被子植物地下结实和地上/下两型结实的生态适应意义

地下结实和地上/下两型结实是被子植物两类独特的结实方式,多发生在陆生和草本植物中,主要生长在缺少水分或光照、土壤扰动频繁及环境波动较为剧烈的生境中。两种结实方式不仅是植物适应性进化的重要方面,也是选择性进化的产物。其中,地下结实对于植物在母株附近适宜微环境中保存后代、在极端环境下保持种子活力、逃避地面动物取食和火灾伤害以及延长果实发育时间等方面,地上/下两型结实对于减少同胞子代及种群内竞争、维持和扩大种群以及提高物种的适应力和进化可塑性等方面,都具有重要的生态适应意义,是植物抵御不利生物与非生物环境的两类重要防御策略。但两种结实方式同时也存在着限制果实与种子扩散、影响基因传递与种群遗传结构、加大种群隔离以及提高繁殖代价等进化限制,对物种的分布、种群增长、迁移、适合度和生活史进化等具有重要影响。目前,地下和地上/下两型结实现象分别在大约24科57属和13科34属中进行了报道,其中在菊科、十字花科、豆科和玄参科等类群中两种结实现象同时存在。从系统发育看,地下结实在木兰分支、单子叶植物分支及双子叶植物分支中均存在,而地上/下两型结实仅出现在单子叶植物分支和双子叶植物分支中,在被子植物基部类群(ANITA类群)中两种结实方式均不存在。该文对植物地下和地上/下两型结实的类型、系统进化、繁殖特性和扩散对策进行了介绍,并对其生态适应意义进行了总结,以期为深入研究植物结实的进化策略提供参考。

文冠果优良类型选择

以北京房山窦店9年生文冠果人工林为试验材料,以产量性状、品质性状,生长性状等为目标性状,开展以生态能源林为目标的优良类型选择。以植株花、果实等变异中较稳定的、容易识别的性状作为分类的依据,将文冠果初步划分为结实型和观花型2类。结实型主要是单瓣白花型。根据果实形状的不同,可进一步划分为小球果型、大球果型、圆柱果型、三棱果型、扁球果型、桃形果型、倒卵果型7类。利用层次分析法建立文冠果结实型优良类型评价指标体系,结果是小球果型综合性状最佳,是选优和推广优良类型,大球果型、圆柱果型次之。

大型肉皮兼用新兔种——塞北兔

塞北兔属于大型肉皮兼用新兔种,系张家口农业高等专科学校利用法系公羊兔与比利时巨兔进行二元输回杂交,经过杂交创新、选择定型、培育提高三个育种阶段,繁衍十二个世代,历时10年之久.培育而成。一、塞北兔的外貌特征塞北兔体型为长方形,体质为结实型,被毛为标准型。而且全身统一,分为三种,系三个品系。Ⅰ系,被毛为黄褐色,四肢内侧、腹部、尾巴腹面为浅白色;Ⅱ系,全身被毛为纯白色,红眼睛;Ⅲ系,设毛为米黄色。

甜高粱育种思路探讨

甜高粱生物产量高,含糖量高,乙醇转化率高,抗逆性强,是能源作物,对其合理开发利用,对我国粮食安全、能源安全具有重大意义。我国甜高粱育种水平落后,现有品种不能适应生产发展的需要。创新育种思路,可从选育粮糖兼用型品种和自交不结实的品种方面进行甜高粱品种选育。

澳大利亚引进食用菌菌种澳—1生理生活特性研究

[目的]获得食用菌菌种澳-1的相关生理生活特性,为以后的栽培出菇打下基础。[方法]进行母种、原种培养基配方的对比试验,对原基形成条件进行探索。[结果]得出该菌为一种高温型的恒温结实型草腐菌,需要较丰富的营养,机械刺激能加快原基的形成和数量。[结论]研究结果为澳大利亚引进种澳-1栽培提供了基础借鉴。

Rugged Resonant Pole and Its Applications in Soft-Switching Converter

The soft switching operation principle and operation performance of rugged resonant pole (RRP) is given. The applications of RRP in soft switching DC DC converter and soft switching inverter are discussed in detail. RRP can constitute buck boost soft switching DC DC converter and isolated soft switching DC DC converter with the automatic limitation performance of output power. Partial series resonant DC DC converter with RRP can realize the zero voltage/zero current switching of power devices. RR...

