cu/diamond composites prepared by spark plasma sintering method

Cu/diamond composites have been considered as the next generation of thermal management material for electronic packages and heat sinks applications. Cu/diamond composites with different volume fractions of diamond were successfully prepared by spark plasma sintering（SPS） method. The sintering temperatures and volume fractions（50%, 60% and 70%） of diamond were changed to investigate their effects on the relative density, homogeneity of the microstructure and thermal conductivity of the composites. The results show that the relative density, homogeneity of the microstructure and thermal conductivity of the composites increase with decreasing the diamond volume fraction; the relative density and thermal conductivity of the composites increase with increasing the sintering temperature. The thermal conductivity of the composites is a result of the combined effect of the volume fraction of diamond, the homogeneity and relative density of the composites.

DAMAGE DETECTION FOR COMPOSITE STRUCTURE UNDER TEMPERATURE CHANGES USING LAMB WAVES

A two-step method is proposed for detection and identification of invisible impact damage in composite structure under temperature changes using Lamb waves.First,a statistical outlier analysis is employed to distinguish whether the changes of Lamb wave signals are induced by damage within a monitoring area or are only affected by temperature changes.Damage indices are defined after the Lamb wave signals are processed by Fourier transform,and a Monte Carlo procedure is used to obtain the damage threshold value for the damage indices at the undamaged state.If the damage indices in the operation state exceed the threshold value,the presence of damage is determined.Then,a probabilistic damage imaging algorithm displaying probabilities of the presence of damage within the monitoring area is adopted to fuse information collected from multiple actuator-sensor paths to identify the location of damage.Damage indices under damaged state are used to generate the diagnostic image.Experimental study on a stiffened composite panel with random temperature changes is performed to demonstrate the effectiveness of the proposed method.

Influence of deformation passes on interface of SiC_p/Al composites consolidated by equal channel angular pressing and torsion

Powder mixture of pure Al and oxidized Si C was consolidated into 10%（mass fraction） Si Cp/Al composites at 250 °C by equal channel angular pressing and torsion（ECAP-T）. The valence states of Si for Si C particulates and Al for the as-consolidated composites were detected by X-ray photoelectron spectroscopy（XPS）. The interfacial bondings of the composites were characterized by scanning electron microscopy（SEM）. The elements at the interface were linearly scanned by energy dispersive spectroscopy（EDS） and the EDS mappings of Si and Al were also obtained. The values of the nanohardness at different positions within 2 μm from the boundary of Si C particulate were measured. The results show that after ECAP-T, interfacial reaction which inhibits injurious interfacial phase occurs between Al and the oxide layer of Si C, and the element interdiffusion which can enhance interfacial bonding exists between Al and Si C. As ECAP-T passes increase, the reaction degree is intensified and the element interdiffusion layer is thickened, leading to the more smooth transition of the hardness from Si C to Al.

RESPONSE SUPPRESSION OF COMPOSITES INDUCED BY BUFFETING AERODYNAMIC LOAD

One of the aerodynamic phenomena associated with high performance aircraft is the high frequency vortex induced buffeting. The buffeting load can lead to high cyclic strain and stress,dramatically reduce the fatigue life of composite structures. In this paper, piezoelectric patches are bonded on the surface of composite panel. The dynamic response of the structure is measured by using bonded piezoelectric sensors. Filtered adaptive control algorithm is used to control the strain of piezoelectric actuators actively, so as to increase the modal damping coefficient of the composite panel, suppress the dynamic response and improve the fatigue performance of the structure. The feasibility of this method is verified in model experiments.

用有烟碳fly ash制造自己充填性混凝土的方法

自己填充性混凝土特别强调高流动性，已打破了有史以来对混凝土材料的固有观念，这种革新在不少研究者的关心下正持续进行着。用自己充填性混凝土，将会收到施工强度大和耐久性的效果，而且有利于混凝土施工的现代化合理化和新工法的开发。

Effect of glass fibre(GF) addition on microstructure and tensile property of GF/Pb composites fabricated by powder metallurgy

GF/Pb compositeswerefabricated by the method of powder metallurgy, and the density, microstructure and tensile propertywerecharacterized considering the size and content ofglass fibre （GF）. The results show that relative densities decrease with increasing GF fraction, and the 50μm-GF reinforced specimens exhibit a better densification than the 300μm-GF reinforced ones. The GF particles distribute quite uniformly inPb matrix, and the composites fabricated at low sintering temperature （〈200℃） possess fine-grain microstructure. The addition of GF significantly improves the strength of the Pb composites, and the ultimate tensile strength of the Pb composite reinforcedwith the addition of 50μm-0.5% GF（mass fraction）is about 30MPa higher than that of GF-free sample. For all composites groups, increasing the reinforcement content from 0.5%to 2%（mass fraction）results in a decrease in both tensile strength and ductility.

Microstructure characteristics and mechanical properties of TiB/Ti-1.5Fe-2.25Mo composites synthesized in situ using SPS process

TiB/Ti-1.5Fe-2.25Mo composites were synthesized in situ using the spark plasma sintering （SPS） method at temperatures of 850-1150 °C. The effect of the sintering temperature on microstructure and mechanical properties of the composites was investigated. The results indicate that the aspect ratio of the in situ synthesized TiB whiskers in Ti alloy matrix decreases rapidly with an increase in sintering temperature. However, both the relative density of the sintered specimens and the volume content of TiB whiskers in composites increase with increasing sintering temperature. Thus, the bending strength of the composites synthesized using SPS process increases slowly with increasing the sintering temperature from 850 to 1150 °C. TiB/Ti-1.5Fe-2.25Mo composite synthesized at 1150 °C using SPS method exhibits the highest bending strength of 1596 MPa due to the formation of fine TiB whiskers in Ti alloy matrix and the dense microstructure of the composite.

Prediction of the thermo-elastic properties of knitted structural composites using FEM

It is a very important and complex task to estimate the thermo-elasticproperties of a textile structural composite. In this paper, the finite element method (FEM) wasused for the prediction of the orthotropic thermo-elastic properties of a composite reinforced byglass fiber knitted fabric. In order to define the final 3-D configuration of the loop reinforcingstructure, the interactions between the adjacent loops, the large displacement and the contactelements without friction were considered. The values predicted were compared with the experimentalresults.

Design and characterization of Ti6Al4V/20CoCrMo−highly porous Ti6Al4V biomedical bilayer processed by powder metallurgy

The aim of this work was to develop a Ti6Al4V/20CoCrMo−highly porous Ti6Al4V bilayer for biomedical applications.Conventional powder metallurgy technique,with semi-solid state sintering as consolidation step,was employed to fabricate samples with a compact top layer and a porous bottom layer to better mimic natural bone.The densification behavior of the bilayer specimen was studied by dilatometry and the resulting microstructure was observed by scan electron microscopy(SEM)and computed microtomography(CMT),while the mechanical properties and corrosion resistance were evaluated by compression and potentiodynamic tests,respectively.The results indicate that bilayer samples without cracks were obtained at the interface which has no negative impact on the densification.Permeability values of the highly porous layer were in the lower range of those of human bones.The compression behavior is dictated by the highly porous Ti6Al4V layer.Additionally,the corrosion resistance of Ti6Al4V/20CoCrMo is better than that of Ti6Al4V,which improves the performance of the bilayer sample.This work provides an insight into the important aspects of a bilayer fabrication by powder metallurgy and properties of Ti6Al4V/20CoCrMo−highly porous Ti6Al4V structure,which can potentially benefit the production of customized implants with improved wear performance and increased in vivo lifetime.