Effect of Enhanced UV-B Radiation on Seed Setting Rate and 1 000-grain Weight of Indica Hybrid Rice Restorer Lines

[Objective] This study was to investigate the effect of enhanced UV-B radiation on seed setting rate and 1 000-grain weight of hybrid rice combinations. [Method] The seed setting rate and 1 000-grain weight of 10 new sterile indica restorer lines planted in pots under enhanced UV-B radiation and fluorescent lamps （control） were respectively measured, and the differences were compared. [Result] The enhanced UV-B radiation significantly reduced the seed setting rate of indica restorer lines, and the differences between that UV-B radiation treatment and control all reached extremely significant level. In addition, the enhanced UV-B radiation reduced the 1 000-grain weight of most indica restorer lines, and compared with that of control the difference achieved significant or very significant level. However, the effect of enhanced UV-B radiation on seed setting rate and 1 000-grain weight differed to different indica restorer lines, and the differences among restorer lines tested were significant or very significant, which indicated the possibility to screen antiUV-B radiation rice materials and combinations. Finally, the indica restorer lines 09R-14, Luhui 37 and 10R-7703 which were strongly resistant to UV-B radiation were screened out. [Conclusion] This study laid foundation for breeding hybrid rice varieties resistance to UV-B radiation.

黄伞房栅架床栽培法

黄伞,又名柳蘑、黄蘑、多脂鳞伞。菇盖滑嫩爽口,菌柄清脆幼嫩,独具风味,可与牛肝菌相媲美。黄伞属木腐性菌类,纤维素、木质素和淀粉是主要碳源。其生活习性为中温偏低和变温结实型。菌丝生长最适温度23～25℃,超过28℃变黄,生长受到抑制。子实体形成与发育适温15～20℃,18℃时原基分化较快,超过21℃时有的品种子实体形成困难。

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous （ARMAX） input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this papel; the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves; secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.

Bile duct ligation in rats: A reliable model of hepatorenal syndrome?

The two most widely used experimental models of advanced liver disease are the administration of carbon tetrachloride, and common bile duct ligation (BDL), however, neither has been systematically evaluated as a model of hepatorenal syndrome (HRS). The BDL model in rats, studied at diverse time points, induced a progressive renal dysfunction without structural changes in the kidney. The authors concluded that BDL is a good model for further studies of HRS and its treatment. However, the renal impairment observed at the acute phase of the BDL model is based on a different pathophysiology than that of HRS. Specifi cally, in acute obstructive jaundice, cholemia predominates over parenchymal liver disease (reversible at this stage without portal hypertension or cirrhosis) and independently induces negative inotropic and chronotropic effects on the heart, impaired sympathetic vasoconstriction response and profound natriuresis and diuresis that might lead to volume depletion. In addition, systemic endotoxemia contributes to the prerenal etiology of renal impairment and promotes direct nephrotoxicity and acute tubular necrosis. On the other hand, the renal failure observed in the chronic BDL model (with development of biliary cirrhosis, portal hypertension and ascites) shares pathophysiological similarities with HRS, but the accordance of the chronic BDL model to the diagnostic criteria of HRS (e.g. absence of spontaneous bacterial peritonitis, no renal function improvement after plasma volume expansion) should have been confirmed. In conclusion, we think that the BDL model is not suitable for the study of the natural history of HRS, but the chronic BDL model might be valid for the study of established HRS and its potential therapies.

Modeling of Rocks with Spatial Distributed Fractures by Random Medium Theory

By using the spectrum expanding theory of random processes and Hudson's crack model,we developed a random medium model for rocks with spatial random distributed number density of cracks. This model could connect the micro-parameters of the cracks with the macro- mechanical properties, and can be effectively applied to model the real inhomogeneous medium. Numerical example indicates that the random distribution characters could be different for different elastic constants under the same random distribution of number density of cracks. By changing the value of the autocorrelation length pair, it is possible to model the difference of the distribution in the two coordinate directions. Numerical modeling results for seismic wave propagating in rocks with random distributed fractures using a staggered high-order finite-difference (SHOFD) are also presented.

Modifi cation of sleep architecture in an animal model of experimental cirrhosis

AIM： To analyze the polygraphic sleep patterns during cirrhosis progression in a rat model by repeated CCh administration. METHODS： Male Wistar rats received three weekly injections of CCl4 for 11 wk, and were analyzed before and during the induction of cirrhosis. Rats were im- planted with electrodes to record their sleep patterns. Polygraph recordings were made weekly over 11 wk for 8 h, during the light period. After a basal recording, rats received three weekly injections of CCl4. Histological confirmation of cirrhosis was performed after 11 wk. RESULTS： The results showed a progressive decrease in total wake time that reached statistical significance from the second week of treatment. In addition, there was an increase in total time of slow wave sleep （SWS）Ⅱ and rapid eye movement sleep （REM sleep） in most of the 11 wk. SWS I showed no significant variations. During the final weeks, a significant increase in REM sleep frequency was also observed. Histological analyses of the livers showed unequivocal signs of cirrhosis. CONCLUSION： These data suggest that hepatic failure produced by CCh administration is capable of modifying the sleep pattern even after only a few doses.

Practical Model for Real Structure and Performance of Heavy Vehicles

In this paper, a new practical model for real heavy vehicle structure is developed to investigate dynamic responses under steering/acceleration or braking maneuvers. The generalized six DoFs （degrees-of-freedom） nonlinear vehicle model M1 including longitudinal, lateral, yaw, vertical, roll and pitch dynamics is validated using the measured data reported in different studies. This model takes the CG （center of gravity） of sprung mass, unsprung mass and total vehicle mass into account. Based on this model, the effects of the inertia parameters on the vehicle dynamic responses are investigated for more comprehensive assessments of the model structure. Another nonlinear vehicle model 342 derived from M1 which assumes that the vehicle has a single CG as reported in literature is also developed. The dynamic responses of the vehicle model Mj are compared with those of the model M2 to demonstrate the performance potential of the proposed nonlinear model. The results of dynamic responses with the nonlinear vehicle model MI suggest that the model could offer considerable potential in realizing enhanced ride and handling performance, as well as improved roll and pitch properties in a flexible manner.

Effects of basicity and temperature on mineralogy and reduction behaviors of high-chromium vanadium-titanium magnetite sinters

The effects of basicity and temperature on the reduction process of Hongge high-chromium vanadium-titanium magnetite(HCVTM)sinter were investigated in this work.The main characterization methods of X-ray fluorescence(XRF),X-ray diffraction(XRD),scanning electron microscope(SEM),and metallographic microscope were employed in this study.In this work,the reduction of HCVTM sinter with different temperature and basicity were experimented.The Fe,FeO,and TiO in reductive samples increase with increasing basicity and temperatures.The increase of basicity and temperature is favorable to the reduction of HCVTM sinter.The Fe phase has out-migration tendency to the surface of sinter while the perovskite and silicate phases have in-migration tendency to the inside of sinter.The reduction degradation index(RDI)decreases while the reduction index(RI)increases with increasing basicity.The RI increases from 67.14%to 82.09%with increasing temperature from 1073 K to 1373 K.

Rheological catastrophic model for soft clays

A brief review of the former studies on the mechanisms of soil rheology and microstructure is presented. Then a microstructure model and a set of rheological constitutive relations for sott clays, which describe how the rheological consolidation settlement develops, are established in the framework of the catastrophe theory. The validity of this model is verified by a series of rheological consolidation experiments with different loading rates. The experimental data show that creep deformation can be clearly observed in these tests, and the consolidation settlement is loading rate dependent. The characteristics of the deformation can be explained and reproduced successfully using the model. It can be concluded that only the biggest set of voids would collapse for one load increment. Parameters in the model, k and η, are gained by curve fitting. With only two free parameters, good fits of the data are achieved.

Research on Simulation and Test of the Nonlinear Responses for the Hydraulic Shock Absorber

Basically on the multi-body system dynamics,the virtual prototype of the hydraulic shock absorber for the bench test is developed in the ADAMS environment.Dynamic behaviors of the absorber are studied by both computer simulation and real test.Numerical predictions of dynamic responses are produced by the established virtual prototype of the absorber and compared with experimental results.It has been shown from the comparison that the vibration behaviors of the prototype with hysteretic damping characteristics are considered to be more identical with the bench test results than those of the same prototype with piecewise linear damping properties are.The current virtual prototype of the shock absorber is correct and can be a developing terrace for the optimizing design of the absorber and matching capability of the whole car.

3D Simulation of Two-bar Warp-knitted Structures

In this study, 3D computer modeling of simple warp-knitted structures is achieved based on 3D model of warp-knitted loops. Firstly, according to the studying on the geometric structure of warp-knitted loops, Goktepe＇s 3D solid yarn model is developed, and the dimensions of the warp-knitted loops are obtained; then 3D models of stitch defined by eleven given points and in-lay defined by five given points are built with the method of Non-Uniform Rational B-Spline （NURBS） curves and surfaces. Secondly, according to the chain notations of warp-knitted structures, the loop＇s shape can be decided, and with the 3D models the loops can be connected freely and smoothly in some special warp-knitted structures, such as miss-lapping and two- course in-lay. At last, with the tools of Visual C ＋＋ and OpenGL, computer 3D simulation of two-bar warp-knitted fabrics is successfully realized, taking the factor of fabric light and materials into 3D structural model.

An Application of Damage Detection Methods to A Real World Structure Subjected to Ground Motion Excitation

This paper aims at investigating the efficacy of different state-of-art damage detection methods when applied to real worm structures subjected to ground motion excitations, for which the literature contributions are, at present, still not fully comprehensive. To this purpose the paper analyses two test structures： （1） a four-story scaled steel frame tested on a shake table in a controlled laboratory conditions, and （2） a seven-story reinforced concrete building monitored during the seismic excitations of the 1999 Chi-Chi （Taiwan） Earthquake main shock and numerous fore and afiershocks. Some model based damage approaches and statistics based damage indexes are reviewed. The different methodologies and indexes are, then, applied to the two test structures with the final aim of analysing their performance and validity within the case of a laboratory scaled model and a real world structure subjected to input ground motion.

Examples for Application of Gravitational Model in the Investigation of Spatial Structure

In this paper the authors wish to introduce an application of the gravitational model through two concrete examples. In their investigation the gravitational model was transformed to analyze the spatial structure of Europe, and the impact of accessibility in Hungary. In this analysis not only the size of gravitational forces but their direction can also be measured. Displacements were illustrated by a bi-dimensional regression, which gives a new perspective to the investigation of spatial structure.

The response of collision speed caused by the large bus to new flexible barrier

In order to study the response of collision speed caused by the large bus to new flexible barrier,in this paper,with the large bus as the carrier,the full-scale impact tests between flexible barrier and vehicle with the impact velocities of 40 km/h and 60 km/h were carried out separately,following the procedures of the test preparation,test processing,data acquisition, etc,which were based on the test platform of the Large Structure Crash Testing Laboratory of Changsha University of Science and Technology. The important test results which contain the damage of vehicles and barrier,the moving locus of vehicle,the occupant risk index,the maximum dynamic deformation, etc,were obtained through the analysis under the different collision speeds. These provide the necessary reference basis for the further research on the structure topology optimization and improve the comprehensive constraint performance to the flexible barrier.